DATA SHEET Solid State Relay OCMOS FET PS710CL2-1A 4-PIN DIP, 0.1 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET −NEPOC Series− DESCRIPTION The PS710CL2-1A is a solid state relay containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. The PS710CL2-1A has a surface mount type with 10.16 mm lead pitch. FEATURES • Low on-state resistance (Ron = 0.1 Ω TYP.) • Large continuous load current (IL = 2.0 A) • 1 channel type (1 a output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (4-pin DIP) • Low offset voltage • Ordering number of taping product: PS710CL2-1A-E3, E4 APPLICATIONS • Measurement equipment • FA equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10164EJ01V0DS (1st edition) Date Published June 2002 CP(K) Printed in Japan NEC Compound Semiconductor Devices 2002 PS710CL2-1A PACKAGE DIMENSIONS (UNIT: mm) 9.25±0.5 *1 0.5 MAX. PS710CL2-1A TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET Drain 4. MOS FET Drain 1 *1 2 10.16 1.34±0.1 0.25 M 0.3±0.3 3.5±0.3 6.5 *1 0.75±0.5 2.54 11.8±0.4 *1 Cut the lead 2 Data Sheet PN10164EJ01V0DS PS710CL2-1A MARKING EXAMPLE No. 1 pin Mark Country Assembled PS710C-1A NE000 Assembly Lot 0 00 N Week Assembled Year Assembled (Last 1 Digit) In-house Code Rank Code Nothing Solder Dipping E Solder plating Data Sheet PN10164EJ01V0DS 3 PS710CL2-1A ORDERING INFORMATION Part Number PS710CL2-1A PS710CL2-1A-E3 Package 4-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS710CL2-1A Embossed Tape 1 000 pcs/reel PS710CL2-1A-E4 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10164EJ01V0DS *1 PS710CL2-1A ABSOLUTE MAXIMUM RATINGS (TA = 25°°C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 60 V IL 2.0 A ILP 4.0 A PD 600 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 650 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C Diode Power Dissipation Peak Forward Current MOS FET *1 Load Voltage Continuous Load Current Connection A *2 Pulse Load Current *3 (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 µs, Duty Cycle = 1% *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. 1 4 Connection A 2 IL 3 VL (AC/DC) L *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Data Sheet PN10164EJ01V0DS 5 PS710CL2-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°°C) Parameter Diode MOS FET Coupled Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V 5.0 µA Off-state Leakage Current ILoff VD = 60 V 1.0 µA Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 2.0 A On-state Resistance 320 pF 2.0 mA Ron IF = 10 mA, IL = 2.0 A, t ≤ 10 ms 0.1 0.15 Ω Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, 1.0 3.0 ms Turn-off Time *1, 2 toff PW ≥ 10 ms 0.05 1.0 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz Ω 9 10 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50% Input 0 VO = 5 V Input monitor 90% VO monitor Output Rin RL 10% ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10164EJ01V0DS PS710CL2-1A TYPICAL CHARACTERISTICS (TA = 25°°C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 3.0 Maximum Load Current IL (A) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 50 75 85 2.5 2.0 1.5 1.0 0.5 0.0 –25 100 0 25 50 75 85 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 100 500 1.6 1.4 1.2 1.0 0.8 –25 0 25 50 75 Output Capacitance Cout (pF) Forward Voltage VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 400 300 200 100 0 100 20 40 80 120 Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE 3.0 IF = 10 mA VD = 60 V 2.0 Load Current IL (A) 10–7 10–8 10–9 10 100 Ambient Temperature TA (˚C) 10–6 Off-state Leakage Current ILoff (A) 60 1.0 –0.45 –0.30 0 –0.15 0.15 0.30 0.45 –1.0 –10 10–11 0 –2.0 20 40 60 80 –3.0 Load Voltage VL (V) Ambient Temperature TA (˚C) Data Sheet PN10164EJ01V0DS 7 PS710CL2-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 30 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, IL = 2.0 A 2.5 2.0 1.5 1.0 0 25 50 10 On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 6.0 4.0 2.0 0 10 30 20 0.4 0.3 0.2 40 0 10 30 20 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 15 10 20 15 10 5 5 1.0 2.0 0 0.04 0.08 Turn-off Time toff (ms) Turn-on Time ton (ms) Data Sheet PN10164EJ01V0DS 40 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 Number (pcs) 20 0 VO = 5 V, RL = 500 Ω 0.1 30 8 0.11 0.10 Ambient Temperature TA (˚C) Turn-off Time toff (ms) Turn-on Time ton (ms) 15 0 100 75 VO = 5 V, RL = 500 Ω Number (pcs) 20 5 0.5 0.0 –25 n = 50 pcs, IF = 10 mA, IL = 2.0 A, t 10 ms 25 Number (pcs) Normalized On-state Resistance Ron 3.0 PS710CL2-1A NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 3.0 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10164EJ01V0DS 9 PS710CL2-1A TAPING SPECIFICATIONS (UNIT: mm) 4.6 MAX. 12.5±0.1 11.5±0.1 1.55 +0.1 –0 24.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 10.4±0.1 2.05±0.05 12.0±0.1 Tape Direction PS710CL2-1A-E3 PS710CL2-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 φ 21.0±0.8 φ 100±1.0 R 1.0 φ 330±2.0 2.0±0.5 φ 13.0±0.5 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10164EJ01V0DS 23.9 to 27.4 Outer edge of flange PS710CL2-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10164EJ01V0DS 11 PS710CL2-1A • The information in this document is current as of June 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 12 Data Sheet PN10164EJ01V0DS PS710CL2-1A SAFETY INFORMATION ON THIS PRODUCT Caution GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. • Do not destroy or burn the product. • Do not cut or cleave off any part of the product. • Do not crush or chemically dissolve the product. • Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage. Business issue NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-3-3798-6372 FAX: +81-3-3798-6783 E-mail: [email protected] NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-528-0302 TEL: +82-2-528-0301 NEC Electron Devices European Operations http://www.nec.de/ TEL: +49-211-6503-101 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Technical issue NEC Compound Semiconductor Devices, Ltd. http://www.csd-nec.com/ Sales Engineering Group, Sales Division E-mail: [email protected] FAX: +81-44-435-1918 0110