ETC CP-8108

光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
General Description:
CP8108 for 8102 IC is the control IC of remote fan, built-in ON/OFF,
SPEED, TIME, RHY/SLP, OSC 5 keys, and 8 LEDs to display the
status of speed & timer.
Features:
l 3 Winds: NORMAL, RHY, SLP
l 5 Keys: ON/OFF, SPEED, TIME, RHY/SLP, OSC
l 4 Speeds available: Ultra Low (UL), Low (L), Medium (M), Strong (S)
l 8 LEDs: display speeds: UL, L, M, S; time setting: 1H, 2H, 4H ; SLP
l 4 outputs: 3 speeds output: L, M, S & OSC output
l ON/OFF KEY: memorize the last status, except timer
l ON/OFF、SPEED、TIME、RHY/SLP、OSC also controlled by remote
l Co-operation remote control IC: CP8223R
l W/buzzer output
Block Diagram:
BUZZER
OSCI
OSCO
4MHZ
OSC
COUNTER/TIMER
OUTPUT
CKT
REMOTE
DECODER
LED
SPEED
CONTROL
ON/OFF
SPEED
TIMER
RHY/SLP
OSC
BUZZER
S
M
L
UL
LED SLP
LED 1H
LED 2H
LED 4H
LED UL
LED L
LED M
LED S
KEY/ROMOTE
CONTROL
RHYROM
OSCILLATING
OUTPUT
OSC
Rev 1.0 June 23,2000
1/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
Function:
A. ON/OFF key:
1ST pressing on ON/OFF is ON, and 2nd pressing is OFF. Each pressing
makes buzzer bi a sound.
B. SPEED key:
When fan works, it will automatically start at SPEED L & LED L lights on.
Once SPEED key pressed again, from SPEED L to SPEED M, LED L lights off
& LED M lights on. The next pressing is from SPEED M to SPEED S, and the
following from SPEED S to SPEED UL. The action L à M à S à UL à L àM,
accompaning with led display & buzzer bi, makes a circulation.
C. TIME key:
When TIME pressed, LED 1H lights ON as 1hr time setting. Pressed again,
LED 1H lights OFF & LED 2H lights ON as 2hrs time setting. Timer action as
same as LED display, OFFà1hà2hà4hàOFF, makes a cycle. Each pressing
makes the buzzer bi a sound. LED displays the remaining time. 2hrs later, if
timer is set at 4H, LED 2H lights ON & LED 4H lights OFF. It means 2hrs left.
Then, after 1hr, LED 1H lights ON & 2H OFF; It means 1hr left. After the last 1hr,
fan and all LEDs light OFF.
D. RHY/SLP key:
Fan is ON, in the normal wind. Upon RHY/SLP key pressed, it turns to RHY
and the LED displaying the speed blinks. RHY/SLP key pressed again, LED
SLP lights on but not blinks. That is, it turns to the status RHY/SLP. And the key
pressed again, it turns to OFF & LED SLP lights off. Each pressing makes
Buzzer bi a sound.
E. OSC KEY:
When OSC key is pressed, in fan’s working, OSC works. The key pressed
again, OSC stops. Each pressing makes the buzzer bi a sound.
F. BUZZER bi: 4KHz
G. Oscillation frequency: 4MHZ
H. Function of remote controller keys: same as above
Rev 1.0 June 23,2000
2/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
RHY Mode:
In RHY mode, LED displays the present status in RHY L, M, or S. When
RHY L pressed, LED L blinks; and the same action is with RHY M & S. LED
display changes with RHY MODE L, M, or S but not with SPEED.
Speed cycle of RHY is as follows:
UL RHY
L1
1.5
4
OFF
1.5
2
5
6
3
5
3
50 SEC
1.5
3
1
4
5
3.5
TIME
L RHY
3
L 2
3
OFF
3
4
2
3
2
3
4
5
3
47 SEC
4.5
1.5
2
2
TIME
M RHY
M
2
2.5
1
3.5
L
3
5
3
2
2.5
5
3
2
OFF
3
3.5
3
3
47 SEC
TIME
S RHY
S 2
M
L
OFF
2.5
2.5
4
2
2.5
2
3.5
2
3.5
4.5
5.5
1.5
51 SEC
5.5
2.5
3
TIME
Rev 1.0 June 23,2000
3/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
SLP Mode:
NOTE :A. If SPEED changed, in SLEEP MODE, restarts to clock.
B. If TIMER finishes the setting time, all turns to light OFF.
Speed cycle of SLP is as follows:
RHY
UL SLP
TIME UP
UL
TIME
OFF
0.5H
1H
1.5H
2H
2.5H
3H
3.5H
4H
RHY
L SLP
L
TIME UP
UL
OFF
TIME
0.5H
1H
1.5H
2H
2.5H
3H
3.5H
4H
RHY
M SLP
M
L
TIME UP
UL
OFF
TIME
0.5H
1H
1.5H
2H
2.5H
3H
3.5H
4H
RHY
S SLP
S
M
L
TIME UP
UL
TIME
OFF
0.5H
1H
1.5H
2H
2.5H
3H
3.5H
4H
Rev 1.0 June 23,2000
4/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
Package Diagram:
DIP-28
VDD
1
28
VSS
VDD
2
27
OSCI
SENSOR
3
26
OSCO
OSC-O
4
25
REST
OPT1
5
24
REMOTE
OPT2
6
23
ON/OFF
BO
7
22
LED UL
S-O
8
21
LED L
M-O
9
20
LED M
L-O
10
SPEED
11
18
LED 1H
TIMER
12
17
LED 2H
RHY/SLP
13
16
LED 4H
OSC
14
15
LED SLP
LED S
Rev 1.0 June 23,2000
5/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
DC Characteristics:VDD=2.7 to 5.5V,Ta= -40 to +85℃
PARAMETER
HIGH-LEVEL
INPUT
VOLTAGE
LOW-LEVEL
INPUT
VOLTAGE
HIGH-LEVEL
OUTPUT
VOLTAGE
LOW-LEVEL
OUTPUT
VOLTAGE
SYMBOL
VIH1
VIH2
VIH3
VIL1
VIL2
VIL3
VOH
VOL1
VOL2
CONDITIONS
MIN.
OSC, L, OPT2, LED UL, LED 1H, ON/OFF
RST, SIN
OSCI
OSC, L, OPT2, LED UL, LED 1H, ON/OFF
RST, SIN
OSCI
4.5≦VDD≦5.5
IOH=-1.0mA
OSC, L, OPT2
2.7≦VDD≦4.5
IOH=-0.5mA
4.5≦VDD≦5.5
OSC, L, OPT2, LED UL, IOH=1.0mA
LED 1H
2.7≦VDD≦4.5
IOH=0.5mA
4.5≦VDD≦5.5
OSC AND LED 1H
IOL=15mA
2.7≦VDD≦4.5
TYP.
0.7VDD
0.8VDD
VDD-0.5
0
0
0
MAX
UNIT
VDD
VDD
VDD
0.3VDD
0.2VDD
0.4
V
V
V
V
V
V
VDD-0.3
V
VDD-0.3
V
0.3
V
0.3
V
1.0
2.0
V
V
HIGH-LEVEL
INPUT LEAKAGE
CURRENT
ILIH
OSC, L, OPT2, LED UL, LED 1H ,ON/OFF
VIN = VDD
3
μA
HIGH-LEVEL
INPUT LEAKAGE
CURRENT
ILIL
OSC, L, OPT2, LED UL, LED 1H ,ON/OFF
VIN = 0V
-3
μA
HIGH-LEVEL
INPUT LEAKAGE
CURRENT
ILOH
OSC, L, OPT2, LED UL, LED 1H
VOUT = VDD
3
μA
HIGH-LEVEL
INPUT LEAKAGE
CURRENT
ILOL
OSC, L, OPT2, LED UL, LED 1H
VOUT = 0V
-3
μA
BUILT-IN PULL-UP
TESISTANCE
RPULL
200
30
4.5
3.3
1.5
1.7
1.0
2.0
1.9
1.0
1.5
0.9
10
10
KΩ
KΩ
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
μA
μA
IDD1
POWER
SUPPLY
CURRENT
IDD2
IDD3
OSC, L, LED 1H, ON/OFF, RST, SIN
LED UL
fx=8.0MHZ, VDD = 5V ±10
fx=4.0MHZ, VDD = 5V ±10
NORMAL
OPERATION fx=2.0MHZ, VDD = 3V ±10
MODE
VDD=5V ±10
fx=400KHZ
VDD=3V ±10
fx=8.0MHZ, VDD = 5V ±10
fx=4.0MHZ, VDD = 5V ±10
HALT
fx=2.0MHZ, VDD = 3V ±10
MODE
VDD=5V ±10
fx=400KHZ
VDD=3V ±10
VDD=5V ±10 %
STOP
MODE
VDD=3V ±10 %
50
3
%
%
%
%
%
%
%
%
%
%
100
10
2.0
1.4
0.5
0.9
0.3
1.0
0.9
0.3
0.7
0.3
3.0
2.0
Rev 1.0 June 23,2000
6/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102
Pin Description:
PIN NAME
VDD
VDD
SENSOR
OSC-O
OPT1
OPT2
BO
S-O
M-O
L-O
SPEED
TIMER
RHY/SLP
OSC
LED SLP
LED 4H
LED 2H
LED 1H
LED S
LED M
LED L
LED UL
ON/OFF
REMOTE
REST
OSCO
OSCI
VSS
PIN NUMBER I/O
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
P
P
I
O
----O
O
O
O
I
I
I
I
O
O
O
O
O
O
O
O
I
I
I
O
I
P
FUNCTION
POWER PIN (+)
POWER PIN (+)
TEMP. SENSOR INPUT
OSCILLATING OUTPUT
FUNCTION OPTION
note:1
FUNCTION OPTION
note:1
BUZZER OUTPUT 4KHz
STRONG OUTPUT
MID OUTPUT
LOW OUTPUT
SPEED INPUT KEY
TIMER INPUT KEY
RHY/SLP INPUT KEY
OSCILLATING INPUT KEY
SLP LED OUTPUT
TIMER(4H) LED OUTPUT
TIMER(2H) LED OUTPUT
TIMER(1H) LED OUTPUT
LED S OUTPUT
LED M OUTPUT
LED L OUTPUT
LED UL OUTPUT
ON/OFF INPUT KEY
REMOTE INPUT PIN
RESET INPUT PIN
CRYSTAL 4MHz
CRYSTAL 4MHz
POWER PIN (-)
Note 1:in CP8108 FOR CP8102
u OPT1 = LOW
u OPT2 = LOW
Rev 1.0 June 23,2000
7/9
光碁科技股份有限公司
C e r a m at e T e c h n i c a l C o . , L t d .
CP8108 FOR CP8102
Typical application Circuit (for reference only):
F1
R1
C2
D2
R3
AC1
L
R2
VAR
C1
T1
D1
S
T3
OSC
T4
ZD1
C3
AC2
M
T2
C4
C5
BU1
R13
VDD VDD
Q1
R14
ZD2
1
R15
SENSOR
3
OPT1 5
OPT2
C6
6
REMOTE 24
S1
SW1
ON/OFF 23
SW2
SPEED 11
SW3
TIMER 12
SW4
SW5
RHY/SLP
2
25
C P 8108 FO R C P 8 10 2
REST
BO
7
10
9
8
4
22
21
R4
R5
R6
R7
UL
L1
L
L2
M
L3
19
S
L4
18
1H
L5
2H
L6
4H
L7
SLP
L8
20
17
16
15
R8
R9
R10
OSCI
C7
27
13
OSC 14
L
M
S
OSC
X1
C8
26
OSCO
28
VSS
Rev 1.0 June 23,2000
8/9
光碁科技股份有限公司
Ceramate Technical Co., Ltd.
CP8108 FOR CP8102 + AUTO
Application Circuit BOM (for reference only):
POWER:110V
SPARE PARTS
VARISTOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
SPEC PARTS
07D221K
0.1μF
30pF
2.2μF / 250V
0.1μF / 250V
LOCATION
VAR
C5,C6
C7,C8
C2
C1
ELECTROLYTIC
CAPACITOR
ELECTROLYTIC
CAPACITOR
100μF / 50V
C3
470μF / 10V
C4
RESISTOR
RESISTOR
47Ω / 2W
470Ω / 2W
R1
R3
RESISTOR
RESISTOR
RESISTOR
100KΩ / 0.25W
1KΩ / 0.25W
470Ω / 0.25W
R2
R4~R7
R8~R10
RESISTOR
RESISTOR
RESISTOR
DIODE
ZENER DIODE
ZENER DIODE
LED
FUSE
CRYSTAL
OSCILLATOR
BUZZER
TRANSISTOR
IR RECEIVER
TACT SWITCH
TRIAC
IC
10KΩ / 0.25W
33KΩ / 0.25W
39KΩ / 0.25W
1N4004
5.1V / 0.5W
3.9V / 0.5W
as requirement
1A / 125V
R14
R13
R15
D1,D2
ZD1
ZD2
L1~L8
F1
4MHZ
X1
4 KHZ
2SA608
38 KHZ
as requirement
IGT = 3~5 mA
CP8108
BU1
Q1
S1
SW1~SW5
T1~T4
U1
Rev 1.0 June 23,2000
9/9