MAXIM MAX9918ASA+

19-5015; Rev 0; 11/09
KIT
ATION
EVALU
E
L
B
AVAILA
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
Features
The MAX9918/MAX9919/MAX9920 are single-supply,
high-accuracy current-sense amplifiers with a high
input common-mode range that extends from -20V to
+75V. These amplifiers are well suited for current monitoring of inductive loads such as motors and solenoids,
where common-mode voltages can become negative
due to inductive kickback, reverse-battery conditions,
or transient events.
The MAX9918/MAX9920 feature adjustable gain set by
an external resistive-divider network. The MAX9919 features fixed gains of 45V/V (MAX9919F) and 90V/V
(MAX9919N). The MAX9918/MAX9919/MAX9920 operate as unidirectional amplifiers when VREFIN = GND
and as bidirectional amplifiers when VREFIN = VCC/2.
The MAX9920 attenuates the input signal by a factor of
4 at the input level-shifting stage allowing the device to
sense voltages up to 200mV (unidirectional operation)
or ±100mV (bidirectional operation).
o -20V to +75V Input Common-Mode Voltage Range
o 400µV (max) Input Offset Voltage
o 0.6% (max) Gain Accuracy Error
o Uni- or Bidirectional Current Sensing
o Reference Input for Bidirectional OUT
o 120kHz, -3dB Bandwidth (MAX9919N)
o Single-Supply Operation (4.5V to 5.5V)
o 1mA Supply Current
o 0.5µA (typ) Shutdown Current
o Rail-to-Rail Output
o -40°C to +125°C Automotive Temperature Range
Ordering Information/
Selector Guide
The MAX9918/MAX9919/MAX9920 operate with a single 5V supply voltage, are fully specified over the -40°C
to +125°C automotive temperature range, and are
available in an 8-pin SOIC package.
VSENSE
(mV)
GAIN
(V/V)
MAX9918ASA+
50
Adjustable
8 SOIC-EP*
H-Bridge Motor Current Sensing
Solenoid Current Sensing
MAX9919FASA+
50
45
8 SOIC-EP*
MAX9919NASA+
50
90
8 SOIC-EP*
Current Monitoring of Inductive Loads
High- and Low-Side Precision Current Sensing
4x4 Transmission Control
MAX9920ASA+
200
Adjustable
8 SOIC-EP*
PART
Applications
PIN-PACKAGE
Note: All devices operate over the -40°C to +125°C temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
Electronic Throttle Control
Super-Capacitor Charge/Discharge Monitoring in
Hybrid Cars
Precision High-Voltage Current Monitoring
*EP = Exposed pad.
Typical Operating Circuit
VCC
VCC
VBATT
φ2B
φ1A
MAX9918
MAX9920
RSENSE
A
OUT
R2
M
FB
RS+
RSφ2B
ADC
INPUT STAGE
LEVEL SHIFTER
R1
REFIN
REF
ADJUSTABLE GAIN
φ1B
SHDN
GND
µC
GND
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
MAX9918/MAX9919/MAX9920
General Description
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
ABSOLUTE MAXIMUM RATINGS
VCC to GND ..............................................................-0.3V to +6V
RS+, RS- to GND (VCC = 5V) ..................................-30V to +80V
RS+, RS- to GND (VCC = 0V) .............-15V to +80V (15 minutes)
Differential Input Voltage (VRS+ - VRS-)
(MAX9918/MAX9919).................................±15V (Continuous)
Differential Input Voltage
(VRS+ - VRS-) (MAX9920) .............................±5V (Continuous)
REFIN, FB, OUT to GND.............................-0.3V to (VCC + 0.3V)
SHDN to GND.........................................................-0.3V to +20V
Output Short Circuit to VCC or GND...........................Continuous
Continuous Current into Any Pin
(Not to exceed package power dissipation) ................±20mA
Continuous Power Dissipation (TA = +70°C)
8-Pin SOIC-EP (derate 24.4mW/°C above +70°C) .1951.2mW**
SOIC Package Junction-to-Ambient
Thermal Resistance (θJA) (Note 1)...............................41°C/W
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Reflow Soldering Temperature ........................................+260°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a fourlayer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
**As per JEDEC51 Standard (multilayer board).
ELECTRICAL CHARACTERISTICS
(VCC = 5V, VRS+ = VRS- = +14V, VSENSE = (VRS+ - VRS-) = 0V, VSHDN = VGND = 0V, VREFIN = VCC/2, RL = 100kΩ; for MAX9918, AV =
90V/V, R2/R1 = 89kΩ/1kΩ; for MAX9920, AV = 20V/V, R2/R1 = 79kΩ/1kΩ; TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
VRS+ = VRS- =
+14V, VREFIN
= 0V
MAX9918
VRS+ = VRS- =
-2V, VREFIN =
0V
VRS+ = VRS- =
+14V, VREFIN
= 0V
Input Offset Voltage (Note 2)
VOS
MAX9919_
VRS+ = VRS- =
-2V, VREFIN =
0V
VRS+ = VRS- =
+14V, VREFIN
= 0V
MAX9920
VRS+ = VRS- =
-2V, VREFIN =
0V
2
MIN
TA = +25°C
TYP
MAX
±0.14
±0.4
TA = -40°C
to +125°C
TA = +25°C
±0.7
±0.08
TA = -40°C
to +125°C
TA = +25°C
±0.18
±0.11
±0.4
±1.0
±0.48
TA = -40°C
to +125°C
TA = +25°C
±0.4
±0.9
TA = -40°C
to +125°C
TA = +25°C
±0.4
±1.3
TA = -40°C
to +125°C
TA = +25°C
UNITS
±1.2
±3.0
±0.10
TA = -40°C
to +125°C
_______________________________________________________________________________________
±0.9
±3.5
mV
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
(VCC = 5V, VRS+ = VRS- = +14V, VSENSE = (VRS+ - VRS-) = 0V, VSHDN = VGND = 0V, VREFIN = VCC/2, RL = 100kΩ; for MAX9918, AV =
90V/V, R2/R1 = 89kΩ/1kΩ; for MAX9920, AV = 20V/V, R2/R1 = 79kΩ/1kΩ; TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1
PARAMETER
SYMBOL
CONDITIONS
MAX9918
Input Offset Voltage Drift
(Note 3)
VOSD
MAX9919_
MAX9920
Common-Mode Range
VCM
CMRR
MAX9920
Input Bias Current
IRS+, IRS-
Input Offset Current
-20V ≤ VCM ≤ +75V
VRS+ = VRS- = -2V
±3.3
VRS+ = VRS- = +14V
±1.8
VRS+ = VRS- = -2V
±1.8
VRS+ = VRS- = +14V
±2.4
VRS+ = VRS- = -2V
±8.8
-2V ≤ VCM ≤ +14V
96
72
-20V ≤ VCM ≤ +75V
86
±175
TA = -40°C to +125°C
±250
Input Leakage Current
VRS+ = VRS- = +14V, +75V, VCC = 0V
Input Resistance
MAX9920
Gain (Notes 2, 4)
G
Minimum Adjustable Gain
GADJ
Inferred from gain
error test
V
dB
TA = +25°C
-20V ≤ VCM ≤ +75V, VSHDN = VCC = 5V
UNITS
µV/°C
+75
0
MAX9918,
MAX9919_
MAX
80
-2V ≤ VCM ≤ +14V
(IRS+ - IRS-)
VSENSE
-20
-20V ≤ VCM ≤ +75V
Input Leakage Current in
Shutdown
Full-Scale Sense Voltage (Note 4)
TYP
±1.2
Inferred from CMRR tests
MAX9918, MAX9919
Common-Mode Rejection Ratio
(Note 3)
MIN
VRS+ = VRS- = +14V
µA
±8
µA
±30
µA
±30
µA
Common mode
300
kΩ
Differential
715
Ω
Common mode
330
kΩ
Differential
224
Ω
MAX9918, MAX9919_
50
MAX9920
200
MAX9918, MAX9920
Adj
MAX9919F
45
MAX9919N
90
MAX9918
30
MAX9920
7.5
mV
V/V
V/V
_______________________________________________________________________________________
3
MAX9918/MAX9919/MAX9920
ELECTRICAL CHARACTERISTICS (continued)
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
ELECTRICAL CHARACTERISTICS (continued)
(VCC = 5V, VRS+ = VRS- = +14V, VSENSE = (VRS+ - VRS-) = 0V, VSHDN = VGND = 0V, VREFIN = VCC/2, RL = 100kΩ; for MAX9918, AV =
90V/V, R2/R1 = 89kΩ/1kΩ; for MAX9920, AV = 20V/V, R2/R1 = 79kΩ/1kΩ; TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1
PARAMETER
SYMBOL
CONDITIONS
VRS+ = VRS- =
+14V
MAX9918
VRS+ = VRS- =
-2V, VREFIN =
0V
MAX9919F
Gain Error
(Note 2)
GE
MAX9919N
VRS+ = VRS- =
-2V, VREFIN =
0V
FB Input Bias Current
Output-Voltage High (Note 4)
Output-Voltage Low (Note 4)
Short-Circuit Current
Output Resistance
IFB
TA = +25°C
UNITS
±0.6
±1.0
±0.13
±0.45
±1.2
±0.10
TA = -40°C to
+125°C
±0.45
±0.9
±0.16
%
±0.6
±1.2
TA = +25°C
±0.11
TA = -40°C to
+125°C
±0.6
±1.0
±0.29
±1.0
±1.7
TA = +25°C
±0.24
TA = -40°C to
+125°C
±1.0
±1.7
MAX9918, MAX9920
5
15
RL = 100kΩ to GND
3
10
RL = 10kΩ to GND
12
40
RL = 100kΩ to VCC
3
10
RL = 10kΩ to VCC
10
40
nA
mV
mV
44
mA
41
ROUT
Ω
0.1
0
VCC
/2
VCC 1.9
0
VCC
/2
VCC 2.4
Inferred from REFIN
CMRR test
V
MAX9920
4
±0.6
±0.02
TA = +25°C
MAX9918, MAX9919_
REFIN Voltage Range
±0.08
TA = -40°C to
+125°C
VRS+ = VRS- = TA = +25°C
+14V, VREFIN = TA = -40°C to
0V
+125°C
VSENSE = 200mV for
MAX9918, MAX9919_,
VCC - VOH
VSENSE = 400mV for
MAX9920
VSENSE = -200mV for
MAX9918, MAX9919_,
VOL
VSENSE = -400mV for
MAX9920
OUT shorted to VCC
ISC
OUT shorted to GND
MAX
±1.2
VRS+ = VRS- = TA = +25°C
+14V, VREFIN = TA = -40°C to
0V
+125°C
VRS+ = VRS- =
-2V, VREFIN =
0V
TYP
TA = -40°C to
+125°C,
VREFIN = 0V
VRS+ = VRS- = TA = +25°C
+14V, VREFIN = TA = -40°C to
0V
+125°C
VRS+ = VRS- =
-2V, VREFIN =
0V
MAX9920
MIN
TA = +25°C,
VREFIN = 0V
_______________________________________________________________________________________
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
(VCC = 5V, VRS+ = VRS- = +14V, VSENSE = (VRS+ - VRS-) = 0V, VSHDN = VGND = 0V, VREFIN = VCC/2, RL = 100kΩ; for MAX9918, AV =
90V/V, R2/R1 = 89kΩ/1kΩ; for MAX9920, AV = 20V/V, R2/R1 = 79kΩ/1kΩ; TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1
PARAMETER
REFIN Common-Mode Rejection
Ratio
REFIN Current
SYMBOL
SHDN Logic-High
VIH
SHDN Logic-Low
VIL
0V ≤ VREFIN ≤ (VCC
- 1.9V)
82
103
MAX9920
0V ≤ VREFIN ≤ (VCC
- 2.4V)
75
90
VCC
PSRR
MAX9920, VRS+ = VRS- = ±200mV
±100
2.0
Inferred from PSRR test
MAX9918, MAX9919_
4.5V ≤ VCC ≤ 5.5V
74
103
MAX9920
4.5V ≤ VCC ≤ 5.5V
68
100
VRS+ = VRS- = -2V
Small-Signal -3dB Bandwidth
Slew Rate
ICC_SHDN
BW
SR
0.7
TA = -40°C to +125°C
TA = +25°C
1.0
75
MAX9919F, VSENSE = 50mV
250
MAX9919N, VSENSE = 50mV
120
MAX9920, VSENSE = 200mV
230
MAX9918
0.6
MAX9919F
0.9
MAX9919N
3.0
MAX9920
1.5
MAX9919F
1% Settling Time from VSENSE
Step
MAX9919N
MAX9920
VSENSE = 5mV to 50mV step
V
5
µA
5.5
V
dB
1.2
1.6
mA
2.2
0.5
MAX9918, VSENSE = 50mV
MAX9918
0.8
1.5
TA = -40°C to +125°C
VSHDN = VCC = 5V
µA
V
4.5
TA = +25°C
UNITS
dB
±100
ICC
Shutdown Supply Current
MAX
MAX9918, MAX9919_, VRS+ = VRS- = ±50mV
VRS+ = VRS- = +14V
Supply Current
TYP
0V ≤ VSHDN ≤ VCC
SHDN Logic-Input Current
Power-Supply Rejection Ratio
(Note 3)
MIN
MAX9918, MAX9919_
REFINCMRR
IREFIN
Supply Voltage Range
CONDITIONS
10
µA
kHz
V/µs
12
VSENSE = 50mV to 5mV step
7
VSENSE = 5mV to 50mV step
3.5
VSENSE = 50mV to 5mV step
2.5
VSENSE = 5mV to 50mV step
3.5
VSENSE = 50mV to 5mV step
3
VSENSE = 20mV to 200mV step
5
VSENSE = 200mV to 20mV step
3
µs
_______________________________________________________________________________________
5
MAX9918/MAX9919/MAX9920
ELECTRICAL CHARACTERISTICS (continued)
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
ELECTRICAL CHARACTERISTICS (continued)
(VCC = 5V, VRS+ = VRS- = +14V, VSENSE = (VRS+ - VRS-) = 0V, VSHDN = VGND = 0V, VREFIN = VCC/2, RL = 100kΩ; for MAX9918, AV =
90V/V, R2/R1 = 89kΩ/1kΩ; for MAX9920, AV = 20V/V, R2/R1 = 79kΩ/1kΩ; TA = -40°C to +125°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1
PARAMETER
SYMBOL
1% Settling Time from VCM Step
CONDITIONS
VCM = -2V to +14V step
2.5
VCM = +14V to -2V step
0.5
MAX9919F,
VSENSE = 50mV
VCM = -2V to +14V step
2.5
VCM = +14V to -2V step
0.5
VCM = -2V to +14V step
3.5
MAX9920,
VSENSE = 200mV
VCM = +14V to -2V step
3.5
VCM = -2V to +14V step
0.25
VCM = +14V to -2V step
2.5
MAX9918, VSENSE = 50mV, 1% settling
4.5
MAX9919F, VSENSE = 50mV, 1% settling
5
MAX9919N, VSENSE = 50mV, 1% settling
6
MAX9920, VSENSE = 200mV, 1% settling
Maximum Capacitive Load Stability
Input Referred Noise Voltage
Density
No sustained oscillations (Note 5)
en
TYP
MAX9918,
VSENSE = 50mV
MAX9919N,
VSENSE = 50mV
Power-Up Time
MIN
10kHz
MAX
µs
µs
5
50
pF
MAX9918, MAX9919_
60
MAX9920
174
Note 1: All devices are 100% production tested at TA = +25°C. All temperature limits are guaranteed by design.
Note 2: VOS is extrapolated from two point gain error tests. Measurements are made at VSENSE = 5mV and 50mV for
MAX9918/MAX9919N/MAX9919F, and VSENSE = 20mV and 200mV for MAX9920.
Note 3: Extrapolated VOS as described above in Note 2 is used to calculate VOS drift, CMRR, and PSRR.
Note 4: OUT should be 100mV away from either rail to achieve rated accuracy, or limited by a VSENSE of 50mV for the
MAX9918/MAX9919N/MAX9919F and 200mV for the MAX9920.
Note 5: Not production tested. Guaranteed by design.
6
UNITS
_______________________________________________________________________________________
nV/√Hz
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
0.40
0.25
0.35
0.30
0.25
N (%)
0.25
N (%)
0.20
0.30
0.15
0.20
0.15
0.20
0.10
0.15
0.10
0.10
0.05
0.05
0.05
0
0
0
-4
80 160 240 320 400
-3
-2
-1
0
1
2
3
4
-400 -320 -240-160 -80 0
OFFSET VOLTAGE (FV/°C)
OFFSET VOLTAGE (FV)
VOS DRIFT
(VRS+ = -2V)
VOS vs. VCC
VOS vs. VCM
0.40
0.35
400
TA = -40°C
300
TA = +25°C
125
100
75
200
0.25
0.20
0
-100
0.15
-200
0.10
-300
0.05
-400
0
MAX9918ASA
VCC = 5V
VREF = GND
0
2
4
6
8
10
-20 -10 0
25
0
-25
TA = +125°C
-50
-75
-500
-10 -8 -6 -4 -2
VCM = 14V
50
100
VOS (FV)
VOS (uV)
0.30
MAX9918 toc06
500
MAX9918 toc04
0.45
80 160 240 320 400
OFFSET VOLTAGE (FV)
MAX9918 toc05
-400 -320 -240-160 -80 0
-100
10 20 30 40 50 60 70 80
MAX9918ASA
VCC = 5V
VREF = GND
VCM = -2V
OFFSET VOLTAGE (FV/°C)
VCM (V)
4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5
VCC (V)
GAIN ERROR
(VRS+ = +14V, MAX9919F, AV = +45V/V)
GAIN ERROR
(VRS+ = +14V, MAX9919N, AV = +90V/V)
GAIN ERROR
(VRS+ = -2V, MAX9919F, AV = +45V/V)
0.5
0.6
0.7
MAX9918 toc09
0.8
MAX9918 toc07
0.6
MAX9918 toc08
N (%)
MAX9918 toc03
0.45
0.35
MAX9918 toc02
0.30
MAX9918 toc01
0.50
N (%)
VOS
(VRS+ = -2V)
VOS DRIFT
(VRS+ = +14V)
VOS
(VRS+ = +14V)
0.5
0.6
0.4
0.3
N (%)
0.5
N (%)
N (%)
0.4
0.4
0.3
0.2
0.3
0.2
0.2
0.1
0
0.1
0.1
-0.4 -0.3 -0.2 -0.1 0
0.1 0.2 0.3
GAIN ERROR (%)
0
0.4
-0.4 -0.3 -0.2 -0.1 0
0.1 0.2 0.3
GAIN ERROR (%)
0.4
0
-0.4 -0.3 -0.2 -0.1 0
0.1 0.2
GAIN ERROR (%)
0.3
_______________________________________________________________________________________
0.4
7
MAX9918/MAX9919/MAX9920
Typical Operating Characteristics
(VCC = 5V, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 5V, TA = +25°C, unless otherwise noted.)
GAIN ERROR
(VRS+ = -2V, MAX9919N, AV = +90V/V)
GAIN ERROR vs. VCM
0.5
1.6
1.2
GE (%)
N (%)
TA = +125NC
0.8
0.4
0.3
MAX9918 toc11
2.0
MAX9918 toc10
0.6
TA = +25NC
0.4
0
-0.4
0.2
-0.8
-1.2
0.1
-1.6
-2.0
-0.4 -0.3 -0.2 -0.1 0
0.1 0.2
GAIN ERROR (%)
0.3
0.4
-20 -10 0
GAIN ERROR vs. VCC
0.15
LINEARITY (%)
0.2
0.20
VCM = -2V
0
TA = -40°C
0.10
0.05
0
-0.05
-0.1
TA = +125°C
-0.10
-0.2
-0.20
-0.5
-0.25
4.7
4.9
5.1
VCC (V)
5.3
-30
5.5
-20
0.04
TA = +25°C TA = -40°C
0.02
0
-0.02
TA = +25°C
0.04
0
10
VSENSE (mV)
20
30
VCM = -2V
VCC = 5V
VREFIN = GND
TA = -40°C AV = 90V/V
UNIDIRECTIONAL
0.02
0
TA = +125°C
-0.04
-0.06
-0.06
-0.08
-0.08
-0.10
-0.10
-30
-20
-10
0
VSENSE (mV)
8
0.06
-0.02
TA = +125°C
-0.04
0.08
LINEARITY (%)
0.06
VCM = +14V
VCC = 5V
VREFIN = VCC/2
AV = 90V/V
BIDIRECTIONAL
0.10
MAX9918 toc14
0.08
-10
LINEARITY vs. VSENSE
LINEARITY vs. VSENSE
0.10
TA = +25°C
-0.15
VCM = 14V
-0.4
4.5
VCM = -2V
VCC = 5V
VREFIN = VCC/2
AV = 90V/V
BIDIRECTIONAL
MAX9918 toc13
0.3
GAIN ERROR (%)
0.25
MAX9918 toc12
0.4
-0.3
10 20 30 40 50 60 70 80
VCM (V)
LINEARITY vs. VSENSE
0.5
0.1
TA = -40NC
MAX9918ASA
VCC = 5V
VREF = GND
MAX9918 toc15
0
LINEARITY (%)
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
10
20
30
0
10
20
30 40 50
VSENSE (mV)
60
70
80
_______________________________________________________________________________________
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
LINEARITY vs. VSENSE
TA = -40°C
TA = +25°C
0.15
TA = +25°C
0.10
0.05
0
-0.05
TA = +125°C
-0.10
-0.20
-0.25
-100 -80 -60 -40 -20 0 20 40 60 80 100
VSENSE (mV)
0.02
0
-0.02
TA = +25°C
-0.04
-0.06
-0.08
-0.10
-100 -80 -60 -40 -20 0 20 40 60 80 100
VSENSE (mV)
-2V VCM: SOLID LINE
14V VCM: DASHED LINE
MAX9918, VREFIN = 0V
UNIDIRECTIONAL,
GAIN = 90V/V
-20 -10 0
10 20 30 40 50 60 70 80
VSENSE (mV)
VOH/VOL vs. IOH
VOUT - VREFIN vs. VSENSE
350
MAX9918 toc20
-2V VCM: SOLID LINE
14V VCM: DASHED LINE
20
30
250
VCC - VOH
200
150
100
MAX9918, VREFIN = VCC/2
BIDIRECTIONAL,
GAIN = 90V/V
10
-40 -30 -20 -10 0
VSENSE (mV)
VCM = +14V
300
VOH AND VOL (mV)
3
3
2
2
1
1
0
-1
-1
-2
-2
-3
-3
MAX9918 toc21
0.04
VOUT - VREFIN (V)
TA = -40°C
TA = +125°C
0.06
VCM = +14V
VCC = 5V
VREFIN = VCC/2
AV = 30V/V
BIDIRECTIONAL
MAX9918 toc18
0.08
6
6
5
5
4
4
3
3
2
2
1
1
0
-1
-1
MAX9918 toc19
VOUT - VREFIN vs. VSENSE
LINEARITY vs. VSENSE
0.10
LINEARITY (%)
TA = -40°C
-0.15
TA = +125°C
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
VSENSE (mV)
VOUT - VREFIN (V)
VCM = -2V
VCC = 5V
VREFIN = VCC/2
AV = 30V/V
BIDIRECTIONAL
0.20
LINEARITY (%)
LINEARITY (%)
VCM = +14V
VCC = 5V
VREFIN = GND
AV = 90V/V
UNIDIRECTIONAL
MAX9918 toc17
LINEARITY vs. VSENSE
0.25
MAX9918 toc16
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0
-0.02
-0.04
-0.06
-0.08
-0.10
VOL
50
40
0
0
1
2
3
4 5 6
IOH (mA)
7
8
9
10
_______________________________________________________________________________________
9
MAX9918/MAX9919/MAX9920
Typical Operating Characteristics (continued)
(VCC = 5V, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 5V, TA = +25°C, unless otherwise noted.)
ICC vs. VCC
ICC (mA)
0.5
VCM = 14V
0.3
0.2
0
VSENSE = 0V
4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5
VCC (V)
TA = +25NC
-20 -10 0
20
MAX9918 toc26
GAIN (dB)
200
-20
100
-30
-20
0
-10
GAIN (dB)
0
-20
10
25
VCM (V)
40
55
VCM = -2V
-90
FREQUENCY (MHz)
10
-100
0.001
0.1
1
FREQUENCY (MHz)
10
0
-20
MAX9918
VCM = 14V
VSENSE = 50mV
-60
-80
-100
-80
1
0.01
-40
-70
MAX9920
VCM = 14V
GAIN = 20V/V
0.1
-40
0.001
70
-40
-50
MAX9918
VCM = 14V
GAIN = 90V/V
PSRR vs. FREQUENCY
MAX9918
VCM = 14V
GAIN = 90V/V
-60
-30
10
-5
GAIN vs. FREQUENCY
-10
0.01
0
-10
-30
-60
0.001
10
300
-20
-50
MAX9918 toc24
20
400
10
-40
40
30
500
10
10 20 30 40 50 60 70 80
VCM (V)
GAIN vs. FREQUENCY
600
0
80
MAX9918 toc28
30
-20 -10 0
50
700
GAIN vs. FREQUENCY
40
-100
10 20 30 40 50 60 70 80
VCM (V)
800
IN+ - IN- = 50mV
VCC = VSHDN = 0V
VREFIN = 0V
60
MAX9918
VCC = 5V
-80
900
DIFFERENTIAL RIN (I)
TA = +125NC
20
40
VCM (V)
-20
-60
1000
MAX9918 toc25
INPUT LEAKAGE CURRENT (FA)
TA = -40NC
0
0
DIFFERENTIAL RIN vs. VCM
TA = +25NC
-20
20
-40
INPUT LEAKAGE CURRENT vs. VCM
20
15
10
5
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
TA = -40NC
MAX9918 toc27
0.1
40
MAX9918 toc29
0.4
60
PSRR (dB)
ICC (mA)
0.6
80
MAX9918 toc30
VCM = -2V
VSENSE = 0V (DASH)
VSENSE + 50mV (SOLID
TA = +125NC
100
MAX9918 toc23
0.8
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
IBAIS (FA)
MAX9918 toc22
0.9
0.7
IBIAS vs. VCM
ICC vs.VCM
1.0
GAIN (dB)
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
-120
VCM = 14V
0.01
0.1
1
FREQUENCY (MHz)
10
100
-140
10 100
0.0001 0.001 0.01 0.1 1
FREQUENCY (kHz)
______________________________________________________________________________________
1k
10k
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
SMALL-SIGNAL TRANSIENT
(GAIN = 90V/V)
SMALL-SIGNAL TRANSIENT
(GAIN = 45V/V)
MAX9918 toc32
MAX9918 toc31
5mV/div
50mV/div
5mV/div
MAX9918, VCM = 14V
VSENSE = 10mV TO 15mV
100mV/div
10Fs/div
10Fs/div
LARGE-SIGNAL TRANSIENT
(GAIN = 45V/V)
LARGE-SIGNAL TRANSIENT
(GAIN = 90V/V)
MAX9918 toc33
50mV/div
500mV/div
MAX9918, VCM = 14V
VSENSE = 10mV TO 15mV
MAX9918 toc34
50mV/div
MAX9918, VCM = 14V
VSENSE = 0V TO 50mV
1V/div
MAX9918, VCM = 14V
VSENSE = 0 TO 50mV
10Fs/div
10Fs/div
OUTPUT RESPONSE TO
COMMON-MODE TRANSIENT
COMMON-MODE STEP RESPONSE
MAX9918 toc35
MAX9918 toc36
MAX9918, VCM = 14V
SSENSE = PS (50mV)
10V/div
1V/div
VCM
50V/div
0
OUTPUT AC-COUPLED
FULL SCALE
AT THE INPUT
10Fs/div
VOUT
100mV/div
4µs/div
______________________________________________________________________________________
11
MAX9918/MAX9919/MAX9920
Typical Operating Characteristics (continued)
(VCC = 5V, TA = +25°C, unless otherwise noted.)
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
Typical Operating Characteristics (continued)
(VCC = 5V, TA = +25°C, unless otherwise noted.)
POWER-UP TIME
SHUTDOWN ON/OFF DELAY
MAX9918 toc37
MAX9918 toc38
5V/div
5V/div
2V/div
1V/div
MAX9918, VCM = 14V
VSENSE = PS (50mV)
MAX9918, VCM = 14V
VSENSE = PS (50mV)
4Fs/div
4Fs/div
OUTPUT OVERDRIVE
RECOVERY (30V/V)
OUTPUT OVERDRIVE
RECOVERY (90V/V)
MAX9918 toc39
MAX9918 toc40
MAX9918, VCM = 14V
VSENSE = 2 x PS
200mV/div
50mV/div
2V/div
2V/div
4Fs/div
12
MAX9918, VCM = 14V
VSENSE = 2 x PS
4Fs/div
______________________________________________________________________________________
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
TOP VIEW
+
8 VCC
RS+ 1
RS- 2
SHDN
3
MAX9918
MAX9919
MAX9920
7 REFIN
6
EP*
GND 4
FB
5 OUT
8 SOIC-EP
*EXPOSED PAD. CONNECT EP TO SOLID GROUND FOR
PROPER THERMAL AND ELECTRICAL PERFORMANCE.
Pin Description
PIN
NAME
1
RS+
Positive Current-Sensing Input. Power side connects to external sense resistor.
FUNCTION
2
RS-
Negative Current-Sensing Input. Load side connects to external sense resistor.
3
SHDN
Active-High Shutdown Input. Connect to GND for normal operation.
4
GND
Ground
5
OUT
Current-Sense Output. VOUT is proportional to VSENSE.
6
FB
7
REFIN
8
VCC
—
EP
Feedback Input. Connect FB to a resistive-divider network to set the gain for the MAX9918 and
MAX9920. See the Adjustable Gain (MAX9918/MAX9920) section for more information. Leave FB
unconnected for the MAX9919 for proper operation.
Reference Input. Set REFIN to VCC/2 for bidirectional operation. Set REFIN to GND for unidirectional
operation.
5V Supply Voltage Input. Bypass VCC to GND with 0.1µF capacitor.
Exposed Pad. Connect to a large-area contiguous ground plane for improved power dissipation. Do
not use as the only ground connection for the part.
Detailed Description
The MAX9918/MAX9919/MAX9920 are single-supply,
high-accuracy uni-/bidirectional current-sense amplifiers
with a high common-mode input range that extends from
-20V to +75V. The MAX9918/MAX9919/MAX9920’s input
stage utilizes a pair of level shifters allowing a wide
common-mode operating range when measuring the
voltage drop (VSENSE) across the current-sense resistor.
The first level shifter accommodates the upper commonmode operating range from +2V to +75V. When the
common-mode voltage falls below +2V, the second level
shifter is used to accommodate negative voltages down
to -20V.
The level shifters translate VSENSE to an internal reference voltage where it is then amplified with an instrumentation amplifier. The instrumentation amplifier
configuration provides high precision with input offset
voltages of 400µV (max). Indirect feedback of the
instrumentation amplifier allows the gain to be adjusted
with an external resistive-divider network on the
MAX9918/MAX9920. The MAX9919 is a fixed gain
device available with laser-trimmed resistors for gains
of 45V/V (MAX9919F) and 90V/V (MAX9919N).
The MAX9918/MAX9919 operate with a full-scale sense
voltage of 50mV. The input stage of the MAX9920 provides an attenuation factor of 4, enabling a full-scale
sense voltage of 200mV.
______________________________________________________________________________________
13
MAX9918/MAX9919/MAX9920
Pin Configuration
MAX9918/MAX9919/MAX9920
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
Uni-/Bidirectional Operation
The MAX9918/MAX9919 operate in bidirectional mode
by application of a low-source impedance reference
voltage in the 0V to VCC - 1.9V range, (typically VCC/2),
to REFIN. For the MAX9920, the reference voltage range
is 0V to VCC - 2.4V (typically VCC/2). The output voltage
V OUT relative to V REFIN is then proportional to the
±VSENSE voltage drop from RS+ to RS- (Figure 2).
The MAX9918/MAX9919/MAX9920 support both unidirectional and bidirectional operation. The devices operate in unidirectional mode with V REFIN = GND. The
output is then referenced to ground and the output voltage VOUT is proportional to the positive voltage drop
(VSENSE) from RS+ to RS- (Figure 1).
VOUT
G = 90V/V
3.6V
IDISCHARGE
RSENSE
2.7V
RS+
RS-
LOAD
MAX9919N
5V
TO ADC
OUT
SHDN
DISCHARGE
CURRENT
1.8V
VCC
REFIN
0.9V
GND
0
10mV
20mV
20mV
30mV
VSENSE
Figure 1. Unidirectional Operation
VOUT - VREFIN
G = 90V/V
1.8V
IDISCHARGE
ICHARGE
RSENSE
DISCHARGE
CURRENT
0.9V
RS+
RS-
LOAD
MAX9919N
5V
VCC
OUT
SHDN
REFIN
TO ADC
2.5V
-20mV
CHARGE
CURRENT
-10mV
0
10mV
20mV
-0.9V
GND
-1.8V
Figure 2. Bidirectional Operation
14
______________________________________________________________________________________
VSENSE
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
Adjustable Gain (MAX9918/MAX9920)
The MAX9918/MAX9920 feature externally adjustable
gain set by a resistive-divider network circuit using
resistors R1 and R2 (see the Functional Diagram). The
gain frequency compensation is set for a minimum gain
of 30V/V for the MAX9918 and 7.5V/V for the MAX9920.
The gain G for the MAX9918/MAX9920 is given by the
following equation:
⎛ R2 ⎞
G = ⎜1+
⎟ (for MAX9918)
⎝
R1 ⎠
and
Sense Resistor, RSENSE
Choose RSENSE based on the following criteria:
Accuracy: A high RSENSE value allows lower currents
to be measured more accurately. This is because offsets become less significant when the sense voltage is
larger. In the linear region (100mV < V OUT < V CC
- 100mV), there are two components to accuracy: input
offset voltage (VOS) and gain error (GE). Use the linear
equation to calculate total error:
VOUT = (G ± GE) x (VSENSE ± VOS)
For best performance, select R SENSE to provide
approximately 50mV (MAX9918/MAX9919) or 200mV
(MAX9920) of sense voltage for the full-scale current in
each application. Sense resistors of 5mΩ to 100mΩ are
available with 1% accuracy or better.
Efficiency and Power Dissipation
⎛ ⎛ R2 ⎞ ⎞
⎜ ⎜⎝ 1 + R1 ⎟⎠ ⎟
G= ⎜
⎟ (for MAX9920)
4
⎜
⎟
⎜⎝
⎟⎠
Applications Information
Component Selection
Ideally, the maximum load current develops the fullscale sense voltage across the current-sense resistor.
Choose the gain needed to yield the maximum output
voltage required for the application:
VOUT = VSENSE x G
where VSENSE is the full-scale sense voltage, 50mV for
the MAX9918/MAX9919, or 200mV for the MAX9920
and G is the gain of the device. G is externally
adjustable for the MAX9918/MAX9920. The MAX9919
has a fixed gain version of 45V/V (MAX9919F) or 90V/V
(MAX9919N).
In unidirectional applications (VREFIN = 0V), select the
gain of the MAX9918/MAX9920 to utilize the full output
range between GND and VCC. In bidirectional applications (VREFIN = VCC/2), select the gain to allow an output
voltage range of ±VCC/2. VOUT must be at least 100mV
from either rail to achieve the rated gain accuracy.
At high current levels, the I2R losses in RSENSE can be
significant. Take this into consideration when choosing
the resistor value and its power dissipation (wattage)
rating. Also, the sense resistor’s value might drift if it is
allowed to heat up excessively. The precision VOS of
the MAX9918/MAX9919/MAX9920 allows the use of
small sense resistors to reduce power dissipation and
reduce hot spots.
Inductance: Keep inductance low if ISENSE has a large
high-frequency component by using resistors with low
inductance value.
Power-Supply Bypassing and Grounding
Bypass the MAX9918/MAX9919/MAX9920’s V CC to
ground with a 0.1µF capacitor. Grounding these
devices requires no special precautions; follow the
same cautionary steps that apply to the rest of the system. High-current systems can experience large voltage drops across a ground plane, and this drop may
add to or subtract from VOUT. Using a differential measurement between VOUT and REFIN prevents this problem. For highest current-measurement accuracy, use a
single-point star ground. Connect the exposed pad to a
solid ground to ensure optimal thermal performance.
______________________________________________________________________________________
15
MAX9918/MAX9919/MAX9920
Shutdown Mode
Drive SHDN high to enter low-power shutdown mode.
In shutdown mode, the MAX9918/MAX9919/MAX9920
draw 0.5µA (typ) of quiescent current.
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
MAX9918/MAX9919/MAX9920
Functional Diagram
VCC
MAX9919F
OUT
A
R2
FB
RS+
50mV (typ)
RSENSE
RS-
INPUT
INPUT STAGE/
LEVEL SHIFTER
R1
REFIN
ILOAD
FIXED GAIN
G = 45V/V OR 90V/V
SHDN
GND
VCC
MAX9918
MAX9920
A
OUT
R2
MAX9918
50mV (typ)
MAX9920
200mV (typ)
FB
RS+
RSENSE
RS-
INPUT
INPUT STAGE/
LEVEL SHIFTER
R1
REFIN
ILOAD
ADJUSTABLE GAIN
SHDN
GND
GAIN IS SET BY EXTERNAL RESISTORS, R1 AND R2
G = [1+(R2/R1)] FOR MAX9918
G = [1+(R2/R1)]/4 FOR MAX9920
Chip Information
PROCESS: BiCMOS
16
______________________________________________________________________________________
-20V to +75V Input Range, Precision
Uni-/Bidirectional, Current-Sense Amplifiers
PACKAGE CODE
DOCUMENT NO.
8 SOIC-EP
S8E+14
21-0111
8L, SOIC EXP. PAD.EPS
PACKAGE TYPE
PACKAGE OUTLINE
8L SOIC, .150" EXPOSED PAD
21-0111
C
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 17
© 2009 Maxim Integrated Products
Maaxim is a registered trademark of Maxim Integrated Products, Inc.
MAX9918/MAX9919/MAX9920
Package Information
For the latest package outline information and land patterns, go to www.maxim-ic.com/packages.