E-Series I/Q Demodulator 10 MHz EKIN-10D V3.00 Features ● ● ● SM-28 Excellent Phase and Amplitude Balance LO Power: +10 dBm Typical Surface Mount Specifications @ 25°C Frequency Range LO / RF I/Q 10 MHz DC - 0.5 MHz Amplitude Unbalance Maximum 0.5 dB Phase Unbalance Maximum 1° Isolation LO to RF Minimum 50 dB Conversion Loss Maximum 10 dB (LO) Carrier Power +10 ±2 dBm Q = I -90° for RF > LO Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Operating Characteristics Operating Temp. -10°C to +70°C Storage Temp. -40°C to +85°C Impedance 50 Ohms Nominal RF Power (1dB Compression) 3 dBm Maximum DC Offset Voltage 1 mV Typical Pin Configuration Ordering Information Part No. EKIN-10D EKIN-10DTR Packaging Tube Forward Tape & Reel Function Pin No. LO 1 RF 8 I 5 Q 6 Case Ground 2,3,4,7 S0611 C Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020