Confidential ICE-2000 USER GUIDE ICE-2000 USER GUIDE(Ver 1.0) Package LIST: 1. ICE board *1 2. DC +5V/2A power supply *1 3. Extent printer cable *1 4. User Guide *1 (Notice: Please download the ELAN IDE TOOL at ELAN Website. WWW.EMC.COM.TW ) Personal Computer setup: 1.Set Printer Port at EPP mode(Enhanced Parallel Port mode) And set Parallel port address at 378h or 278h (3BCh is not available). Ex: Take an example on AWARD BIOS setup: Main menu / Chipset Feature Setup / Parallel Port Mode / EPP 2.The default Parallel Port is 378h. If your computer is not 378h, please change to other address at ELAN IDE tool / Option / Connect / Connect Port Hardware setup: Jack: J1: DC 5V/ 2A Power supply (Inner:5V, Outer :GND) Switch: SW: Power on/off switch(at ICE board ). Connector: IR1 & IR2: Interface between ICE & PM board. _______________________________________________________________________________________________________ JAN. 10,2001