Part Number: www.SunLED.com ZMDKBBA57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Features z 3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z INNER LENS TYPE z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. z ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK (InGaA lP) BBA (InGaN) Unit MDK (InGaA lP) BBA (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.95 3.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.0 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 650 468 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 635 470 nm Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width iFS 185 100 mA Power Dissipation PT 75 120 mW - 1000 V Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 21 nm °C Capacitance (Typ.) (VF=0V, f=1MHz) C 35 100 pF Electrostatic Discharge Threshold (HBM) Operating Temperature Storage Temperature Part Number ZMDKBBA57W-1 TA -40 ~ +85 Tstg -40 ~ +85 Emitting Color Emitting Material Red InGaAlP Blue InGaN Published Date : FEB 25 , 2008 Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA6267 Wavelength nm λP min. typ. 110 297 650 70 148 468 V1 Checked : B.L.LIU Viewing Angle 2 θ 1/2 100° P.1/5 Part Number: www.SunLED.com ZMDKBBA57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP MDK Published Date : FEB 25 , 2008 Drawing No : SDSA6267 V1 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com ZMDKBBA57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP BBA Published Date : FEB 25 , 2008 Drawing No : SDSA6267 V1 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com ZMDKBBA57W-1 3.0x2.5mm SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25 , 2008 Drawing No : SDSA6267 V1 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com 3.0x2.5mm SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 25 , 2008 ZMDKBBA57W-1 Drawing No : SDSA6267 ZMDKBBA57W-1 V1 Checked : B.L.LIU P.5/5