IRF HFA16TA60CPBF

PD-95739
HFA16TA60CPbF
HEXFRED
Ultrafast, Soft Recovery Diode
TM
Features
•
•
•
•
•
•
2
Ultrafast Recovery
Ultrasoft Recovery
Very Low IRRM
Very Low Qrr
Specified at Operating Conditions
Lead-Free
Benefits
• Reduced RFI and EMI
• Reduced Power Loss in Diode and Switching
Transistor
• Higher Frequency Operation
• Reduced Snubbing
• Reduced Parts Count
VR = 600V
VF(typ.)* = 1.7V
Qrr *= 65nC
di(rec)M/dt * = 240A/µs
1
* 125°C
3
Description
International Rectifier's HFA16TA60C is a state of the art center tap ultra fast
recovery diode. Employing the latest in epitaxial construction and advanced
processing techniques it features a superb combination of characteristics
which result in performance which is unsurpassed by any rectifier previously
available. With basic ratings of 600 volts and 15 amps per Leg continuous
current, the HFA16TA60C is especially well suited for use as the companion
diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the
HEXFRED product line features extremely low values of peak recovery current
(IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of
recovery. The HEXFRED features combine to offer designers a rectifier with
lower noise and significantly lower switching losses in both the diode and the
switching transistor. These HEXFRED advantages can help to significantly
reduce snubbing, component count and heatsink sizes. The HEXFRED
HFA16TA60C is ideally suited for applications in power supplies and power
conversion systems (such as inverters), motor drives, and many other similar
applications where high speed, high efficiency is needed.
TO-220AB
Absolute Maximum Ratings (per Leg)
Parameter
VR
IF @ TC = 100°C
IFSM
IFRM
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
www.irf.com
Cathode-to-Anode Voltage
Continuous Forward Current
Single Pulse Forward Current
Maximum Repetitive Forward Current
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Max
Units
600
8.0
60
24
36
14
V
-55 to +150
A
C
W
1
10/19/04
HFA16TA60CPbF
Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)
Parameter
Min Typ Max Units
VBR
Cathode Anode Breakdown Voltage
600
V
VFM
Max Forward Voltage
IRM
Max Reverse Leakage Current
CT
Junction Capacitance
1.4
1.7
1.4
0.3
100
10
LS
Series Inductance
8.0
1.7
2.1
1.7
5
500
25
V
µA
pF
nH
Test Conditions
IR = 100µA
IF = 8A
See Fig. 1
IF = 16A
IF = 8A, T J = 125°C
VR = V R Rated
See Fig. 2
TJ = 125°C, VR = 0.8 x VR RatedD Rated
See Fig. 3
VR = 200V
Measured lead to lead 5mm from
package body
Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified)
Parameter
t rr
trr1
trr2
IRRM1
IRRM2
Qrr1
Qrr2
di(rec)M /dt1
di(rec)M /dt2
Reverse Recovery Time
See Fig. 5, 10
Peak Recovery Current
See Fig. 6
Reverse Recovery Charge
See Fig. 7
Peak Rate of Fall of Recovery Current
During tb
See Fig. 8
Min Typ Max Units
18
37
55
3.5
4.5
65
124
240
210
55
90
5.0
8
138
360
Test Conditions
IF = 1.0A, dif/dt = 200A/µs, V R = 30V
ns TJ = 25°C
TJ = 125°C
IF = 8A
TJ = 25°C
A
TJ = 125°C
VR = 200V
TJ = 25°C
nC
TJ = 125°C
dif/dt = 200A/µs
TJ = 25°C
A/µs
TJ = 125°C
Thermal - Mechanical Characteristics (per Leg)
Parameter
Tlead
RthJA‚
RthCSƒ
Lead Temperature
Junction-to-Case, Single Leg Conducting
Junction-to-Case, Both Legs Conducting
Thermal Resistance, Junction to Ambient
Thermal Resistance, Case to Heat Sink
Wt
Weight
RthJC
Mounting Torque

‚
ƒ
2
Min
Typ
Max
Units
300
3.5
1.75
80
°C
0.5
2.0
0.07
6.0
5.0
12
10
K/W
g
(oz)
Kg-cm
lbf•in
0.063 in. from Case (1.6mm) for 10 sec
Typical Socket Mount
Mounting Surface, Flat, Smooth and Greased
www.irf.com
HFA16TA60CPbF
1000
TJ = 150°C
Reverse Current - IR (µA)
TJ = 150°C
10
100
TJ = 125°C
10
1
0.1
TJ = 25°C
0.01
T = 125°C
J
0.001
T = 25°C
0
J
100
200
300
400
500
600
Reverse Voltage - V R(V)
Fig. 2 - Typical Reverse Current vs. Reverse
Voltage, (per Leg)
1
100
A
0.1
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
Forward Voltage Drop - V FM(V)
Fig. 1 - Maximum Forward Voltage Drop
vs. Instantaneous Forward Current,
(per Leg)
Junction Capacitance -CT (pF)
Instantaneous Forward Current - IF (A)
100
A
TJ = 25°C
10
1
1
10
100
1000
Reverse Voltage
Voltage - -VV
V(V)
)
R (R
Reverse
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage, (per Leg)
Thermal Response (Z thJC )
10
D = 0.50
1
0.20
0.10
0.05
0.1
0.01
0.00001
0.02
0.01
PDM
SINGLE PULSE
(THERMAL RESPONSE)
t1
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak TJ = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
www.irf.com
Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg)
3
HFA16TA60CPbF
80
20
VR = 200V
TJ = 125°C
TJ = 25°C
I F = 16A
IF
F = 8.0A
I F = 4.0A
16
I F = 16A
60
I F = 4.0A
Irr- ( A)
trr- (nC)
I F = 8.0A
40
12
8
20
4
VR = 200V
TJ = 125°C
TJ = 25°C
0
100
di f /dt - (A/µs)
0
100
1000
1000
di f /dt - (A/µs)
Fig. 6 - Typical Recovery Current vs. dif/dt,
(per Leg)
Fig. 5 - Typical Reverse Recovery vs. dif/dt,
(per Leg)
10000
500
VR = 200V
TJ = 125°C
TJ = 25°C
VR = 200V
TJ = 125°C
TJ = 25°C
400
IF = 16A
di (rec) M/dt- (A /µs)
IF = 8.0A
Qrr- (nC)
IF = 4.0A
300
200
IF = 16A
I F = 8.0A
IF = 4.0A
1000
100
0
100
di f /dt - (A/µs)
Fig. 7 - Typical Stored Charge vs. dif/dt,
(per Leg)
4
1000
100
100
di f /dt - (A/µs)
Fig. 8 - Typical di(rec)M/dt vs. dif/dt,
(per Leg)
1000
www.irf.com
HFA16TA60CPbF
3
t rr
IF
REVERSE RECOVERY CIRCUIT
tb
ta
0
Q rr
VR = 200V
2
I RRM
4
0.5 I RRM
di(rec)M/dt
0.01 Ω
0.75 I RRM
L = 70µH
D.U.T.
dif/dt
ADJUST
D
G
IRFP250
S
Fig. 9 - Reverse Recovery Parameter Test
Circuit
www.irf.com
5
1
di f /dt
1. dif/dt - Rate of change of current
through zero crossing
2. I RRM - Peak reverse recovery current
3. trr - Reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current
4. Qrr - Area under curve defined by trr
and I RRM
trr X IRRM
Q rr =
2
5. di(rec)M/dt - Peak rate of change of
current during t b portion of trr
Fig. 10 - Reverse Recovery Waveform and
Definitions
5
HFA16TA60CPbF
TO-220AB Package Outline
Dimensions are shown in millimeters (inches)
TO-220AB Part Marking Information
PART NUMBER
E XAMPLE : T HIS IS A HFA16T A60C
LOT CODE 1789
ASSE MBLED ON WW 19, 2001
IN T HE ASSEMBLY LINE "C"
INT ERNAT IONAL
RECT IFIER
LOGO
DAT E CODE
ASSEMBLY
LOT CODE
Note: "P" in the beginning of date
code indicates "Lead-F ree"
P = LEAD-FRE E
YE AR 1 = 2001
WEEK 19
LINE C
PART NUMBE R
EXAMPLE: T HIS IS A HFA16TA60C
LOT CODE 1789
ASSEMBLED ON WW 19, 2001
Note: "P" in as sembly line pos ition
indicates "Lead-Free"
INT ERNAT IONAL
RECT IFIER
LOGO
AS SEMBLY
LOT CODE
DAT E CODE
YEAR 1 = 2001
WE EK 19
P = LEAD-FREE
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information. 10/04
6
www.irf.com