PD - 95685A HFA30PA60CPbF HEXFRED Ultrafast, Soft Recovery Diode TM Features Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free Benefits VR = 600V VF(typ.)* = 1.2V 2 IF(AV) = 15A Qrr (typ.)= 80nC 1 3 Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count IRRM (typ.) = 4.0A trr(typ.) = 19ns di(rec)M/dt (typ.)* = 160A/µs Description International Rectifier's HFA30PA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 15 amps per Leg continuous current, the HFA30PA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA30PA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-247AC Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG * 125°C www.irf.com Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. Units 600 15 150 60 74 29 V -55 to +150 A W C 1 10/18/04 HFA30PA60CPbF Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter Min. Typ. Max. Units VBR Cathode Anode Breakdown Voltage VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance 600 LS Series Inductance 1.3 1.7 1.5 2.0 1.2 1.6 1.0 10 400 1000 25 50 12 V V µA pF nH Test Conditions IR = 100µA IF = 15A See Fig. 1 IF = 30A IF = 15A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics (per Leg)@ TJ = 25°C (unless otherwise specified) Parameter t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 10 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current During tb See Fig. 8 Min. Typ. Max. Units 19 42 70 4.0 6.5 80 220 250 160 60 120 6.0 10 180 600 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C I F = 15A TJ = 25°C TJ = 125°C V R = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics (per Leg) Parameter Tlead RthJA RthCS Lead Temperature Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Wt Weight RthJC Mounting Torque Min. Typ. Max. Units 6.0 5.0 0.25 6.0 0.21 300 1.7 0.85 40 12 10 °C K/W g (oz) Kg-cm lbfin 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA30PA60CPbF Reverse Current - IR (µA) 10000 TJ = 150°C TJ = 125°C 10 TJ = 150°C 1000 100 TJ = 125°C 10 1 0.1 TJ = 25°C A 0.01 0 100 200 300 400 500 600 Reverse Voltage - V R (V) TJ = 25°C Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) 100 A 1 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 ForwardVoltage VoltageDrop Drop- -VVFM (V) Forward FM(V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 A TJ = 25°C A 10 0 100 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 P DM 0.05 0.1 0.02 0.01 0.01 0.00001 t1 SINGLE PULSE (THERMAL RESPONSE) t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x ZthJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics, (per Leg) www.irf.com 3 HFA30PA60CPbF 100 25 VR = 200V TJ = 125°C TJ = 25°C I F = 30A I F = 15A I F = 5.0A 80 20 I F = 30A I F = 15A 60 Irr- ( A) trr- (ns) I F = 5.0A 15 40 10 20 5 VR = 200V TJ = 125°C TJ = 25°C 0 100 A di f /dt - (A/µs) di f /dt - (A/µs) 10000 800 VR = 200V TJ = 125°C TJ = 25°C VR = 200V TJ = 125°C TJ = 25°C I F = 30A di (rec) M/dt- (A /µs) I F = 15A Qrr- (nC) 1000 Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg) Fig. 5 - Typical Reverse Recovery Time vs. dif/dt, (per Leg) 600 A 0 100 1000 IF = 5.0A 400 I F = 30A I F = 15A 1000 I F = 5.0A 200 0 100 A di f /dt - (A/µs) 1000 Fig. 7 - Typical Stored Charge vs. dif/dt, (per Leg) 4 100 100 A 1000 di f /dt - (A/µs) Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg) www.irf.com HFA30PA60CPbF 3 t rr IF 0 REVERSE RECOVERY CIRCUIT tb ta VR = 200V 2 Q rr I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω 0.75 I RRM L = 70µH 1 D.U.T. dif/dt ADJUST di f /dt 1. dif/dt - Rate of change of current through zero crossing D IRFP250 G 5 2. I RRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current S 4. Qrr - Area under curve defined by trr and I RRM trr X IRRM Q rr = 2 5. di(rec)M/dt - Peak rate of change of current during t b portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Fig. 9 - Reverse Recovery Parameter Test Circuit Ordering Information Table Device Code HF A 30 PA 60 C 1 2 3 4 5 6 1 - Hexfred Family 2 - Process Designator A = subs. elec. irrad. B = subs. Platinum 3 - Current Rating (30 = 30A) 4 - Package Outline (PA = TO-247, 3 pins) 5 - Voltage Rating (60 = 600V) 6 - Configuration (C = Center Tap Common Cathode) Note: PbF suffix at the end of the part number indicates Lead-Free www.irf.com 5 HFA30PA60CPbF TO-247AC Package Outline TO-247AC Part Marking Information E X AM P L E : T H I S IS A H F A 1 6 P A 6 0 C W IT H A S S E M B L Y L O T CO D E 5 65 7 AS S E M B L E D O N W W 35 , 2 000 I N A S S E M B L Y L I N E "H " I N T E R N A T IO N A L R E C T IF IE R L OGO P AR T N U M B E R H F A1 6 P A6 0 C P035H 56 AS S E M B L Y L OT COD E N o te : "P " in th e b e g i n n in g o f d ate co d e in d icate s "L e ad - F r e e " 57 D AT E CO D E P = L E AD -F R E E Y E AR 0 = 2 0 0 0 W E E K 35 L IN E H Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/04 6 www.irf.com