Bulletin PD-2.606 rev. B 05/01 HFA16PA60C HEXFRED Ultrafast, Soft Recovery Diode TM Features • • • • • Benefits • Reduced RFI and EMI • Reduced Power Loss in Diode and Switching Transistor • Higher Frequency Operation • Reduced Snubbing • Reduced Parts Count VR = 600V 2 Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions VF = 1.7V Qrr * = 65nC 1 di(rec)M/dt * = 240A/µs * 125°C 3 Description International Rectifier's HFA16PA60C is a state of the art center tap ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps per Leg continuous current, the HFA16PA60C is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA16PA60C is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. TO-247AC Absolute Maximum Ratings (per Leg) Parameter VR IF @ TC = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG www.irf.com Cathode-to-Anode Voltage Continuous Forward Current (per Leg) Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max Units 600 8 60 24 36 14 V -55 to +150 A W °C 1 HFA16PA60C Bulletin PD-2.606 rev. B 05/01 Electrical Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter Min. Typ. Max. Units V BR Cathode Anode Breakdown Voltage 600 V VFM Max Forward Voltage IRM Max Reverse Leakage Current CT Junction Capacitance 1.4 1.7 1.4 0.3 100 10 LS Series Inductance 8.0 1.7 2.1 1.7 5 500 25 V µA pF nH Test Conditions IR = 100µA IF = 8A See Fig. 1 IF = 16A IF = 8A, TJ = 125°C See Fig. 2 VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body Dynamic Recovery Characteristics (per Leg) @ TJ = 25°C (unless otherwise specified) Parameter t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Min Typ Max Units Reverse Recovery Time See Fig. 5, 6 & 16 Peak Recovery Current See Fig. 7& 8 Reverse Recovery Charge See Fig. 9 & 10 Peak Rate of Fall of Recovery Current During tb See Fig. 11 & 12 18 37 55 3.5 4.5 65 124 240 210 55 90 5.0 8.0 138 360 ns A nC A/µs Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V TJ = 25°C TJ = 125°C IF = 8A TJ = 25°C TJ = 125°C VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameter Tlead! RthJA" RthCS# Lead Temperature Junction-to-Case, Single Leg Conducting Junction-to-Case, Both Legs Conducting Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Wt Weight RthJC Mounting Torque Min Typ Max Units 300 3.5 1.75 40 °C 0.25 6 0.21 6 5 12 10 K/W g (oz) Kg-cm lbf•in ! 0.063 in. from Case (1.6mm) for 10 sec " Typical Socket Mount # Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA16PA60C Bulletin PD-2.606 rev. B 05/01 1000 Reverse Current - IR (µA) TJ = 150°C 10 TJ = 125°C T = 25°C TJ = 150°C 100 TJ = 125°C 10 1 0.1 TJ = 25°C 0.01 0.001 J 0 100 200 300 400 500 600 Reverse Voltage - V R(V) Fig. 2 - Typical Reverse Current vs. Reverse Voltage, (per Leg) 1 A 100 A 0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 Forward Voltage Drop - V FM(V) Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current, (per Leg) Junction Capacitance -CT (pF) Instantaneous Forward Current - IF (A) 100 TJ = 25°C 10 1 1 10 100 1000 Reverse Voltage Voltage - -VV V(V) ) R (R Reverse Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage, (per Leg) Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 0.1 0.01 0.00001 0.02 0.01 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Maximum Thermal Impedance Zthjc Characteristics, (per Leg) www.irf.com 3 HFA16PA60C Bulletin PD-2.606 rev. B 05/01 20 80 VR = 200V TJ = 125°C TJ = 25°C I F = 16A IFF = 8.0A I F = 4.0A 16 I F = 16A 60 I F = 8.0A Irr- ( A) trr- (nC) I F = 4.0A 40 12 8 20 4 VR = 200V TJ = 125°C TJ = 25°C 0 100 di f /dt - (A/µs) 0 100 1000 1000 Fig. 6 - Typical Recovery Current vs. dif/dt, (per Leg) Fig. 5 - Typical Reverse Recovery vs. dif/dt, (per Leg) 500 10000 VR = 200V TJ = 125°C TJ = 25°C 400 di f /dt - (A/µs) VR = 200V TJ = 125°C TJ = 25°C I F = 16A di (rec) M/dt- (A /µs) IF = 8.0A IF = 4.0A Qrr- (nC) 300 200 IF = 16A I F = 8.0A IF = 4.0A 1000 100 0 100 di f /dt - (A/µs) Fig. 7 - Typical Stored Charge vs. dif/dt, (per Leg) 4 1000 100 100 di f /dt - (A/µs) 1000 Fig. 8 - Typical di(rec)M/dt vs. dif/dt, (per Leg) www.irf.com HFA16PA60C Bulletin PD-2.606 rev. B 05/01 3 t rr IF 0 REVERSE RECOVERY CIRCUIT tb ta VR = 200V 2 Q rr I RRM 4 0.5 I RRM di(rec)M/dt 0.01 Ω L = 70µH 1 D.U.T. dif/dt ADJUST di f /dt 1. dif/dt - Rate of change of current through zero crossing D IRFP250 G 5 0.75 I RRM 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current S 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM Qrr = 2 5. di(rec)M/dt - Peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Fig. 9 - Reverse Recovery Parameter Test Circuit Ordering Information Table Device Code www.irf.com HF A 16 PA 60 C 1 2 3 4 5 6 1 - Hexfred Family 2 - Process Designator A = subs. elec. irrad. B = subs. Platinum 3 - Current Rating 4 - Package Outline (16 = 16A) (PA = TO-247, 3 pins) 5 - Voltage Rating (60 = 600V) 6 - Configuration (C = Center Tap Common Cathode) 5 HFA16PA60C Bulletin PD-2.606 rev. B 05/01 Outline Table 15 .90 (0 .626 ) 3. 65 (0 .14 4) 3. 55 (0 .13 9) DIA. 15 .30 (0 .602 ) 5. 30 (0 .20 9) 4.70 ( 0.185) 2.5 ( 0.098) 1.5 ( 0.059) 2 5. 70 (0 .22 5) 5.30 ( 0.208) 20 .30 (0 .800 ) 19 .70 (0 .775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 2 (2 PLCS.) 3 1 14. 80 ( 0.583) 14 .20 (0 .559 ) 3 4. 30 (0 .17 0) 3. 70 (0 .14 5) 2. 20 (0 .08 7) 1. 40 (0 .05 6) 1. 00 (0 .03 9) 2. 40 (0 .09 5) M AX. MAX. 0.80 ( 0.032) 0. 40 (0 .21 3) 10. 94 ( 0.430) 10 .86 (0 .427 ) Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and inches Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/01 6 www.irf.com