Oval Red LED Lamp (5 mm) OVLHRKD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLHRKD8 is designed for superior performance in outdoor environments. Its radiation pattern matches blue (OVLHBKD8), orange (OVLHQKD8) and green (OVLHGKD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable message signs x Indoor/outdoor advertising signage x Traffic and highway signs x Full-color video signs Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLHRKD8 AlInGaP Red 950 Red Diffused 1 ANODE RoHS 2 CATHODE Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 10/05 Page 1 of 3 Oval Red LED Lamp (5 mm) OVLHRKD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +95° C Reverse Voltage 5V Continuous Forward Current 2 50 mA Peak Forward Current (10% Duty Cycle, 1KHz) 200 mA Power Dissipation 130 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 260° C Electrostatic Discharge Classification (ESD) (MIL-STD-883E) Class 1 Notes: 1. Solder time less than 3 seconds at temperature extreme. 2. For long-term performance, the drive currents between 10 mA and 30 mA are recommended. Please contact an OPTEK sales representative for more information on recommended drive conditions. Electrical Characteristics TA = 25o C unless otherwise noted PARAMETER SYMBOL MIN TYP MAX UNITS CONDITIONS Iv Luminous Intensity 550 900 ---- mcd IF = 20 mA VF Forward Voltage ---- 2.1 2.6 V IF = 20 mA IR Reverse Current ---- ---- 100 µA VR = 5 V Dominant Wavelength 618 624 630 nm IF = 20 mA ---- 110 ---- deg IF = 20 mA ---- 50 ---- deg IF = 20 mA D 2 ½H-H 50% Power Angle 2 ½V-V Standard Bins (IF = 20mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLHRKD8 may be filled with any or all bins contained as below. 1100–1520 T 770–1100 S 550–770 R 618 Dominant Wavelength (nm) 630 Luminous intensity is at R bin or above. Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/05 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Oval Red LED Lamp (5 mm) OVLHRKD8 Typical Electro-Optical Characteristics Curves V 100.0 80.0 60.0 mA A 40.0 20.0 0.0 1.8 2.0 2.2 V 2.4 2.6 2.8 Forward Current vs Forward Voltage Reverse Current vs Reverse Voltage Half Power 500 100 400 75 300 % % WL = 23nm 50 200 25 100 0 400 0 0 20 40 60 80 100 500 600 mA 700 800 900 nm Relative Luminous Intensity vs Forward Current Relative Luminous Intensity vs Wavelength 50% Power Angle: H-H: 110° V-V: 50° H-H 100 mA V-V 100 80 80 60 60 40 40 % 20 20 0 0 20 40 60 88 100 -90 -60 -30 0 30 °C °C Maximum Forward DC Current vs Ambient Temperature Far Field Pattern 60 90 0 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 10/05 Page 3 of 3