PHILIPS BAP65LX

BAP65LX
Silicon PIN diode
Rev. 01 — 11 December 2007
Product data sheet
1. Product profile
1.1 General description
Planar PIN diode in a SOD882T leadless ultra small plastic SMD package.
1.2 Features
n
n
n
n
n
High voltage, current controlled
Low diode capacitance
Low diode forward resistance (low loss)
Very low series inductance
RF resistor for RF switches
1.3 Applications
n RF attenuators and switches
n Band switch for TV tuners
n Series diode for mobile communication transmit-receive switch
2. Pinning information
Table 1.
Pin
Discrete pinning
Description
1
cathode
2
anode
Simplified outline
1
2
Transparent
top view
[1]
Symbol
[1]
sym006
The marking bar indicates the cathode.
3. Ordering information
Table 2.
Ordering information
Type number Package
BAP65LX
Name
Description
Version
-
leadless ultra small plastic package; 2 terminals;
body 1 × 0.6 × 0.4 mm
SOD882T
BAP65LX
NXP Semiconductors
Silicon PIN diode
4. Marking
Table 3.
Marking
Type number
Marking code
BAP65LX
LF
5. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Min
Max
Unit
VR
reverse voltage
Conditions
-
30
V
IF
forward current
-
100
mA
Ptot
total power dissipation
-
135
mW
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−65
+150
°C
Typ
Unit
78
K/W
Tsp = 90 °C
6. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Rth(j-sp)
thermal resistance from junction
to solder point
Conditions
7. Characteristics
Table 6.
Characteristics
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VF
forward voltage
IF = 50 mA
-
0.9
1.1
V
IR
reverse current
VR = 20 V
-
-
20
nA
Cd
diode capacitance
see Figure 1; f = 1 MHz;
VR = 0 V
-
0.61
-
pF
VR = 1 V
-
0.48
0.85
pF
rD
diode forward resistance
VR = 3 V
-
0.43
0.7
pF
VR = 20 V
-
0.37
-
pF
IF = 1 mA
-
0.94
-
Ω
IF = 5 mA
-
0.58
0.95
Ω
IF = 10 mA
-
0.49
0.9
Ω
IF = 100 mA
-
0.35
-
Ω
see Figure 2; f = 100 MHz;
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
2 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
Table 6.
Characteristics …continued
Tamb = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
ISL
isolation
see Figure 3; VR = 0 V;
Lins
Lins
Lins
Lins
insertion loss
insertion loss
insertion loss
insertion loss
Min
Typ
Max
Unit
f = 900 MHz
-
10
-
dB
f = 1800 MHz
-
5.5
-
dB
f = 2450 MHz
-
3.9
-
dB
f = 900 MHz
-
0.09
-
dB
f = 1800 MHz
-
0.09
-
dB
f = 2450 MHz
-
0.10
-
dB
f = 900 MHz
-
0.06
-
dB
f = 1800 MHz
-
0.07
-
dB
f = 2450 MHz
-
0.08
-
dB
f = 900 MHz
-
0.06
-
dB
f = 1800 MHz
-
0.07
-
dB
f = 2450 MHz
-
0.08
-
dB
f = 900 MHz
-
0.05
-
dB
f = 1800 MHz
-
0.06
-
dB
f = 2450 MHz
-
0.07
-
dB
see Figure 4; IF = 1 mA;
see Figure 4; IF = 5 mA;
see Figure 4; IF = 10 mA;
see Figure 4; IF = 100 mA;
τL
charge carrier life time
when switched from IF = 10 mA to
IR = 6 mA; RL = 100 Ω; measured at
IR = 3 mA
-
0.18
-
µs
LS
series inductance
IF = 100 mA; f = 100 MHz
-
0.4
-
nH
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
3 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
001aah447
700
Cd
(fF)
600
001aah448
10
rD
(Ω)
500
400
1
300
200
100
0
0
5
10
15
20
10−1
10−1
1
102
10
VR (V)
IF (mA)
f = 1 MHz; Tj = 25 °C.
f = 100 MHz; Tj = 25 °C.
Fig 1. Diode capacitance as a function of reverse
voltage; typical values
Fig 2. Forward resistance as a function of forward
current; typical values
001aah449
0
ISL
(dB)
001aah450
0
Lins
(dB)
−10
−0.1
(1)
(2)
(3)
(4)
−20
−0.2
−30
−0.3
−40
0
1000
2000
3000
0
f (MHz)
1000
2000
3000
f (MHz)
Tamb = 25 °C
Tamb = 25 °C
Diode zero biased and inserted in series with a 50 Ω
stripline circuit
(1) IF = 100 mA
(2) IF = 10 mA
(3) IF = 5 mA
(4) IF = 1 mA
Diode inserted in series with a 50 Ω stripline circuit
and biased via the analyzer Tee network
Fig 3. Isolation of the diode as a function of
frequency; typical values
Fig 4. Insertion loss of the diode as a function of
frequency; typical values
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
4 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
8. Package outline
Leadless ultra small plastic package; 2 terminals; body 1 x 0.6 x 0.4 mm
SOD882T
(2×)
L1 (2×)
w
1
2
M
A
b (2×)
(2×)
w
M
B
e1
A
A1
y
A
E
D
(1)
B
0
UNIT
A
mm
0.40
0.36
0.04
1 mm
scale
DIMENSIONS (mm are the original dimensions)
A1
max
0.5
b
D
E
e1
L1
w
y
0.55
0.45
0.65
0.55
1.05
0.95
0.65
0.30
0.22
0.1
0.03
Note
1. The marking bar indicates the cathode
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
04-12-14
06-04-12
SOD882T
Fig 5. Package outline SOD882T
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
5 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
9. Abbreviations
Table 7.
Abbreviations
Acronym
Description
PIN
P-type, Intrinsic, N-type
SMD
Surface Mounted Device
RF
Radio Frequency
10. Revision history
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAP65LX_1
20071211
Product data sheet
-
-
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
6 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For additional information, please visit: http://www.nxp.com
For sales office addresses, send an email to: [email protected]
BAP65LX_1
Product data sheet
© NXP B.V. 2007. All rights reserved.
Rev. 01 — 11 December 2007
7 of 8
BAP65LX
NXP Semiconductors
Silicon PIN diode
13. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . .
General description. . . . . . . . . . . . . . . . . . . . . .
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pinning information . . . . . . . . . . . . . . . . . . . . . .
Ordering information . . . . . . . . . . . . . . . . . . . . .
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal characteristics. . . . . . . . . . . . . . . . . . .
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . .
Package outline . . . . . . . . . . . . . . . . . . . . . . . . .
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision history . . . . . . . . . . . . . . . . . . . . . . . . .
Legal information. . . . . . . . . . . . . . . . . . . . . . . .
Data sheet status . . . . . . . . . . . . . . . . . . . . . . .
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact information. . . . . . . . . . . . . . . . . . . . . .
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1
1
1
1
1
2
2
2
2
5
6
6
7
7
7
7
7
7
8
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2007.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 11 December 2007
Document identifier: BAP65LX_1