CCM01 MK III EMVTM compatible CCM01 MK III connectors are intended for applications such as pay TV, home shopping and utility meters. Mainly driven by the Set Top Box market for payment and/or deciphering. Construction Insulator Contacts Contact Finish PC tail plating Thermoplastic UL94V-0 rated Copper alloy Gold over nickel Tin lead (2µ min.) Mechanical Data Features • Available in standard or reverse card reading version, with direct PCB soldering for reduced installation cost. • Panel mount version comes with improved noise reduction FPC, to accommodate all front panel configurations. • Double sided version allows the customer to insert the card chip up or down for easier handling. • Self cleaning card detection switch (normally closed) is protected against assembly mishandling. • Available with 8 through hole contacts specifically designed to reduce card wear. • A chamfer opening to the card entry slot improves the card guidance into the connector. • Variable distance from lower card side to PCB to level card slot with your front panel design • Easy insertion into PCB provided by four half pegs and termination true positioning insulator.1 • Four snap in board locks to lower stress on soldered terminals and improve interconnect PCB retention. • Thermoplastic UL 94 V-0 insulator suitable for wave soldering only • Designed to be compatible with: NDS EMVCo 1 Termination true positioning insulator not designed on low profile version 3,9 mm Mechanical life Card insertion force Card extraction force Contact force Vibration 30,000 cycles min 10 N max 1 N min /10 N max 0.20 N min / 0.60 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Shock Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally closed 100mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Operating temperature Soldering temperature Damp heat Salt mist -20°C to +70°C Wave: 260°C / 5 seconds IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Ordering Code Designation Distance from lower card entrance & PCB 3,90 mm 6,75 mm 6,50 mm 8,00 mm Panel Mount Double Decker Standard Version Reverse Version CCM01-6101 CCM01-6201 CCM01-6202 CCM01-6105 CCM01-6103 CCM01-6301 CCM01-6402 CCM01-6302 CCM01-6403 Packaging 30 per tray, 10 trays per box. EMVTM is a trademark owned by EMVCoLLC. Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 10 CCM01 MK III Dimensional Drawings CCM01-6101 0,9 ±0,05 Card entry 61,1 ±0,2 54,2 +0,2 0 Card entry 4,2 3,9 (58) 3x 2,54 10x A B 0,7 29 29 (50,3) A (40) A-A A Designation & Date-Code area 5,9 Card stop 0,6 3,81 22,12 40 A B ø3,1 20 19,05 10 36,4 6101 XXXX 0,75±0,25 2,54 B 10 19,05 2,9±0,3 15,4±0,2 1,6 PCB Thickness 25˚ 4 Snap feet 6101 XXXX 6,8 (3,9) Embossed Channel Pick and place area ø8 3,7±0,2 Card entry 4x 0,4 A PCB Layout CCM01-6101 19,05 16,51 58 33,55 0 Plastic outline 22,12 24,66 27,2 29,74 (Component side) Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center. C1 C2 C3 C4 SW SW Card end travel switch terminals (3,81) (3,81) 10 0 10 19,05 Contact location according to ISO 7816-2 C5 C6 C7 C8 +0,1 10x ø1 0 4x ø0,1 ø0,1 +0,1 ø 3,2 0 Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 11 CCM01 MK III Dimensional Drawings CCM01-6201 3,81 1,6 PCB Thickness 25˚ 4 Snap feet 10x 3x 2,54 0,6 A B 4,2 3,9 (3,9) 7,8 Embossed Channel (58) 0,9 ±0,05 Card entry 61,1 ±0,2 54,2 +0,2 0 Card entry 22,12 0,7 (50,3) 29 (40) 29 A 0,75 ±0,25 15,4 ±0,2 36,4 40 B 10 19,05 2,9 ±0,3 16,51 Designation & Date-Code area Card stop A-A 5,9 A A B ø 3,1 20 10 6201 XXXX 3,7 ±0,2 Card entry 4x 0,4 A PCB Layout CCM01-6201 19,05 C8 C7 C6 C5 SW 16,51 C4 C3 C2 C1 SW Card end travel switch terminals Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center. (3,81)(3,81) 10 0 18,31 58 Plastic outline 29,74 27,2 24,66 22,12 (Component side) 0 10 Contact location according to ISO 7816-2 +0,1 ø 10 10x 4x ø0,1 ø0,1 +0,1 ø3,2 0 Unless otherwise stated, tolerances are ± 0,10 mm Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 12