smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 12 CCM02 Series Features Typical Applications • Operating life 500,000 cycles • Transaction • Insertion force 40N • Identification • EMV • POS • PCI & PCI ready Full Size • Card detection sealed switch Mechanical Contact Electrical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Card detection switch Insulation resistance Resistance Current rating Dielectric strength 8 500,000 cycles min 10N to 40N 1N min / 10N max 0,2N / 0,50N max 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop) 1,8 N max for complete depression Vibration Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35mm Max elect. discontinuity 1µs Shock Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA Environmental Data Operating temperature Damp heat Salt mist Card detection switch RoHS compliant Packaging Tray 30 parts / Cartons 300 parts Reel 120 parts -40°C to +85°C IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed against dust Soldering Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for soldering recommendations. PCI Features Designation Termination Contact Type I/O Protect Security Cover Total Height (mm) Dimension PCB version CCM02-2503LFT THT landing 6,25 38,5 X 55,6 4 clips CCM02-2504LFT SMT landing 6,25 38,5 X 55,6 4 clips CCM02-F503LFT THT friction 6,25 38,5 X 55,6 4 clips CCM02-F504LFT SMT friction 6,25 38,5 X 55,6 4 clips CCM02-F796LFT SMT friction 6,25 38,5 X 55,6 4 metal pegs CCM02 F794LFT SMT friction Yes 6,25 38,5 X 55,6 4 metal pegs CCM02-F844LFT SMT friction Yes 6,6 40,5 X 58 4 metal pegs Yes Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 12 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 13 CCM02 Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM02-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. Specifications and dimensions subject to change www.ck-components.com 13 Full Size Process smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 14 CCM02 Series CCM02-2503 LFT / CCM02-F503 LFT 55,6±0,2 DETAIL A Scale 5 4,3±0,2 19,12 2,54 3,15 10x 4 Snap Feet 5x (3,2) 0,95 6,25 Embossed Channel 0,3 A B 4x 0,7 ø 0,2 A B 2,9±0,2 52 A A-A 5,75 Designation & Date-Code area "CCM02" marking is optional SEE DETAIL A Card stop 14 15,7 12,7 B 10 12,7 4 1±0,25 3,2 A 38,5 7,7±0,3 20 F503T XX XX A Card insertion direction 4,15±0,3 Card entry 52 31,82 29,28 26,74 24,2 21,66 19,12 RECOMMENDED PC BOARD LAYOUT (Component side) 0 Plastic outline SW SW 3,2 C1 C2 C3 C4 Card end travel switch terminals (55,6) 12,7 10 12,7 0 F503T XX XX 3,81 3,81 Full Size 1,6 PCB Thickness 0.65 (50) (38,5) 14 C5 C6 C7 C8 20 1,8 +0,1 ø10 10x ø 0,1 (4x) ø 3,2 +0,1 0 ø 0,1 Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 14 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 15 CCM02 Series Full Size CCM02-2504 LFT / CCM02-F504 LFT Contact location according to ISO 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 15 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 16 CCM02 Series CCM02-F796 LFT 55,6±0,2 0.65 DETAIL A Scale 5 2 0,8 (3,2) 1,5 2,54 4x 4 Metal Pegs ø 0,2 ø 1,62±0,05 A B 0,2±0,15 2 51,5 Designation & Date-Code area "CCM02" marking is optional A A-A SEE DETAIL A 3,2 +0,4 -0,2 5,75 26,35±0,3 15,7 14 6 1±0,25 Card stop B 10 38,5 7,7±0,3 20 F796T XX XX A Card insertion direction Pick and place area 10x 0,3 A ø 13 1 4,15±0,3 Card entry 51,5 31,57 29,03 26,49 23,95 21,41 1,7 SW SW Pad C1 C2 C3 C4 (55,6) Card end travel switch terminals 0,8 x 1 10 1,5 11,45 F796T XX XX 3,81 0 26,35±0,3 3,81 12,65 8,84 1,5 3,1 14 3,2 Plastic outline Contact foot area 0,8 x 1 18,87 RECOMMENDED PC BOARD LAYOUT (Component side) 0 Full Size 5x 0,8 6,25 2,05 0,95 Embossed Channel 4,3±0,2 54,3 (50) (38,5) C5 C6 C7 C8 20 2,05 1,3 10x 4x 0,2 +0,1 ø 0,1 ø 1,9 0 Metallized holes Contact location according to ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 16 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 17 CCM02 Series 55,6 2 CCM02-F794 LFT 0,2 0.65 0,8 Embossed Channel Contacts security (open position) 8 2,05 DETAIL A Scale 5 4,3 0,2 (3,2) 0,95 5x 2,54 14x 0,3 A 1.5 2x 1,62 0,05 4x 0,2 A B 1 51,5 0,8 0,2 Metal pegs 0,15 2 18,87 Full Size 6.25 A-A A SEE DETAIL A 3,2 A 5,75 +0,4 -0,2 1 0,3 0,25 B 6 14 26,35 Card stop 15,7 Designation & Date-Code area "CCM02" marking is optional 16,9 (closed position) 38,5 10 2794T XX XX A 20 Pick and place area 13 4,15 Card insertion direction 45 0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) 18, 21, 23, 26 , 29, 31, 0 Contact foot area 0,8 x 1 1,7 Pad (55,6) SWSW 3,2 C1C2C3C4 3,1 14 51, 5 87 41 95 49 03 57 Plastic outline 2794T XX XX 1,5 26,35 switch terminals 0.3 0,8 x 1 0 3,81 3,81 Card end travel 12,65 (51,25) (38,5) 11,45 1,5 10 C5 C5C6C7C8 2 C7 C8 2 3,24 20 C6 Piracy switch (14x) 1,3 0,2 +0,1 1,9 0,1 0 (4x) Metallized holes Contact location according to Contacts security ISO/IEC 7816-2 Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 17 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 18 CCM02 Series CCM02-F844a LFT / CCM02-F844b LFT 0,2±0,1 DETAIL B Scale 5 58±0,3 0,95 4,3±0,2 (5x) 2,54 0,2±0,15 metal peg (4x) Ø 1,62 ± 0,05 Ø 0.2 A B 51,5 A A-A 10 Labelling : Designation & Date-Code area 26,35±0,3 B 14 A Card stop 6 SEE DETAIL B 1±0,25 18,87 16,9 (closed position) (14x) 1 15,7 A 20 0,3 1,6 -0,10 Full Size Embossed Channel 3,2 +0,4 -0,2 0,8 2,05 0,8 0,7 F844T xx xx Contacts security (closed position) A 3,6±0,3 Card entry RECOMMENDED PC BOARD LAYOUT (Component side) 45º C5 C6 C7 C8 11,3 38 18,87 21,41 23,95 26,49 29,03 31,57 0 Card end travel switch terminals 38,8 SWSW P1 P3 3,1 1,7 C1 C2 C3 C4 Scale 1 12,65 11,45 C5 C6 C7 C8 Protection cover terminals 2 1,5 3,24 20 F844T xx xx (6x) 1,3 0,05 P1 Card insertion direction P4 P3 (6x) 1,5 0,05 3,81 3,81 P2 0 1,27 (58) 1,27 Plastic outline 1,3 (50) (40,5) Please don't apply any solder paste on these 4 pads 37,2 9,7 0,2 0 Contact location according to ISO/IEC 7816-2 P4 1,5 3,81 14 \Piracy switch \ P2 51,5 metallized holes (4x) Ø 1,9 Ø 0,1 A 10,5 Contact foot area Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com 18