STEVAL-MKI010V1 LIS3L02AS4 adapter board designed to be plugged into a standard DIL 20 socket Data Brief Features ■ Complete LIS3L02AS4 pinout in standard DIL 20 socket Description The STEVAL-MKI010V1 adapter board is based on LIS3L02AS4 3-axis analog output linear accelerometer and is intended to provide the user with an effective solution for fast system prototyping and device evaluation directly within the user’s application. The STEVAL-MKI0010V1 is designed to be plugged into a standard DIL 20 socket. It provides the user with the complete LIS3L02AS4 pinout, and comes ready-to-use with the required decoupling capacitors on the VDD power supply line. STEVAL-MKI010V1 The pinout of the adapter is designed to be fully compatible with all other available adapter boards so that the user can easily switch from one sensor to another during evaluation without the need for board redesign October 2007 Rev 1 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 4 C1 100nF Scheme Figure 1. P01 P13 + C2 10uF P13 P01 P06 P16 P04 P18 P08 1 2 3 4 5 6 7 8 9 10 11 12 LIS3L02AS4 NC NC NC NC NC GND VDD Vy ST Vx PD Vz NC NC NC NC NC NC Rsvd Rsvd Rsvd Rsvd Rsvd FS 24 23 22 21 20 19 18 17 16 15 14 13 P13 P01 P01 P01 P01 P17 P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 JP1 1 2 3 4 5 6 7 8 9 10 11 12 JP2 24 23 22 21 20 19 18 17 16 15 14 13 Header 12Header 12 P24 P23 P22 P21 P20 P19 P18 P17 P16 P15 P14 P13 2/4 Board schematic 1 STEVAL-MKI010V1 Board schematic STEVAL-MKI010V1 2 Revision history Revision history Table 1. Document revision history Date Revision 16-Oct-2007 1 Changes Initial release 3/4 STEVAL-MKI010V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4