STEVAL-MKI021V1 MEMS 3-axis ± 2g analog-output demonstration board based on the nano accelerometer LIS331AL Data brief Features ■ 3-axis, ±2g motion sensor with analog output ■ embedded self-test ■ high shock survivability (up to 10000g per 0.1 sec) ■ RoHS compliant Description The STEVAL-MKI021V1 demonstration board is designed to provide the user with a complete, ready-to-use platform for the evaluation of the LIS331AL. STEVAL-MKI021V1 The LIS331AL is the smallest consumer lowpower 3-axis linear capacitive accelerometer. It includes a sensing element and an IC interface capable of taking information from the sensing element and providing an analog signal to an external application. In addition to the MEMS sensor, the system includes a linear voltage regulator and a rail-to-rail low-noise quad amplifier configured as a noninverting buffer, making both direct sensor outputs and buffered sensor outputs available to the user. The STEVAL-MKI021V1 also provides an easy mean of controlling the power-down and self-test pins. February 2011 Doc ID 18300 Rev 1 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 4 2/4 # U& Doc ID 18300 Rev 1 # N& 2SVD 0$ 34 .# 2SVD .# .# 6DD '.$ 2 + 6$$ .# 2SVD * 6$$ # U& 0OWER3UPPLY * 6$$ # N& 0OWER$OWN * 3ELF4EST ,% 5 PSR 6$$ 6OUT: .# 6OUT9 .# 6OUT8 #Z N& 69 #X N& 6$$ #Y N& 6OUT: 6OUT9 6OUT8 5 ,)3!, 6OUT 9 6OUT8 68 43 6/54 6/54 6 6 6 6 '.$ 6## 6 6 6 6 6/54 6/54 5 6: 6OUT8 6OUT9 6OUT: 6OUT : * 3ENSOR/UTPUT "UFFERED/UTPUT Figure 1. * 1 * 5 ,% 68 69 6: Circuit schematic STEVAL-MKI021V1 Circuit schematic Demonstration board schematic and connection diagram !-6 STEVAL-MKI021V1 2 Revision history Revision history Table 1. Document revision history Date Revision 23-Feb-2011 1 Changes Initial release. Doc ID 18300 Rev 1 3/4 STEVAL-MKI021V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4 Doc ID 18300 Rev 1