Part Number: DUG10C3 10.2mm (0.4”) THREE DIGIT NUMERIC DISPLAY www.SunLED.com Features ● 0.4 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●I.C. COMPATIBLE. ●MECHANICALLY RUGGED. ●STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=10mA) λP 565 nm Wavelength Of Dominant Emission (Typ.) (IF=10mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PT 62.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Green Published Date : MAR 12,2008 V 2.5 Forward Current DUG10C3 2.0 VF V Emitting Color VF Forward Voltage (Max.) (IF=10mA) 5 Part Number Forward Voltage (Typ.) (IF=10mA) Unit VR Lead Solder Temperature [2mm Below Package Base] Unit UG (GaP) Reverse Voltage Storage Temperature UG (GaP) 140 mA mW °C 260°C For 3~5 Seconds Emitting Material GaP Luminous Intensity (IF=10mA) ucd min. typ. 1900 8490 Drawing No : SDSA2250 Wavelength nm λP Description 565 Common Cathode V4 Checked : Shin Chi P.1/4 Part Number: DUG10C3 10.2mm (0.4”) THREE DIGIT NUMERIC DISPLAY www.SunLED.com UG Published Date : MAR 12,2008 Drawing No : SDSA2250 V4 Checked : Shin Chi P.2/4 Part Number: DUG10C3 10.2mm (0.4”) THREE DIGIT NUMERIC DISPLAY www.SunLED.com Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 12,2008 Drawing No : SDSA2250 V4 Checked : Shin Chi P.3/4 Part Number: 10.2mm (0.4”) THREE DIGIT NUMERIC DISPLAY www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 12,2008 DUG10C3 DUG10C3 Drawing No : SDSA2250 V4 Checked : Shin Chi P.4/4