SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN07078 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 69.9 70 70.1 dB - 24.2 25 1 dB Bandwidth MHz - 19.53 - 3 dB Bandwidth MHz 19.8 19.86 - 40 dB Bandwidth MHz - 20.82 21.0 50 dB Bandwidth MHz - 20.91 - Passband Variation dB - 0.7 1.0 Absolute Delay usec - 2.91 3.0 Ultimate Rejection dB 50 55 - 128 LiNbO3 Subatrate Material °C Ambient Temperature 25 (35.0x12.7x5.2mm3) DIP3512 Package Size Typical Performance Type performance -24.264 -34.264 Magnitude(dB) -44.264 -54.264 -64.264 -74.264 -84.264 -94.264 -104.264 46 Package Outline 52 58 64 70 76 Frequency(MHz) 82 88 94 Matching Configuration L1=L2=56nH L3=180nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]