SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBN14045 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 139.875 140 140.125 dB - 25 27 1.5 dB Bandwidth MHz 15 15.05 - 20 dB Bandwidth MHz - 15.75 15.8 25 dB Bandwidth MHz - 15.9 16.05 30 dB Bandwidth MHz - 16.05 16.5 - 16.15 17.5 40 dB Bandwidth Ultimate Rejection dB 40 45 - Passband Variation dB - 1.2 1.5 Absolute Delay usec - 2.85 2.95 YZ LN Subatrate Material °C Ambient Temperature 25 DIP3512 Package Size (35.2x12.7x5.2mm3) Typical Performance Type performance -25.8092 -35.8092 Magnitude(dB) -45.8092 -55.8092 -65.8092 -75.8092 -85.8092 -95.8092 -105.8092 120 Package Outline 125 130 135 140 145 Frequency(MHz) 150 155 160 Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]