SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBS11519 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 114.95 115 115.05 dB - 26.78 28 3 dB Bandwidth MHz 4.8 4.89 - 28 dB Bandwidth MHz - 5.52 5.6 38 dB Bandwidth MHz - 5.75 5.8 43 dB Bandwidth MHz - 5.85 6.0 Passband Variation dB - 0.7 1.0 Group Delay Variation nesc - 60 180 Absolute Delay usec - 3.79 - Ultimate Rejection dB 45 50 - Quartz Subatrate Material °C Ambient Temperature 25 (35.0x12.7x5.2mm3) DIP3512 Package Size Typical Performance Type performance -26.7857 -36.7857 Magnitude(dB) -46.7857 -56.7857 -66.7857 -76.7857 -86.7857 -96.7857 -106.7857 103 Package Outline 106 109 112 115 118 Frequency(MHz) 121 124 127 Matching Configuration L1=180nH L2=120nH C1=C2=51pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]