SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute LBS12010 SAW Filter Electrical Characteristic Specifications Parameter Unit Minimum Typical Maximum Center Frequency Insertion Loss MHz 119.875 120 120.125 dB - 27 28 1.5 dB Bandwidth MHz 1.65 1.7 - 18 dB Bandwidth MHz - 2.25 2.4 25 dB Bandwidth MHz - 2.4 2.6 30 dB Bandwidth MHz - 2.6 2.8 40 dB Bandwidth MHz - 2.8 3.5 Passband Variation dB - 1.0 1.5 Absolute Delay usec - 2.66 2.75 Ultimate Rejection dB 40 45 - Quartz Subatrate Material Ambient Temperature °C 25 Yes Match DIP3512 Package Size (35.0x12.7x5.2mm3) Typical Performance Package Outline Matching Configuration Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected] SIPAT Co.,Ltd www.sipatsaw.com China Electronics Technology Group Corporation No.26 Research Institute P.O. Box 2513 Chongqing, China 400060 Tel:+86-23-62920684 Fax:62805284 E-mail: [email protected]