LX5540 ® TM Co-Package 2.3 – 2.5 GHz HBT Power Amplifier & pHEMT Low Noise Amplifier P RODUCTION D ATA S HEET KEY FEATURES DESCRIPTION For 20dBm OFDM output power (64QAM, 54Mbps), the PA provides a low EVM (Error-Vector Magnitude) of 3%, and consumes 145 mA total DC current. The LNA offers 14 dB gain, 1.5 dB noise figure and a high input IP3 of +4 dBm at 10 mA of DC current. LX5540 is available in a 16-pin 3mmx3mm micro-lead package (MLPQ-16L). The compact footprint, low profile, and thermal capability of the MLP package makes the LX5540 an ideal solution for medium-gain power transmitter and very low noise receiver requirements for IEEE 802.11b/g applications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Advanced InGaP HBT 2.3-2.5GHz Operation Single-Polarity 3.3V Supply Quiescent Current 80mA Power Gain 28 dB Total Current 145mA for Pout=20 dBm OFDM EVM~3% at 20dBm 54Mbps /64QAM LNA Gain ~ 14 dB LNA Noise Figure ~ 1.5dB LNA Input IP3 ~ +4dBm On-Chip Bias Circuit On-Chip Input/Output Match Small Footprint: 3x3mm2 Low Profile: 0.45mm WWW . Microsemi .C OM LX5540 is a co-package RFIC consisting of an InGaP/GaAs Heterojunction Bipolar Transistor (HBT) power amplifier and a InGaAs Enhancement mode pseudomorphic HEMT (E-pHEMT) low noise amplifier. Both are optimized for WLAN applications in the 2.3-2.5 GHz frequency range. The PA is implemented as a two-stage monolithic microwave integrated circuit (MMIC) with active bias and output pre-matching. The LNA is fully matched internally and no external matching circuit is required. Both devices operate with single low voltage supply of 3.3V. The PA offers 28 dB power gain between 2.32.5GHz, at a low quiescent current of 80mA. APPLICATIONS IEEE 802.11b/g PRODUCT HIGHLIGHT MSC MSC 5530 5540 608Y 717A LL Plastic MLPQ 16 pin 3X3 mm RoHS Compliant / Pb-free LX5540LL Note: Available in Tape & Reel. Append the letters “TR” to the part number. (i.e. LX5540LL-TR) Copyright © 2006 Rev. 1.0e, 2007-09-14 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 LX5540 PACKAGE ORDER INFO TM ® Thank you for your interest in Microsemi® Analog Mixed Signal products. The full data sheet for this device contains proprietary information. To obtain a copy, please contact your local Microsemi sales representative. The name of your local representative can be obtained at the following link http://www.microsemi.com/contact/contactfind.asp or Contact us directly by sending an email to: [email protected] Be sure to specify the data sheet you are requesting and include your company name and contact information and or vcard. We look forward to hearing from you. Copyright Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 WWW . Microsemi .C OM INFORMATION