Part Number: ZMD64W-8 www.SunLED.com SUBMINIATURE SOLID STATE LAMP PRELIMINARY SPEC Features ●SUBMINIATURE PACKAGE. ●WIDE VIEWING ANGLE. ●YOKE LEAD. ●LONG LIFE-SOLID STATE RELIABILITY. ●LOW PACKAGE PROFILE. ●PACKAGE : 1000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 3. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MD (InGaAlP) Unit Operating Characteristics (TA=25°C) VF 1.9 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 185 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 75 mW λP 640 nm TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 628 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 27 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 45 pF VR 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature °C Part Number ZMD64W-8 Unit Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature MD (InGaAlP) Emitting Color Red Published Date : FEB 25,2008 Emitting Material InGaAlP Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA4604 V5 min. typ. 650 1590 Wavelength nm λP Viewing Angle 2 θ 1/2 640 20° Checked : B.L.LIU P.1/4 Part Number: ZMD64W-8 www.SunLED.com SUBMINIATURE SOLID STATE LAMP MD Published Date : FEB 25,2008 Drawing No : SDSA4604 V5 Checked : B.L.LIU P.2/4 Part Number: ZMD64W-8 www.SunLED.com SUBMINIATURE SOLID STATE LAMP Recommended Soldering Pattern (Units : mm; Tolerance:± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25,2008 Drawing No : SDSA4604 V5 Checked : B.L.LIU P.3/4 Part Number: ZMD64W-8 www.SunLED.com SUBMINIATURE SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 25,2008 Drawing No : SDSA4604 ZMD64W-8 V5 Checked : B.L.LIU P.4/4