Part Number: www.SunLED.com LUR12D14V T-1 3/4 (5mm) SOLID STATE LAMP Features z LOW POWER CONSUMPTION. z POPULAR T-1 3/4 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z 14V INTERNAL RESISTOR. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) UR (GaAsP/ GaP) Unit 10.5 mA mW Forward Current (Max.) (VF=14V) IF 13.5 mA °C Reverse Current (Max.) (VR=14V) IR 10 uA Wavelength of Peak Emission (Typ.) (VF=14V) λP 627 nm Spectral Line Full W idth At Half-Maximum (Typ.) (VF=14V) λD 625 nm Spectral Line Half-Width (VF=14V) (Typ.) Δλ 45 nm 5 V Forward Voltage VF 16 V Power Dissipation PT 160 Operating Temperature TA -40 ~ +70 Tstg -40 ~ +85 Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base 260°C For 5 Seconds LUR12D14V Emitting Color Red Published Date : MAR 17, 2008 Emitting Material GaAsP/GaP Unit IF VR Part Number UR (GaAsP/ GaP) Forward Current (Typ.) (VF=14V) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Luminous Intensity (V=14V) mcd Lens-color Red Diffused Drawing No : SDSA4846 min. typ. 12 29 V3 Wavelength nm λP Viewing Angle 2 θ 1/2 627 30° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LUR12D14V T-1 3/4 (5mm) SOLID STATE LAMP UR Published Date : MAR 17, 2008 Drawing No : SDSA4846 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LUR12D14V T-1 3/4 (5mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% Note: Accuracy may depend on the sorting parameters. Published Date : MAR 17, 2008 Drawing No : SDSA4846 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 3/4 (5mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 17, 2008 LUR12D14V Drawing No : SDSA4846 LUR12D14V V3 Checked : B.L.LIU P.4/4