Bulletin I27220 03/06 200MT40KPbF THREE PHASE BRIDGE Power Module Features Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case Low power loss 200 A Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules 4000 VRMS isolating voltage UL E78996 approved TOTALLY LEAD-FREE Description It extents the existing range of MT...KB bridges an extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications. Major Ratings and Characteristics Parameters IO @ TC Values Units 200 A 85 °C IFSM @ 50Hz 1800 A @ 60Hz 1880 @ 50Hz 16.2 @ 60Hz 14.7 2 I t KA2s I2√t 162 KA2√s VRRM 400 V TSTG range - 40 to 150 °C TJ - 40 to 150 range www.irf.com 1 200MT40KPbF Bulletin I27220 03/06 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number VRRM, maximum VRSM, maximum IRRM max. repetitive peak reverse voltage V non-repetitive peak reverse voltage V @ TJ = 150°C 400 500 6 200MT40KPbF mA Forward Conduction Parameter 200MT40KPbF Units Conditions IO Maximum RMS output current 200 A 120° Rect conduction angle ITSM @ Case temperature Maximum peak, one-cycle 85 1800 °C A t = 10ms forward, non-repetitive 1880 t = 8.3ms reapplied on state surge current 1520 t = 10ms 100% VRRM 1590 I2t I2√t Maximum I2 t for fusing No voltage t = 8.3ms reapplied t = 10ms t = 8.3ms No voltage reapplied 11.6 t = 10ms 100% VRRM 12.6 t = 8.3ms reapplied 16.2 14.7 Maximum I2√t for fusing 162 KA2s Initial TJ = TJ max. KA2√s t = 0.1 to 10ms, no voltage reapplied VF(TO) Value of threshold voltage 0.76 V rt Slope resistance 2.4 mΩ @ TJ max. VFM Maximum forward voltage drop 1.40 V Ipk = 200A, TJ = 25°C, tp = 400μs single junction VINS Insulation voltage 4000 V TJ = 25oC all terminal shorted, f = 50Hz, t = 1s Thermal and Mechanical Specifications Parameter TJ Maximum junction operating 200MT40KPbF Units Conditions - 40 to 150 °C -40 to 150 °C Maximum thermal resistance, 0.12 K/W junction to case 0.69 DC operation per junction 0.14 120° Rect condunction angle per module temperature range Tstg Maximum storage temperature range RthJC 0.82 RthCS Maximum thermal resistance, 120° Rect condunction angle per junction 0.033 K/W 4 to 6 Nm 176 g case to heatsink T Mounting torque ± 10% to heatsink wt 2 Approximate weight DC operation per module Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. www.irf.com 200MT40KPbF Bulletin I27220 03/06 Ordering Information Table Device Code 20 0 MT 40 1 2 3 4 K PbF 5 1 - Current rating code: 20 = 200 A (Avg) 2 - Three phase diodes bridge 3 - Essential part number 4 - Voltage code: Code x 10 = VRRM (40 = 400V) 5 - PbF = Lead-Free Outline Table (without optional barriers) D A B C E F All dimensions in millimeters (inches) NOTE: To order the Optional Hardware see Bulletin I27900 www.irf.com 3 200MT40KPbF Bulletin I27220 03/06 Outline Table (with optional barriers) D A B C E F 140 1000 130 120 110 120˚ (Rect) 100 90 80 70 60 80 100 120 140 160 180 200 220 Total Output Current (A) Fig. 1 - Current Rating Characteristics 4 Instantaneous On-state Current (A) Maximum Allowable Case Temperature (°C) All dimensions in millimeters (inches) 100 Tj = 25˚C 10 Tj = 150˚C 1 0.5 1 1.5 2 2.5 3 Instantaneous On-state Voltage (V) Fig. 2 - On-state Voltage Drop Characteristics www.irf.com 200MT40KPbF 1600 Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Bulletin I27220 03/06 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 1400 1200 1000 800 600 Per Junction 400 1 10 2000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 1600 Initial T j = 150˚C No Voltage Reapplied 1400 Rated V rrm Reapplied 1800 1200 1000 800 600 400 200 Per Junction 0 0.01 100 0.1 1 10 Pulse Train Duration(s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 3 - Maximum Non-Repetitive Surge Current Fig. 4 - Maximum Non-Repetitive Surge Current 5 02 0. = A hS Rt W K/ 05 0. 0. 1 400 a elt -D R 0.2 K/ W 0.3 K/W 120˚ (Rect) 300 K/ W W K/ Maximum Total Power Loss (W) 500 0.5 K/W 200 1 K/W 100 Tj = 125˚C 0 0 40 80 120 160 Total Output Current (A) 0 200 30 60 90 120 150 Maximum Allowable Ambient Temperature (°C) Transient Thermal Impedance Z thJC (K/W) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) 10 Steady State Value RthJC per junction = 0.69 K/W DC Operation) 1 0.1 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 6 - Thermal Impedance Z thJC Characteristics www.irf.com 5 200MT40KPbF Bulletin I27220 03/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/06 6 www.irf.com