P9 Vishay Sfernice 9 mm Multi-Ganged Potentiometer FEATURES • Conductive plastic element • Ultra compact (extra miniature module size) • Multiple assemblies (up to seven modules) RoHS COMPLIANT • Shaft and panel sealed option • Center mechanical detent fully integrated in option • Center tap option • Custom designs available on request DIMENSIONS in millimeters [inches] (± 0.5 mm) P9A 9.5 [0.37] L: see Shaft Table 3.6 [0.14] 2.5 [0.10] 2.5 [0.10] M7 x 0.75 11.35 [0.45] 1 [0.04] P9 6.4 [0.25] 3 3.5 [0.14] 2.5 [0.10] 7 [0.276] 2.5 [0.10] 5 [0.20] P9A: Vertical Mounting see Shaft Table 0.9 [0.04] 2.5 [0.10] 0.45 R [0.02] P9A Center Tap: 3.45 [0.14] 2 [0.08] 3.8 [0.15] 7.5 [0.30] 5.6 [0.22] 4.7 [0.19] see Bushing Table 2.5 [0.10] 3.5 [0.14] 3x 0.9 2.5 [0.04] [0.10] 0.2 [0.01] 2.5 [0.10] 2.5 [0.10] 2.5 [0.10] 2.5 [0.10] P9A Center Tap: Vertical Mounting 7.5 [0.30] www.vishay.com 1 2.5 [0.10] For technical questions, contact: [email protected] 7.9 [0.31] Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice P9 - GENERAL SPECIFICATIONS ELECTRICAL Resistive Element Conductive Plastic Electrical Travel 270° ± 10° linear law 1 kΩ up to 1 MΩ Resistance Range non linear law 2.2 kΩ up to 500 kΩ linear law 0.1 W non linear law 0.05 W Power Rating at 70 °C multiple assemblies linear law 0.05 W per module multiple assemblies non linear law 0.025 W per module Temperature Coefficient (Typical) ± 500 ppm Limiting Element Voltage 10 VDC 50 VAC End Resistance (Typical) 3Ω Contact Resistance Variation linear law (typical) 2 % of nominal resistance Independent Linearity linear law (typical) ±5% Insulation Resistance 100 MΩ at 250 VDC Dielectric Strength 300 VAC during 1 min Attenuation (Typical) 90 dB max./0.05 dB min. MECHANICAL Mechanical Rotational Life 25 000 cycles min. Mechanical Travel 300° ± 5 Operating Torque 0.2 Ncm up to 2.5 Ncm (0.3 to 3.5 oz.inch) End Stop Torque 50 Ncm max. (4.4 lbinch max.) Shaft Push/Pull Force 7 DaNcm max. (15.7 lbf max.) Weight (One Module) 6.25 g (without nut and washer) (0.22 oz.) ENVIRONMENTAL Temperature Range - 55 °C up to 100 °C Climatic Category MARKING 55/100/21 PACKAGING • Type of element • Code for tolerance • Code for ohmic value • Taper • B2 = Box of 25 pieces • B4 = Box of 100 pieces • Code for date code Document Number: 51047 Revision: 26-Nov-07 For technical questions, contact: [email protected] www.vishay.com 2 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice PERFORMANCES TYPICAL VALUE AND DRIFTS TESTS CONDITIONS Load Life ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER 1000 h under nominal power at 70 °C (90 ON/30 OFF) ±5% ± 10 % Contact resistance variation < 5 % Rn - 55 °C to + 100 °C 5 cycles ± 0.5 % - - 21 days at 40 ± 2 °C and 90 - 95 % relative humidity ±5% - Insulation resistance > 10 MΩ 25 000 cycles at rated power 90 % of electrical travel 16 cycles per minute Temperature: 20 °C ±6% ± 12 % Contact resistance variation 50 g, 11 ms 3 shocks - 3 directions ± 0.2 % ± 0.5 % - 10 - 55 Hz 0.75 mm or 10 g 6h ± 0.2 % - ± 0.5 % Temperature Cycle Moisture Rotational Life Shock Vibration SAP ORDERING INFORMATION (Part Number 18 digits) P 9 A NUMBER OF MODULES MODEL 1 R 0 LOCATING PEG BUSHING 1 to 7 1 0 PANEL SEALED F I DETENT OPTION R X 1 1 0 PIN STYLE SHAFT 3 M A RESISTANCE CODE/ TOLERANCE CODE/ TAPER R = M7 x 0.75 - 7 mm X = M7 x 0.75 - 5 mm BUSHING X: Bushing R: Bushing • Nut tightening torque M7 bushing 120 Ncm max. (10.6 lbinch max.) • Nut and washer are delivered in standard packaging M7 x 0.75 M7 x 0.75 10 5 [0.20] 7 [0.28] 2 M7 x 0.75 0.7 www.vishay.com 3 For technical questions, contact: [email protected] Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P MODEL 9 A NUMBER OF MODULES 1 R BUSHING 1 0 LOCATING PEG 0 F PANEL SEALED 0 = without 1 = with I DETENT OPTION 0 = without 0 = without P = with M = center detent LOCATING PEG R X 1 1 0 3 A RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE SHAFT M see code below PANEL SEALED 2 [0.08] 0.8 [0.03] • Only for R bushing without locating peg. • Front mounting surface for R bushing with panel sealed option is: 6.2 mm ± 0.5 0.8 [0.03] • The ring is delivered with nut and washer. 5.6 [0.22] • The seal should be placed between panel and body. Sealing is obtained by tightening the seal against the panel when mounting the potentiometer. Tightening torque 50 Ncm up to 100 Ncm • Advised Panel Hole dimensions DETENT OPTION Ø 6.9 [0.27] Ø 6.9 [0.27] • Stable position and in Mid mechanical travel • Rotational life: 10 000 actuations Full CW 2.35 4.7 [0.09] [0.19] Full CCW SHAFT DIAMETER - FMS - STYLE L (mm) 15 20 25 30 Style Round Slotted Flat Knurled Round Slotted Flat Round Slotted Flat Round Slotted Flat Ø 3.5 DFR DFS DFF - DIR DIS DIF DLR DLS DLF DMR DMS DMF FFF FGK (1) FIR FIS FIF FLR FLS FLF FMR FMS FMF Ø6 FFR FFS Note (1) For X bushing (16 mm) Round Slotted Flat Knurled For D Diameter: Ø 4.7 mm For F Diameter: Ø 6 mm Ø 1 [0.039] 6 [0.236] 5 [0.197] P1 0.5 [0.020] 1.6 [0.06] Ø L 0.5 [0.020] Document Number: 51047 Revision: 26-Nov-07 1 [0.039] P2 L P1 Ø 3.5 = 2.5 mm Ø 6 = 4.5 mm P2 L = 15 mm → 7 mm L > 15 mm → 12 mm For technical questions, contact: [email protected] 20° 18 teeth 90° www.vishay.com 4 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P MODEL 9 A NUMBER OF MODULES 1 R 1 0 LOCATING PEG BUSHING 0 PANEL SEALED F I DETENT OPTION R X 1 1 0 M A RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE SHAFT 3 see Pin Table First digit: Pin type X, J, S, Z, P, L W or N Second digit: Pin Configuration 1, 2, 3, 4 or N PIN STYLE - HORIZONTAL MOUNTING PIN TYPE 3.5 [0.14] X PC mount J PC mount center tap S Soldering style Z Center tap soldering style L Long pin P Center tap with long pin NN 3.5 [0.14] 11.5 [0.45] If different types of pin style in the same potentiometer PIN CONFIGURATION 1 7 x 2.5 [0.098] 2 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 2.5 mm between gang www.vishay.com 5 7 x 2.5 [0.098] 3 2.5 [0.098] 7 x 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 2.5 [0.098] 2.5 - 5 - 2.5 mm between gang For technical questions, contact: [email protected] 2.5 [0.098] 2.5 [0.098] 5 mm between gang Document Number: 51047 Revision: 26-Nov-07 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P MODEL 9 NUMBER OF MODULES A 1 BUSHING R 1 0 LOCATING PEG 0 PANEL SEALED F I DETENT OPTION R X 1 1 0 M A RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE SHAFT 3 see Pin Table First digit: Pin type X, J, S, Z, P, L W or N Second digit: Pin Configuration 1, 2, 3, 4 or N PIN STYLE - VERTICAL MOUNTING W1 Single gang vertical mounting 4.7 [0.19] W2 Dual gang vertical mounting 7.5 [0.3] W3 W4 Single gang with center tap vertical mounting 3.8 10.8 [0.15] [0.43] 2.5 [0.098] 7.5 [0.3] 2.5 [0.098] W1 - W3 2.5 [0.098] 2.5 [0.098] W2 - W4 Dual gang with center tap vertical mounting Document Number: 51047 Revision: 26-Nov-07 For technical questions, contact: [email protected] www.vishay.com 6 P9 9 mm Multi-Ganged Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P MODEL 9 A NUMBER OF MODULES 1 R 1 0 LOCATING PEG BUSHING 0 F PANEL SEALED I DETENT OPTION R X 1 1 0 M A RESISTANCE CODE/ TOLERANCE CODE/ TAPER PIN STYLE SHAFT 3 Resistance code: 102 = 1 kΩ to 105 = 1 MΩ Tolerance code: M = 20 % - K = 10 % Taper: A, L, W, F, S, R or Special code given by VISHAY RESISTANCE CODE TOLERANCE See Conversion Table for ohmic value VARIATION LAWS Standard: M = ± 20 % On request: K = ± 10 % POWER RATING CHART 90 % Linear Law F RATED POWER (W) S R Vs % 50 % Ve A W 20 % L 10 % Non Linear Law 0.05 0 0 25° 50° 75° Electrical travel 270° 15° 0.1 10 20 30 40 50 60 70 80 90 100 110 120 130 AMBIENT TEMPERATURE (°C) 15° Mechanical travel 300° SPECIAL CODES GIVEN BY VISHAY OPTIONS AVAILABLE CIRCUIT DIAGRAM • Custom shaft • Design on request a c (1) (3) b (2) • Specific linearity • Specific interlinearity cw • Specific variation law PART NUMBER DESCRIPTION (for information only) P9A 1 R MODEL MODULES BUSHING www.vishay.com 7 1 0 0 FI R X1 10K 20 % A e3 LEAD LOCATING SEALING DETENT SHAFT SHAFT LEADS VALUE TOL. TAPER SPECIAL SPECIAL (Pb)PEG OPTIONS OPTIONS FREE For technical questions, contact: [email protected] Document Number: 51047 Revision: 26-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1