PE60 Vishay Sfernice Power Panel Potentiometer FEATURES • High power rating (6 W at 50 °C) • Cermet element RoHS • Full sealing COMPLIANT • Mechanical strength • Industrial and professional grade • Tests according to CECC 41 000 DIMENSIONS in millimeters PE 60 L PE 60 F GR = 50.8 (2) FR = 50 (1.969) 150 (5.872) Min Ø 25 8 18 (0.709) FG = 16 (0.630) 150 (5.872) Min FL = 25 (0.984) 18 (0.709) GB = 12.7 GJ = 22.22 (7/8) Slot 1 x 1.8 deep (0.039 x 0.071) (1/2) Ø 6.35 (0.250) Ø6 (0.236) Slot 1 x 1.8 deep Thread M 10 x 75 (0.039 x 0.071) 12 (0.472) Thread 3/8 32-UNEF-2A 9.52 (3/8) wrench = 14 (0.551) OPTION D: DBAN SHAFT LOCKING wrench = 12.5 (0.492) OPTION L: PE 60 LPRP - WITH LOCATING PEG wrench = 14 (0.551) 0.8 (0.031) 3 (0.118) wrench = 12 (0.472) Ø6 (0.236) 12.5 (0.492) 9.2 (0.362) Ø 1.8 (0.071) 2.3 (0.091) 3 (0.118) 6.5 (0.256) Available on PE 60 L and PE 60 F 15 (0.591) Available only with PE 60 L Panel sealed version PE 60 M OPTION E: Including locating peg (available only for PE 60 M) 8 ± 0.2 (0.315 ± Ø 1.2 0.008) (0.047) 21 (0.825) 0.7 (0.028) CIRCUIT DIAGRAM 9 (0.356) Flat Located Ø6 (0.236) Green Yellow (3) (1) CW Ø 10.5 (0.413) Sealing ring (2) Red FD = 13 (0.514) FJ = 22 (0.868) FP = 47 (1.852) Available only with bushing M10 x 0.75 and shafts Ø 6 mm www.vishay.com 134 For technical questions, contact: [email protected] See also: Application notes Document Number: 51005 Revision: 05-Jun-08 PE60 Power Panel Potentiometer SPECIAL FEATURES COMMAND SHAFT Vishay Sfernice SHAFT LOCKING: DBAN Length is measured from the mounting surface to the free end of the shaft. The screwdriver slot is aligned with the wiper within ± 10°. Special shafts are available, in accordance to drawings supplied by customers. We recommend that customers should not machine shafts, in order to avoid damage. PANEL SEALING: PE60M The panel sealing device consists of a ring located in a slot on the potentiometer face. Sealing is obtained by tightening the ring against the panel when mounting the potentiometer. The shaft locking device consists of a tapered nut tightening a slotted notched washer against both bushing and shaft. DBAN tightening torque is 200 Ncm, shaft locking torque being 30 Ncm. DBAN is also available with all special types. This device is normally supplied in a separate bag. Can be pre-mounted on request. LOCATING PEG: LPRP Location is obtained by fitting a special washer on the potentiometer face. The peg can therefore be positioned at 90°, 180°, 270° and 360°. ELECTRICAL SPECIFICATIONS Resistive Element cermet Electrical Travel 270° ± 10° Resistance Range 1 Ω to 1 MΩ Linear Law 100 Ω to 2.2 MΩ Logarithmic Laws Standard series E3 1 - 2 - 2.5 - 5 Tolerance Standard ± 20 % On Request Power Rating ± 10 % - ± 5 % Linear 6 W at + 50 °C Logarithmic 3 W at + 50 °C Temperature Coefficient see Standard Resistance Element Data Limiting Element Voltage (Linear Law) 350 V 3 % Rn or 0.5 Ω Contact Resistance Variation (Linear Law) 0.5 Ω or 1 % End Resistance (Typical) Dielectric Strength (RMS) 2500 V Insulation Resistance (500 VDC) 106 MΩ MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical Travel 300° ± 5° Temperature Range - 55 °C to + 125 °C Operating Torque (max. Ncm) 3 typical Climatic Category 55/125/56 End Stop Torque (max. Ncm) 70 Sealing fully sealed Max Tightening Torque container IP67 of Mounting Nut (Ncm) 250 Unit Weight (max. g) 25 to 35 RESISTANCE LAWS POWER RATING CHART 100 POWER IN W % TOTAL RESISTANCE LIN. LAW “A” 6 LOG. LAWS “L & F” 3 80 F 60 A L 40 20 0 0 0 20 40 60 70 80 100 125 140 0 20 AMBIENT TEMPERATURE IN °C Document Number: 51005 Revision: 05-Jun-08 For technical questions, contact: [email protected] See also: Application notes 40 60 80 100 % CLOCKWISE SHAFT ROTATION www.vishay.com 135 PE60 Power Panel Potentiometer Vishay Sfernice PERFORMANCE TYPICAL VALUES AND DRIFTS TESTS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Climatic Sequence Long Term Damp Heat 56 days Rotational Life Vibration W V 1 6 2.4 2449 3.5 1732 2 mA 5 5.5 1095 10 7.7 775 20 11.0 548 25 12.2 490 50 17.3 346 100 24.5 245 200 34.6 173.2 250 38.7 154.9 500 54.8 109.5 1K 77.5 77.5 2K 110 54.8 2.5K 122 49.0 5K 173 34.64 10K 245 24.49 20K 6 346 17.32 25K 4.90 350 14.00 50K 2.45 7.00 100K 1.23 3.50 200K 0.61 1.75 250K 0.49 1.40 500K 0.25 1M 0.12 www.vishay.com 136 ±3% Contact res. variation: < 3 % Rn ± (0.5 % ± 0.1 Ω) ± 0.2 % 10 - 55 Hz 0.75 mm or 10 g during 6 hours ± 0.1 % ± 0.2 % TYPICAL TCR MAX. CUR. THROUGH - 55 °C + 125 °C WIPER Ω ±1% ± 0.1 % LINEAR LAW MAX. WORKING VOLTAGE ± 0.5 % 50 g at 11 ms 3 successive shocks in 3 directions STANDARD RESISTANCE ELEMENT DATA MAX. POWER AT 25 °C ±1% Contact res. variation: < 5 % Rn 5 cycles - 55 °C at + 125 °C Shock ± 0.5 % ±3% 1000 hours at rated power 90’/30’ - ambient temp. 25 °C Rapid Temperature Change ΔR1-2 (%) R1-2 Insulation resistance: > 104 MΩ 25 000 cycles Load Life STANDARD RESISTANCE VALUES ΔRT (%) RT CONDITIONS ppm/°C MARKING Printed: - VISHAY trademark - SAP Part number - manufacturing date ± 500 PACKAGING - in box of 5 pieces ± 250 0.70 350 0.35 For technical questions, contact: [email protected] See also: Application notes Document Number: 51005 Revision: 05-Jun-08 PE60 Power Panel Potentiometer Vishay Sfernice SAP ORDERING INFORMATION (Part Number 18 digits) P MODEL E 6 0 L 0 F G W 2 0 4 BUSHING OPTION SHAFT LEADS OHMIC VALUE M = Panel sealed L = STD F = 3/8" 0 = none For L Bushing FG 16 mm, slotted FL 25 mm, slotted FR 50 mm, plain W: Wire 204 = 200 kΩ For L Bushing D = DBAN L = LPRP B = DBAN and LPRP For F Bushing L = LPRP M A TOLERANCE LAW ± 20 % on request ± 10 % ±5% A = Linear L = clockwise logarithmic F = clockwise inverse logarithmic For F Bushing GB 1/2", slotted GJ 7/8", slotted GR 2", slotted SPECIAL NUMBER (if applicable) Given by VISHAY for custom design For M Bushing For M Bushing FD = 13 mm, slotted FJ = 22 mm, slotted E = Peg FP = 47 mm, plain PART NUMBER DESCRIPTION (for information only) PE60 L 0 FG W 200 kΩ 20 % A MODEL BUSHING OPTION SHAFT LEADS OHMIC VALUE TOL LAW Document Number: 51005 Revision: 05-Jun-08 BO5 PACKAGING SPECIAL For technical questions, contact: [email protected] See also: Application notes e4 SPECIAL LEAD (Pb)-FREE www.vishay.com 137 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1