TS6 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Ceremt Trimmers, Fully Sealed FEATURES • 0.25 W at 85 °C RoHS • GAM T1 COMPLIANT • Military and professional grade • Multi-turn operation Three variations are available according to the positioning of the control screw and contact positions. The TS6 multi-turn trimmer has been designed for use in PCB surface mounting applications. • A low contact resistance variation (down to 2 % Rn) • Low end contact resistance (1 Ω typical) • Full sealing The cermet track gives a high stability performance with an extended ohmic capacity of 10 Ω to 2 MΩ • Tests according to CECC 41 000 DIMENSIONS in millimeters TS6X RECOMMENDED SOLDERING AREAS slot 0.5 x 0.5 5.8 ± 0.10 5 max 0.25 Ø 1.8 c 1 1 ± 0.10 2.54 0.7 b c b 2.54 2.54 Ø 0.45 a 6.85 max 2.54 3 0.20 7.5 6.7 max 6.85 max TS6Z 3 6.85 max Ø 1.8 slot 0.5 x 0.5 b 5 max 1.3 ± 0.1 9.3 1 ± 0.1 a c 7.6 max 0.25 6.85 max 8.85 max 1 Ø 0.45 5.3 max 2.54 2.54 2.54 2.54 TS6Y 6.85 max 2.54 6.85 max slot 0.5 x 0.5 a Ø 0.45 1.3 ± 0.1 b 2.54 2.54 c b 0.3 6.85 max c 5 max Ø 1.8 a 2.54 1 3 7.5 1 ± 0.10 8 max 6.7 max CIRCUIT DIAGRAM a c (1) (3) b (2) cw Tolerance unless otherwise specified ± 0.5 Document Number: 51010 Revision: 26-Jun-07 For technical questions, contact: [email protected] www.vishay.com 27 TS6 Vishay Sfernice Multi-Turn Surface Mount Miniature 1/4" Square Ceremt Trimmers, Fully Sealed ELECTRICAL SPECIFICATIONS Resistive Element Cermet Electrical Travel 13 turns ± 2 10 Ω to 2 MΩ Resistance Range Standard Series E3 and Series Tolerance 1 - 2.2 - 4.7 and 1 - 2 - 5 Standard ± 10 % On request ±5% Power Rating Linear 0.25 W at 85 °C Temperature Coefficient See Standard Resistance Element Data Limiting Element Voltage (Linear Law) 250 V 2 % Rn or 2 Ω Contact Resistance Variation End Resistance (Typical) 1Ω Dielectric Strength (RMS) 1000 V Insulation Resistance 106 MΩ Mechanical Travel Operating Torque (max. Ncm) End Stop Torque Unit Weight (max. g) Wiper (actual travel) POWER RATING CHART 15 turns ± 5 1.5 clutch action 0.5 positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature Range Climatic Category Sealing - 55 °C to + 155 °C 55/125/56 fully sealed container solder immersion IP67 0.25 RATED POWER IN W MECHANICAL SPECIFICATIONS 0.125 0 0 50 85 100 AMBIENT TEMPERATURE IN °C 155 PERFORMANCE CECC 41100 TESTS Climatic Sequence CONDITIONS Phase A dry heat 125 °C Phase B damp heat Phase C cold - 55 °C Phase D damp heat 5 cycles Long Term Damp Heat 56 days 40 °C 93 % RH Rotational Life (Electrical, Mechanical) Load Life Thermal Shock Shock Vibration www.vishay.com 28 TYPICAL VALUES AND DRIFTS ΔRT (%) REQUIREMENTS RT ΔR1-2 (%) R1-2 ΔRT (%) RT ΔR1-2 (%) R1-2 ±2% ±3% ± 0.5 % ±1% ±2% ±3% ± 0.5 % ±1% Dielectric strength: 250 V RMS Insulation resistance: > 100 MΩ Dielectric strength: 1000 V RMS Insulation resistance: > 104 MΩ 200 cycles at rated power ±2% Contact res. variat.: < 3 % Rn ± (2 % + 3 Ω) Contact res. variat.: < 1 % Rn 1000 h at rated power 90’/30’ - ambient temp. 85 °C ±2% Contact res. variat.: < 3 % Rn 5 cycles - 55 °C to + 125 °C ± 1.5 % 50 g at 11m secs 3 successive shocks in 3 directions ±1% 10 - 55 Hz 0.75 mm or 10 g for 6 hours ±1% ΔV1-2 V1-3 ΔV1-2 V1-3 For technical questions, contact: [email protected] ±4% ±1% ±2% Contact res. variat.: < 1 % Rn ±1% ± 0.5 % ±2% ± 0.1 % ± 0.2 % ±2% ± 0.1 % ΔV1-2 < ± 0.2 % V1-3 ΔV1-2 V1-3 <±1% Document Number: 51010 Revision: 26-Jun-07 TS6 Multi-Turn Surface Mount Miniature 1/4" Square Ceremt Trimmers, Fully Sealed MARKING STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. POWER WORKING AT 85 °C VOLTAGE MAX. WIPER CUR. TYPICAL TCR - 55 °C + 125 °C ppm/°C Ω W V mA 10 22 47 100 220 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 2M 0.25 158 2.34 3.43 5 7.42 10.8 15.8 23.4 34.3 50 74.2 108.4 158 234 250 250 250 158 107 73 50 34 23 15.8 10.7 7.3 5 3.37 2.31 1.58 1.97 0.53 0.25 0.125 0.25 0.13 0.06 0.03 Vishay Sfernice Printed: VISHAY trademark, model, style, ohmic value (in Ω, kΩ, MΩ), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. SOLDERING RECOMMENDATION Soldering cycle: 10 s at 220 °C max or with an 40 W iron; 3 s at 350 °C. Soldering is recommended by reflow or vapor phase. ± 100 PACKAGING - X, Y and Z types: on tape and reel (Dia. 330 mm) of 500 pieces: TR - In magazine pack by 50 pieces (Tube) code “TU” ORDERING INFORMATION TS6 MODEL Y STYLE 470 kΩ OHMIC VALUE ± 10 % TOLERANCE TU50 PACKAGING e3 LEAD FINISH TU50: Tube On request - TR500: Tape and reel e3: pure Sn SAP PART NUMBERING GUIDELINES T S MODEL 6 Y 4 STYLE 7 OHMIC VALUE 4 K TOL T 2 PACKAGING CODE 0 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables Document Number: 51010 Revision: 26-Jun-07 For technical questions, contact: [email protected] www.vishay.com 29 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1