VECTRON TFS190C

Version 1.6
File:TFS190C.doc
VI TELEFILTER
07.08.2002
Filter specification
TFS 190 C
1/5
Measurement condition
Ambient temperature TA:
Input power level:
Terminating impedance*:
°C
dBm
610 Ω // -10.4 pF
560 Ω // -10,3 pF
23
0
input
output
Characteristics
Remark:
Reference level for the relative attenuation arel of the TFS 190 C is the minimum of the pass band attenuation amin. The minimum of
the pass band attenuation amin is defined as the insertion loss ae.The nominal frequency fN is fixed at 190,0 MHz without tolerance.
The values of the pass band ripple and the relative attenuation arel are guaranteed in the whole operating temperature range. The
frequency shift of the filter in the operating temperature range is included in the measurement tolerance scheme.
Data
typ. value
Insertion loss
(Reference level)
ae = amin
8,2
Nominal frequency
fN
-
Pass band
PB
Relative attenuation
arel
fN
fN ±
....
2,0
fN -
5,0
fN -
12,0
fN +
fN ± 2
MHz
MHz ... fN ± 2,5 MHz
MHz ... fN - 12
MHz
1
dB
dB
-
tolerance / limit
max
12
dB
190
MHz
fN ±
2
MHz
max
2
dB
max
5
dB
36
dB
min
32
dB
MHz
40
dB
min
36
dB
5,0
MHz ... fN - 190
MHz ... fN + 12
MHz
36
dB
min
32
dB
fN + 12,0
MHz ... fN +270
MHz
45
dB
min
36
dB
°rms
max
4
°rms
max
10
dBm
Phase variation
fN ± 2,5 MHz
1,2
Input power level
-
- 30 °C ... + 85 °C
Operating temperature range
- 55 °C ... + 125 °C
Storage temperature range
Temperature coefficient of frequency
TCf**
-25
ppm/K
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆fc(Hz) = Tcf(ppm/K) x (T - TA) x fCTA (MHz)
generated:
checked / approved:
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 1.6
File:TFS190C.doc
VI TELEFILTER
07.08.2002
Filter specification
TFS 190 C
2/5
Construction, pin configuration and 50 Ω - matching network
(All dimensions in mm)
5.0 SQ
7
+0.15
-0.1
5
190 C
P32
1
3
Date code
Pin 1
Pin 2
Pin 3
Pin 4
Output
Ground
Input
Ground
Pin 5
Pin 6
Pin 7
Pin 8
date code:
M
N
P
...
Input RF return
Ground
Output
Ground
year + week
2000
2001
2002
50 Ohm Test circuit
L1
Input,
50 Ohm
3
1
SAW
C1
C2
7
5
50 Ohm - 50 Ohm
L2
Output,
50 Ohm
L3
2,4,6,8
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 1.6
File:TFS190C.doc
VI TELEFILTER
07.08.2002
Filter specification
TFS 190 C
3/5
Stability Characteristics
After the following tests, the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer
Tape (all dimensions in mm)
W
:
12
± 0,3
Po
:
4
± 0,1
Do
:
1,5
+ 0,1
E
:
1,75 ± 0,1
F
:
G (min) :
P2
:
P1
:
EMBOSSED CARRIER TAPE
Do
Po
P2
E
Ao
5,5 ± 0,05
0,75
2
8
± 0,05
3000
min 300 mm
min 500 mm
min 300 mm
F
D1
CT
W
Bo
± 0,1
G
D1(min) :
1,5
Ao
:
5,3
± 0,1
Bo
:
5,3
± 0,1
CT
:
9,5
± 0,1
P1
COVER TAPE
W 2
Reel (all dimensions in mm):
A
:
W1
:
W2 (max) :
330
12,4 + 0,2
18,4
N (min)
:
50
C
:
13
± 0,2
A
C
N
W 1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 1.6
File:TFS190C.doc
VI TELEFILTER
07.08.2002
Filter specification
TFS 190 C
4/5
Air reflow temperature conditions
1st and 2nd air reflow profile
Name:
Temperature:
Time:
pre-heating periods
150 °C - 170 °C
60 sec. - 90 sec.
main-heating periods
over 200 °C
20 sec. - 25 sec.
peak temperature
255 °C ± 5 °C
Chip-mount air reflow profile
260
240
220
200
temperature / °C
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
10
20
30
40
50
60
70
80
90
100
110
120
130
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
160
161
164
170
180
205
230
255
230
205
180
165
140
120
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Version 1.6
File:TFS190C.doc
VI TELEFILTER
Filter specification
07.08.2002
TFS 190 C
5/5
History
Version
Reason of Changes
Name
Date
1.0
Generation of specification according to customer requirements
Herrler
25.07.2001
1.1
change of pinning according to customer proposal
Steiner
20.09.2001
1.2
new Development specification
Change of relative rejection and phase variation in pass band
Dr. Sabah
08.03.2002
1.3
Add of rejection typical values
Dr. Sabah
15.03.2002
1.4
Add of typical values and change to filter specification
Dr. Sabah
26.04.2002
1.5
correct relative attenuation
Dr. Sabah
29.05.2002
1.6
changing typical values of insertion loss, relative attenuation
and temperature coefficient of frequency
Pfeiffer
07.08.2002
VI TELEFILTER
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.