SPD6557 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 6 AMPS 1300 VOLTS 5 μsec STANDARD RECOVERY RECTIFIER Designer’s Data Sheet SPD65 ___ │ │ │ │ │ │ │ │ └ ___ ___ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type ___ = Axial SMS = Surface Mount Square Tab Family/Voltage 54 = 800 V 55 = 1000 V 56 = 1200 V 57 = 1300 V FEATURES: • • • • • • • • • • Standard Recovery: 5 μsec maximum PIV up to 1500 Volts Low Reverse Leakage Current Hermetically Sealed Single Chip Construction High Voltage Replacement for 1N5553 &1N5554 Low Thermal Resistance Available with 0.040” diameter leads 2/ TX, TXV, and Space Level Screening Available Fast Recovery Versions Available. Contact Factory. • For higher voltages-See SSDI p/n SDR6W MAXIMUM RATINGS Symbol Value Units VRRM VRWM VR 1300 1200 1000 800 Volts IO 6 Amps IFSM 150 Amps Operating and Storage Temperature TOP & Tstg -65 to +175 Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount RθJL RθJE 8 4 Peak Repetitive Reverse Voltage and DC Blocking Voltage SPD6557 SPD6556 SPD6555 SPD6554 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, allow junction to reach equilibrium between pulses, TA=25oC) 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RC0086E o C o C/W Surface Mount Square Tab (SMS) DOC SPD6557 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 6 Amps, TA = 25oC, 300μsec Pulse) TA = 25oC TA = -55oC Reverse Leakage Current (At Rated VR, 300μsec pulse minimum) TA = 25oC TA = 100oC Breakdown Voltage (IR = 50 μA, TA = 25oC) Junction Capacitance (VR = 10 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) Case Outline: (Axial) Case Outline: (SMS) SPD6557 SPD6556 SPD6555 SPD6554 Symbol Min Max Unit VF1 VF2 –– –– 1.15 1.30 Volts Volts 5.0 50 μA μA VBR 1300 1200 1000 800 –– –– –– –– Volts CJ –– 50 pF trr –– 5 μs –– –– IR1 IR2 DIM MIN MAX A B C D –– 0.210” 0.047” 1.00” 0.215” 0.300” 0.053” –– DIM MIN MAX A B C D 0.195” 0.260” 0.020” 0.002” 0.230” 0.350” 0.030” –– Note: Dimensions prior to soldering. NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0086E DOC