SDR2HF1.8 and SMS SDR2HF2.0 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 2 AMPS 1800 - 2000 VOLTS 35 nsec HYPER FAST RECOVERY RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • • • • Hyper Fast Recovery: 35 nsec maximum PIV to 2400 Volts Low Reverse Leakage Current Hermetically Sealed Low Thermal Resistance Low trr Change at High Temperature (typical: trr = 55ns @ 100°C) TX, TXV, and Space Level Screening Available. Contact Factory. Fast Recovery Versions Available. Contact Factory. Single Junction Construction Replaces 1N6512 and 1N6513 in many applications. Axial MAXIMUM RATINGS Surface Mount Square Tab (SMS) Symbol Value Units VRRM VRWM VR 1800 2000 Volts IO 2 Amps Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, Allow Junction to Reach Equilibrium between Pulses, TA=25oC, L=.125”) IFSM 16 Amps Operating Storage TOP Tstg -65 to +175 -65 to +200 RθJL RθJE 6 4 Reverse Voltage SDR2HF1.8 & SMS SDR2HF2.0 & SMS Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC, L=.125”) Temperature Range Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0096B o C o C/W DOC SDR2HF1.8 and SMS SDR2HF2.0 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Min Max Unit SDR2HF1.8 & SMS SDR2HF2.0 & SMS BVR 1800 2000 –– –– Volts Instantaneous Forward Voltage Drop (TA = 25oC, Pulse) IF1 =1 A IF2 =2 A VF1 VF2 –– –– 8.0 11.0 Instantaneous Forward Voltage Drop (TA = -55oC, Pulse) IF3 =1 A IF4 =2 A VF3 VF4 –– –– 8.0 11.0 TA = 25oC TA = 100oC IR1 IR2 –– –– 10 250 µA µA CJ –– 20 pF trr –– 35 ns DIM MIN MAX A B C D –– 0.240” 0.045” 1.00” 0.170” 0.270” 0.051” –– DIM MIN MAX A B C D 0.195” 0.290” 0.020” 0.002” 0.205” 0.330” 0.030” –– Breakdown Voltage (IR = 50 µA, TA = 25oC, Pulse) Reverse Leakage Current (VR =85% rated VR, Pulse) Junction Capacitance (VR = 50 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF =500 mA, IR =1 A, IRR =250 mA, TA = 25oC) Case Outline: (Axial) Case Outline: (SMS) Volts Volts Volts Volts NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0096B DOC