05105 SMLC6.5C-2 thru SMLC12C-2 Only One Name Means ProTek’Tion™ LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ T1/E1 ✔ RS-422, RS-423 & RS-485 ✔ SDH/SONET, ATM Equipment & Systems ✔ Industrial Controls & Monitoring ✔ Cable Modem Intra-Building Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 95A, L4(Line-Gnd) & 48A, L4(Line-Line) & 83A, L2(Power) SO-16 FEATURES ✔ 3,600 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ 600 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ 100A (2/10µs) per Bellcore GR-1089 (Intra-Building) ✔ Bidirectional Configuration ✔ High Surge Capability: 80A (10/1000µs) ✔ Available in 2 Voltages: 6.5V & 12V ✔ Protects Two (2) Bidirectional Lines ✔ LOW CAPACITANCE: < 30pF per LINE PAIR ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-16 Package Weight 0.15 grams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05105.R4 3/05 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 www.protekdevices.com SMLC6.5C-2 thru SMLC12C-2 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) PPP 3,600 Watts Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 600 Watts TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER SMLC6.5C-2 SMLC12C-2 MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @ VWM ID µA MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IPP = 10A VC VOLTS VWM VOLTS @ 1mA V(BR) VOLTS 6.5 12.0 7.2 13.3 300 2 12.4 19.9 30 30 FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10 600W 10/1000µs Waveform 1 0.1 0.1 05105.R4 3/05 1 10 100 1,000 td - Pulse Duration - µs 10,000 100,000 @0V, 1MHz C pF FIGURE 2 PULSE WAVE FORM 100 IPP - Peak Pulse Current - % of IPP 100 PPP - Peak Pulse Power - kW RATED STAND-OFF VOLTAGE TEST WAVEFORM PARAMETERS tf = 10µs td = 1,000µs tf Peak Value IPP td = t I /2 PP 50 e-t 0 0 1 2 3 t - Time - µs 2 www.protekdevices.com SMLC6.5C-2 thru SMLC12C-2 GRAPHS FIGURE 3 POWER DERATING CURVE FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR SMLC6.5C-2 100 35 Peak Pulse Power 10/1000µs 5 Volts per Division % Of Rated Power 80 60 40 25 15 5 20 -5 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C ESD Test Pulse: 5 kilovolt, 1/30ns (waveform) 150 VC - Clamping Voltage - Volts FIGURE 5 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR SMLC6.5C-2 16 12 8 4 0 0 10 20 30 IPP - Peak Pulse Current - Amps FIGURE 6 INSERTION LOSS - SMLC6.5C-2 FIGURE 7 RETURN LOSS - SMLC6.5C-2 20 db 10 db per Division 10 db per Division 20 db Ref 0 db -20 db Ref 0 db -20 db -50 db -50 db 100 MHz per Division 100 MHz per Division 05105.R4 3/05 40 3 www.protekdevices.com SMLC6.5C-2 thru SMLC12C-2 APPLICATION NOTE The SMLCxxC-2 Series are low capacitance, bidirectional TVS arrays that are designed to protect I/O or high speed data lines from the damaging effects of ESD or EFT. This product series has a surge capability of 600 Watts PPP per line for an 10/1000µs waveform and ESD protection > 40kV. BIDIRECTIONAL DIFFERENTIAL-MODE CONFIGURATION(Figure 1) Ideal for use multimode transceiver I/O lines, telecommunications and wireless circuits, the SMLCxxC-2 Series provides up to two (2) line pairs of protection in a differential-mode T1/E1 application as depicted in Figure 1. Circuit connectivity is as follows: ✔ Line 1 is connected to Pins 1, ✔ Line 2 is connected to Pins 3, ✔ Line 3 is connected to Pins 5, ✔ Line 4 is connected to Pins 7, 2, 4, 6, 8, 15 & 16. 13 & 14. 11, & 12. 9 & 10. Figure 1. Differential-Mode Protection For T1/E1 Applications CIRCUIT BOARD LAYOUT RECOMMENDATIONS Circuit board layout is critical for Electromagnetic Compatibility (EMC) protection. The following guidelines are recommended: ✔ ✔ ✔ The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. 1 The path length between the TVS device and the protected line should be minimized. All conductive loops including power and ground loops should be minimized. ✔ The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. ✔ Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05105.R4 3/05 4 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 www.protekdevices.com SMLC6.5C-2 thru SMLC12C-2 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 -A- 9 16 -B- P 1 0.010” (0.25 MM) M B M 8 PL 8 PACKAGE DIMENSIONS DIM G R X 45º C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M F D M T B S A S 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.393 10.00 0.386 4.00 0.150 0.157 0.068 1.75 0.054 0.49 0.014 0.019 1.25 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.009 0.25 0.004 6.20 0.229 0.244 0.50 0.010 0.019 NOTES MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.160” ± 0.005” J A B C D F G J K P R MILLIMETERS MIN MAX 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.245” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., SMLC6.5C-2-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., SMLC6.5C-2-T13. 4. Suffix- LF = Lead-Free, Pure-Tin Plating, i.e., SMLC6.5C-2-LF-T7. 5. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06007 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05105.R4 3/05 5 www.protekdevices.com