ONSEMI MUR220G

MUR220
Preferred Device
SWITCHMODEt
Power Rectifier
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
Features
•
•
•
•
•
•
http://onsemi.com
Ultrafast 25 Nanosecond Recovery Times
175°C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
These are Pb−Free Devices*
ULTRAFAST RECTIFIER
2.0 AMPERES − 200 VOLTS
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
AXIAL LEAD
CASE 059−10
PLASTIC
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
•
260°C Max. for 10 Seconds
Polarity: Cathode Indicated by Polarity Band
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200
−
V
Average Rectified Forward Current (Note 1)
(Square Wave Mounting Method #3 Per Note 3)
IF(AV)
2.0 @
TA = 90°C
A
Non−Repetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
IFSM
35
A
Operating Junction Temperature and Storage
Temperature Range
TJ, Tstg
− 65 to
+175
°C
Symbol
Max
Unit
RqJA
(Note 3)
°C/W
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Ambient
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
July, 2006 − Rev. 7
1
MARKING DIAGRAM
A
MUR220
YYWW G
G
A
= Assembly Location
MUR220 = Device Code
YY
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Package
Shipping †
MUR220
Axial Lead**
1000 Units / Bulk
MUR220G
Axial Lead**
1000 Units / Bulk
MUR220RL
Axial Lead**
5000 / Tape & Reel
MUR220RLG
Axial Lead**
5000 / Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
**This package is inherently Pb−Free.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MUR220/D
MUR220
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Maximum Instantaneous Forward Voltage (Note 2)
(IF = 2.0 Amp, TJ = 150°C)
(IF = 2.0 Amp, TJ = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TJ = 150°C)
(Rated dc Voltage, TJ = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 Amp, di/dt = 50 Amp/ms)
(IF = 0.5 Amp, IR = 1.0 Amp, IREC = 0.25 A)
trr
Maximum Forward Recovery Time
(IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V)
tfr
Value
Unit
V
0.75
0.95
mA
50
2.0
ns
35
25
25
ns
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
10
I , INSTANTANEOUS FORWARD CURRENT (AMPS)
F
I F , INSTANTANEOUS FORWARD CURRENT (AMPS)
10
VF @ 150°C
1.0
VF @ 150°C
1.0
125°C
125°C
75°C
75°C
25°C
25°C
0.1
0.1
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
VF, INSTANTANEOUS VOLTAGE (VOLTS)
VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Maximum Forward Voltage
Figure 2. Typical Forward Voltage
http://onsemi.com
2
1.2
1.3
MUR220
10
100
IR @ 150°C
IR, REVERSE CURRENT (m A)
IR, REVERSE CURRENT (m A)
IR @ 150°C
125°C
10
75°C
1.0
25°C
0.1
25°C
0.01
40
60
80
100
120
140
160
180
200
20
60
80
100
120
140
160
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 4. Typical Reverse Current
5.0
4.0
3.0
dc
2.0
SQUARE WAVE
1.0
50
100
150
200
SQUARE WAVE
dc
1.5
1.0
0.5
0
0
0.5
1.0
1.5
2.0
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 5. Current Derating
Figure 6. Power Dissipation
50
TJ = 25°C
30
20
10
7.0
5.0
0
10
20
30
40
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Capacitance
http://onsemi.com
3
200
180
2.0
TA, AMBIENT TEMPERATURE (°C)
C, CAPACITANCE (pF)
0
40
Figure 3. Maximum Reverse Current
PF(AV), AVERAGE POWER DISSIPATION (WATTS)
20
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
75°C
0.1
0.001
0.01
0
125°C
1.0
50
2.5
MUR220
NOTE 3. − AMBIENT MOUNTING DATA
Data shown for Thermal Resistance,
Junction−to−Ambient (RqJA) for the mountings
shown is to be used as typical guideline values for
preliminary engineering or in case the tie point
temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR
Lead
1/8
52
67
Mounting
Method
1
2
RqJA
3
Length, L
1/4
1/2
65
72
80
87
Units
°C/W
°C/W
50
°C/W
MOUNTING METHOD 1
ÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ
L
L
MOUNTING METHOD 2
ÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉ
L
L
Vector Pin Mounting
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
MOUNTING METHOD 3
L = 3/8 ″
Board Ground Plane
P.C. Board with
1−1/2 ″ X 1−1/2″ Copper Surface
http://onsemi.com
4
MUR220
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59−10
ISSUE U
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
B
K
D
DIM
A
B
D
F
K
F
A
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
INCHES
MIN
MAX
0.161 0.205
0.079 0.106
0.028 0.034
−−− 0.050
1.000
−−−
MILLIMETERS
MIN
MAX
4.10
5.20
2.00
2.70
0.71
0.86
−−−
1.27
25.40
−−−
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
F
K
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MUR220/D