ONSEMI MUR2100E

MUR2100E
Preferred Device
SWITCHMODE
Power Rectifier
Ultrafast “E” Series with High Reverse
Energy Capability
http://onsemi.com
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state−of−the−art devices have the
following features:
ULTRAFAST
RECTIFIER
2 AMPS
1000 VOLTS
• 20 mjoules Avalanche Energy Guaranteed
• Excellent Protection Against Voltage Transients in Switching
•
•
•
•
•
•
Inductive Load Circuits
Ultrafast 75 Nanosecond Recovery Time
175°C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
These are Pb−Free Devices
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
Polarity: Cathode Indicated by Polarity Band
AXIAL LEAD
PLASTIC
CASE 059
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
1000
V
Average Rectified Forward Current
(Note 1)
IF(AV)
2.0 @
TA = 35°C
A
Non-Repetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
IFSM
35
A
TJ, Tstg
−65 to
+175
°C
Symbol
Value
Unit
RJA
(Note 1)
°C/W
Operating Junction Temperature and
Storage Temperature Range
MUR
2100E
MUR2100E = Device Code
THERMAL CHARACTERISTICS
Characteristic
Maximum Thermal Resistance, Junction−to−Ambient
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
 Semiconductor Components Industries, LLC, 2004
July, 2004 − Rev. 4
MARKING DIAGRAM
1
ORDERING INFORMATION
Device
Package
Shipping†
MUR2100E
Axial Lead
(Pb−Free)
1000 Units/Bag
MUR2100ERL
Axial Lead
(Pb−Free)
5000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MUR2100E/D
MUR2100E
ELECTRICAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
Maximum Instantaneous Forward Voltage (Note 2)
(IF = 2.0 A, TJ = 150°C)
(IF = 2.0 A, TJ = 25°C)
VF
V
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TJ = 100°C)
(Rated dc Voltage, TJ = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/s)
(IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A)
trr
Maximum Forward Recovery Time
(IF = 1.0 A, di/dt = 100 A/s, IREC to 1.0 V)
tfr
75
ns
WAVAL
10
mJ
VF @ 175°C
100°C
1.75
2.20
A
600
10
ns
100
75
Controlled Avalanche Energy (See Test Circuit in Figure 6)
2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
10
IF, INSTANTANEOUS FORWARD
CURRENT (A)
IF, INSTANTANEOUS FORWARD
CURRENT (A)
10
VF @ 175°C
150°C
1.0
100°C
25°C
0.1
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
150°C
1.0
25°C
0.1
0.0
0.5
1.0
1.5
2.0
2.5
3.0
VF, INSTANTANEOUS VOLTAGE (V)
VF, INSTANTANEOUS VOLTAGE (V)
Figure 1. Maximum Forward Voltage
Figure 2. Typical Forward Voltage
http://onsemi.com
2
3.5
MUR2100E
1.0E−01
1.0E−01
IR, REVERSE CURRENT (A)
IR, REVERSE CURRENT (A)
VR @ 175°C
1.0E−02
1.0E−03 150°C
100°C
1.0E−04
1.0E−05
25°C
1.0E−06
1.0E−07
1.0E−02
1.0E−03
VR @ 175°C
1.0E−04
150°C
1.0E−05
100°C
1.0E−06
1.0E−07
25°C
1.0E−08
1.0E−08
0
200
400
600
800
1000
0
3.0
2.5
DC
1.5
SQUARE WAVE
0.5
0
50
100
150
200
PF(AV), AVERAGE POWER DISSIPATION (A)
3.5
2
SQUARE WAVE
DC
1
0
0
0.5
1.5
2
Figure 6. Power Dissipation
10
1
40
1
IF(AV), AVERAGE FORWARD CURRENT (A)
100
20
1000
3
Figure 5. Current Derating
0
800
4
TA, AMBIENT TEMPERATURE (°C)
C, CAPACITANCE (pF)
IF(AV), AVERAGE FORWARD CURRENT (A)
4.0
0
600
Figure 4. Typical Reverse Current
Figure 3. Maximum Reverse Current
1.0
400
VR, REVERSE VOLTAGE (V)
VR, REVERSE VOLTAGE (V)
2.0
200
60
80
100 120 140 160 180 200
VR, REVERSE VOLTAGE (V)
Figure 7. Typical Capacitance
http://onsemi.com
3
2.5
MUR2100E
NOTE 1 — AMBIENT MOUNTING DATA
Data shown for thermal resistance junction to
ambient (RJA) for the mountings shown is to be
used as typical guideline values for preliminary
engineering or in case the tie point temperature
cannot be measured.
TYPICAL VALUES FOR RJA IN STILL AIR
Mounting
Method
1
2
RJA
Lead Length, L
1/4
1/2
1/8
52
65
72
67
80
87
Units
°C/W
°C/W
50
°C/W
3
MOUNTING METHOD 1
L
L
ÉÉÉÉÉÉÉÉÉÉÉ
MOUNTING METHOD 2
ÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉ
L
L
Vector Pin Mounting
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
MOUNTING METHOD 3
L = 3/8 ″
Board Ground Plane
P.C. Board with
1−1/2 ″ X 1−1/2 ″ Copper Surface
http://onsemi.com
4
MUR2100E
PACKAGE DIMENSIONS
AXIAL LEAD (DO−41)
CASE 59−10
ISSUE S
B
K
D
F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 59−04 OBSOLETE, NEW STANDARD 59−09.
4. 59−03 OBSOLETE, NEW STANDARD 59−10.
5. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
6. POLARITY DENOTED BY CATHODE BAND.
7. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
DIM
A
B
D
F
K
A
F
INCHES
MIN
MAX
0.161
0.205
0.079
0.106
0.028
0.034
−−−
0.050
1.000
−−−
K
http://onsemi.com
5
MILLIMETERS
MIN
MAX
4.10
5.20
2.00
2.70
0.71
0.86
−−−
1.27
25.40
−−−
MUR2100E
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MUR2100E/D