MA4EX600H-1225 Silicon MMIC Double Balanced HMIC Mixer 4200 - 6000 MHz Features n n n n n n V 1.00 Package Outline (Topview) 5.8 dB Typical Conversion Loss at 5000 MHz +13 to +17 dBm LO Drive HMIC IC Process Silicon High Barrier Schottky Barrier Diodes DC – 2000 Mhz IF Bandwidth Low Cost Miniature Plastic Package 3 2 1 Description M/A-COM's MA4EX600H-1225 is a silicon monolithic 4.2 – 6.0 GHz double balanced mixer in a low cost miniature surface mount SOT 25 package. The die uses M/A-COM’s unique HMIC silicon/glass process to realize low loss passive elements while retaining the advantages of high barrier silicon Schottky barrier diodes. 4 5 PIN Configuration Applications These mixers are well suited for high volume WLL and WLAN applications where small size and repeatability are required. Typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. PIN Function PIN Function 1 RF 4 GND 2 GND 5 IF 3 LO Absolute Maximum Ratings1 Parameter Maximum Ratings Operating Temperature -40 °C to +85 °C Storage Temperature -65 °C to +150 °C Incident LO Power +20 dBm C.W. Incident RF Power +20 dBm C.W. 1. Exceeding these limits may cause permanent damage. 1 Silicon Double Balanced HMIC Mixer 4200—6000 MHz MA4EX600H-1225 V 1.00 Electrical Specifications: @ + 25 °C Parameter Conversion Loss L - R Isolation L - I Isolation R - I Isolation RF VSWR IF VSWR Input IP3 Input 1 dB Compression IF 1 dB Bandwidth Frequency Range Test Conditions 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF = -10 dBm, IF = 60 MHz 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF Level = -10 dBm 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF Level = -10 dBm 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF Level = -10 dBm 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF Level = -10 dBm 1000 MHz LO Drive = +15 dBm 50 - 2000 MHz RF Level = -10 dBm 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF = -10 dBm, IF = 60 MHz 5000 MHz LO Drive = +15 dBm 4.2 - 6.0 GHz RF = -10 dBm, IF = 60 MHz DC - 2000 MHz LO = 5000 MHz @ +15 dBm Units dB dB Min. Typ. Max. 5.8 6.5 6.5 8.0 28 25 dB 26 24 dB 13 13 Ratio 1.25 1.9 Ratio 1.9 1.8 dBm 16.7 16.0 dBm 6.9 8.0 MHz 02000 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 3 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Silicon Double Balanced HMIC Mixer 4200—6000 MHz MA4EX600H-1225 V 1.00 Typical Performance Curves (LO Drive = +15 dBm, RF = -10 dBm, IF = 60 MHz) Conversion Loss Isolation 0 -3 -5 -4 LOSS (DB) PLO = 17dBm ISOLATION(dB) -10 -5 PLO = 15dBm -6 PLO = 13dBm R-I -15 -20 L-I -7 -25 -8 -30 L-R -35 -9 4200 4200 4450 4700 4950 5200 5450 5700 4400 4600 4800 5000 5200 5400 5600 5800 6000 5950 FREQUENCY (MHz) FREQUENCY (MHz) VSWR Input IP3 & 1dB Compression Point IF Frequency (MHz) 0 200 400 600 800 1000 1200 1400 1600 1800 2000 3.0 30 2.5 25 PLO = 17dBm PLO = 15dBm I Port 20 IP3 (dBm) 1.5 R Port 15 10 0.5 5 0.0 4200 PLO = 13dBm 1db Compression 1.0 0 4400 4600 4800 5000 5200 5400 5600 5800 6000 RF Frequency (MHz) 42 00 43 00 44 00 45 00 46 00 47 00 48 00 49 00 50 00 51 00 52 00 53 00 54 00 55 00 56 00 57 00 58 00 59 00 VSWR 2.0 FREQUENCY (MHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 3 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Silicon Double Balanced HMIC Mixer 4200—6000 MHz MA4EX600H-1225 V 1.00 Case Style—SOT-25 Schematic IF RF Dimensions Ordering Information Part Number MA4EX600H-1225T LO Tape and Reel Millimeters Inches Package Dim A Min. .106 Max. .122 Min. 2.70 Max. 3.10 B .100 .118 2.54 3.00 C — .051 — 1.30 D .063 REF. 1.60 REF. E .032 .043 .80 1.10 F .014 .020 .35 .50 G .003 — .08 — H .000 .006 .00 .15 J .018 REF. .45 REF. Notes: 1. Leads Coplanarity should be 0.003 (0.08) max. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. n North America: Tel. (800) 366-2266 4 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020