MA4EXP950H-1277 Silicon Double Balanced HMIC Mixer 850 - 1050 MHz Features V 1.00 3mm, FQFP-N, 16 Lead n +35 dBm Typical IIP3 n 8.3 dB Typical Conversion Loss n +15 to +19 dBm LO Drive n Fully Balanced Passive Mixer n NO Matching required n Low Cost Miniature Plastic MLP Package Description M/A-COM’s MA4EXP950H-1277 is a silicon monolithic 850 - 1050 MHz, high barrier, double balanced mixer in a low cost miniature surface mount FQFP-N 3mm, 16 lead plastic package. The die uses M/A-COM’s unique HMIC silicon/glass process to realize low loss passive elements while retaining the advantages of high barrier silicon schottky barrier diodes. These mixers are well suited for GSM and CDMA Cellular basestation infrastructure applications where small size and high performance is required. Typical applications include frequency conversion, modulation and demodulation in wireless receivers and transmitters. Electrical Specifications1: TA = 25°C, Z0 = 50 Ohms Parameter Test Conditions Frequency Units Min Typ Max Conversion Loss LO Drive = +19 dBm RF = -10 dBm, IF = 60 MHz 850 MHz 850 - 1050 MHz dB dB — — 8.1 8.3 9.5 9.5 L - R Isolation LO Drive = +17 dBm RF Level = -10 dBm 850 MHz 850 - 1050 MHz dB dB — — 58.0 55.0 — — L - I Isolation LO Drive = +17 dBm RF Level = -10 dBm 850 MHz 850 - 1050 MHz dB dB — — 49.0 44.0 — — R - I Isolation LO Drive = +17 dBm RF Level = -10 dBm 850 MHz 850 - 1050 MHz dB dB — — 30.0 28.0 — — RF VSWR LO Drive = +17 dBm RF Level = -10 dBm 850 MHz 850 - 1050 MHz Ratio Ratio — — 1.50:1 2.20:1 — — IF VSWR LO Drive = +17 dBm RF Level = -10 dBm DC - 500 MHz Ratio — 1.70:1 — LO VSWR LO Drive = +17 dBm RF Level = -10 dBm 850 MHz 850 - 1050 MHz Ratio Ratio — — 2.1:1 1.7:1 — — Input IP3 LO Drive = +19 dBm RF = -10 dBm, IF = 60 MHz 850 MHz 850 - 1050 MHz dBm dBm — — 32 33 — — Input 1 dB Compression LO Drive = +17 dBm IF = 60 MHz 850 MHz 850 - 1050 MHz dBm dBm — — 12.1 12.7 — — IF 1 dB Bandwidth LO = 850 MHz @ +17 dBm DC - 200 MHz MHz 0 — 200 Silicon Double Balance HMIC Mixer, 850 - 1050 MHz MA4EXP950H-1277 V 1.00 Absolute Maximum Ratings 1 Pin Configuration Pin No. Function Pin No. Function Parameter Absolute Maximum 1 N/C 9 N/C Incident LO Power +20 dBm 2 N/C 10 RF Incident RF Power +20 dBm 3 LO 11 N/C Operating Temperature -40°C to +85°C 4 N/C 12 N/C Storage Temperature -65°C to +150°C 5 N/C 13 N/C 6 N/C 14 IF 7 N/C 15 N/C 8 N/C 16 N/C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. Schematic IF RF LO Typical Performance Curves (LO Drive = +17 dBm, RF = -10 dBm, IF = 60 MHz) Conversion Loss PLO = 19 dBm R-I -6.0 0 -6.5 -10 -7.0 Isolation (dB) Conversion Loss (dB) PLO = 17 dBm Isolation -7.5 -8.0 -8.5 -9.0 L-R -20 -30 -40 -50 -60 -9.5 -10.0 850 L-I -70 900 950 1000 1050 Frequency (MHz) M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. 850 900 950 1000 1050 Frequency (MHz) 2 n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Silicon Double Balance HMIC Mixer, 850 - 1050 MHz MA4EXP950H-1277 V 1.00 Typical Performance Curves (LO Drive = +17 dBm, RF = -10 dBm, IF = 60 MHz) RF VSWR IF VSWR L-Port 3.5 3.0 3.0 IF VSWR VSWR R -Port 3.5 2.5 2.0 1.5 2.5 2.0 1.5 1.0 1.0 850 875 900 925 950 975 1000 1025 1050 50 Frequency (MHz) 150 200 250 300 350 400 450 500 Frequency (MHz) Input IP3 and 1 dB Compression Point PLO=17dBm 100 PLO=19dBm OUTLINE DRAWING Typical 1dB Compression 40 35 IP3 (dBm) 30 25 20 15 10 5 0 850 900 950 1000 1050 Frequency (MHz) Ordering Information Part Number Package MA4EXP950H-1277 Bulk Packaging MA4EXP950H-1277TR Tape and Reel (1K Reel) Note: Reference Application Note M513 for reel size information. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. 3 n North America: Tel. (800) 366-2266 n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020