MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MBR5200 Features • • • • 5 Amp Schottky Barrier Rectifier 200 Volts Low Switching Noise Low Forward Voltage Drop High Current Capability High Surge Current Capability Maximum Ratings • • DO-201AD Operating Temperature: -50°C to +150°C Storage Temperature: -50°C to +150°C MCC Catalog Number Device Marking MBR5200 MBR5200 Maximum Recurrent Peak Reverse Voltage 200V Maximum RMS Voltage Maximum DC Blocking Voltage 140V 200V D A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage IF(AV) 5.0A TA = 85°C IFSM 120A 8.3ms, half sine VF 1.0V IFM = 5.0A; TA = 25°C* IR 0.1mA TA = 25°C D C DIMENSIONS DIM A B C D INCHES MIN .287 .189 .048 1.000 MAX .374 .208 .052 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE *Pulse test: Pulse width 300 µsec, Duty cycle 2% www.mccsemi.com Revision: 3 2003/04/30 MCC MBR5200 Micro Commercial Components Figure 1 Typical Forward Characteristics Figure 2 Typical Reverse Characteristics 20 10 10 6 6 4 4 2 2 Amps TM 1 .6 1 .4 .6 .2 .4 TJ=25°C µAmps .1 .2 .06 25°C .1 .04 .06 .02 .04 .01 .02 .006 .01 .2 .4 .6 .8 1.0 .00 4 1.2 Volts .002 Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts .001 20 50 75 100 125 150 175 Volts Instantaneous Reverse Leakage Current - MicroAmperes versus Percent Of Rated Peak Reverse Voltage - Volts Figure 3 Forward Derating Curve 6 Figure 4 Maximum Non-Repetitive Forward Surge Current 5 150 4 125 3 100 Amps 75 2 Amps 50 1 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 50 75 100 125 150 175 25 5 0 1 2 4 °C Average Forward Rectified Current - Amperesversus Ambient Temperature - °C 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles www.mccsemi.com Revision: 3 2003/04/30