SDR30U080J thru SDR30U120J and Solid State Devices, Inc. SDR40U080M thru SDR40U120M 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 30/40 AMP Ultra Fast Recovery Rectifier Part Number / Ordering Information 1/ SDR55 __ __ __ __ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ └ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level Package Type J = TO-257 M = TO-254 Voltage/Family 80 = 800V 90 = 900V 100 = 1000V 110= 1100V 120 = 1200V Recovery Time UF = Ultra Fast 800 - 1200 Volts 50 nsec Features: • • • • • • • • • Ultra Fast Recovery: 40 nsec typical High Surge Rating Low Reverse Leakage Current Low Forward Voltage Drop Low Junction Capacitance Hermetically Sealed Package Gold Eutectic Die Attach available Ultrasonic Aluminum Wire Bonds Ceramic Seals for improved hermeticity available • TX, TXV, Space Level Screening Available Consult Factory.2/ Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SDR30U080/SDR40U080 SDR30U090/SDR40U090 SDR30U100/SDR40U100 SDR30U110/SDR40U110 SDR30U120/SDR40U120 Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC)3/ TO-257 TO-254 Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to 3/ Reach Equilibrium Between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to End Tab3/ Symbol Value Units VRRM 800 900 1000 1100 1200 Volts Io 30 40 Amps IFSM 250 Amps Top & Tstg -65 to +200 ºC RθJE 1.25 ºC/W VRWM VR TO-254 (M) TO-257 (J) 1/ For ordering information, price, operating curves, and availability - Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Pins 2 & 3 connected. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0143A DOC SDR30U080J thru SDR30U120J Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com and SDR40U080M thru SDR40U120M Electrical Characteristics Instantaneous Forward Voltage Drop (TA = 25ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop (TA = -55ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop (TA = 125ºC, 300 μsec pulse) Symbol IF = 5Adc IF = 10Adc IF = 20Adc IF = 30Adc IF = 50Adc IF = 5Adc IF = 10Adc IF = 20Adc IF = 30Adc IF = 50Adc IF = 5Adc IF = 10Adc IF = 20Adc IF = 30Adc IF = 50Adc Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Typ Max 1.65 1.73 1.85 1.92 2.1 1.7 1.75 1.85 1.92 2.05 1.12 1.3 1.52 1.65 1.88 -1.9 2.1 2.2 2.5 -1.95 2.1 2.2 2.5 -1.6 1.8 2.0 2.35 IR1 20 100 μA IR2 1.5 5 15 -20 -- mA CJ 50 45 -75 pF trr1 trr2 trr3 IRM3 trr4 IRM4 35 100 50 3.7 110 6 50 ------ nsec nsec nsec A nsec A VF1 VF2 VF3 Reverse Leakage Current (Rated VR, TA = 100ºC, 300 μsec pulse minimum) (Rated VR, TA = 125ºC, 300 μsec pulse minimum) (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Junction Capacitance (VR = 5 Vdc, TA = 25ºC, f = 1MHz) (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A) (IF = 500 mA, IR = 1A, IRR = 0.25A) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) (IF = 10 A, dIF /dt = 100A/us) Case Outline: TO-254 Pin1: Cathode Pin2: Anode Pin3: Anode TA = 25ºC TA = 100ºC TA = 25ºC TA = 25ºC TA = 100ºC TA = 100ºC Case Outline: TO-257 Units Volts Volts Volts Pin1: Cathode Pin2: Anode Pin3: Anode Note 1: Pin 2&3 connected together NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0143A DOC