SDR623CT/CA thru SDR626CT/CA ` Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 1/ 40A 35nsec 300-600 V 6 Pin TO-259 Common Anode & Common Cathode Hyper Fast Centertap Rectifier Features: • • • • • • • • Hyper Fast Recovery: 35nsec Maximum 3/ Isolated Low Profile Package Low Reverse Leakage Current Eutectic Die Attach Available Hermetically Sealed Package Dual Centertap: 1 Common Anode, 1 Common Cathode Optional Bent Leads Available TX, TXV, and S-Level Screening Available 2/ Maximum Ratings 6/ Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current 5/ (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case 4/ Junction to Case 5/ SDR623CT/CA SDR624CT/CA SDR625CT/CA SDR626CT/CA Total Symbol Value Units VRRM VRWM VR 300 400 500 600 Volts Io 80 Amps IFSM 200 Amps TOP & TSTG -65 to +200 ºC Rθ JC 0.65 1.9 ºC/W Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, rec. to 0.25 Amp. 4/ All Legs Tied Together. 5/ Each Leg. 6/ Ratings at 25°C (Unless Otherwise Specified). NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0231G DOC SDR623CT/CA thru SDR626CT/CA Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Symbol Max Units Instantaneous Forward Voltage Drop (IF = 10Adc, Pulse) (IF = 20Adc, Pulse) Instantaneous Forward Voltage Drop (IF = 10Adc, Pulse) TA = 25 ºC TA = 25 ºC VF1 VF2 1.45 1.65 VDC TA = 100 ºC TA = -55 ºC VF3 VF4 1.35 1.55 VDC Reverse Leakage Current (100% of rated VR, Pulse) TA = 25 ºC TA = 100 ºC IR1 IR2 50 5 µA mΑ Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC) trr 35 nsec Junction Capacitance (VR = 10VDC, T A = 25ºC, f = 1MHz) CJ 150 pF PIN ASSIGNMENT Configuration Pin 1 Pin 2 Pin 3 Common Cathode Anode 1 Cathode Anode 2 Configuration Pin 4 Pin 5 Pin 6 Common Anode Cathode 1 Anode Cathode 2 TO-259-6 Outline: Tolerances Unless Specified- .XX ± .020” .XXX ± .010” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0231G DOC