KW1-3001 SERIES LED Numeric Display Single Digit (3.00") DESCRIPTION: PACKAGE DIMENSIONS The KW1-3001 series is large single digit display in 3.00 inch (76.00mm) height with right comma designed for accurate readable displays need to be viewed over a distance. This series is suitable for use in instruments, digital readout displays. All devices are available as either common anode or common cathode. 46.00 o 6.00 10.0 A 110.00 76.00(3.0") F B G E C D o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC DP + PIN 1 COMMA 13.00 70.00 φ0.80 80.00 5.08*4=20.32 NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. INTERNAL CIRCUIT DIAGRAM 8 8 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A B 7 C 6 D 5 E 2 1 F COM G DP -MA 10 9 4 3 A B 7 C 6 D 5 E 2 1 F 10 COM G DP -MA 9 4 3 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Wave C.C or C.A Absolute Maximum Ratings Electro-optical Data(at 10mA) ∆λ Pd If 635 45 100 50 100 10.5 11.5 15.0 10-20 4000 9000 660 20 100 50 100 10.0 11.0 14.0 10-20 14000 50000 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 Super Green 570 30 100 50 100 11.0 12.0 15.0 10-20 4000 8500 GaAsP/GaP Yellow 585 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 KW1-3001C3 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 10.5 11.5 15.0 10-20 4000 9000 KW1-3001CS GaAlAs Super Red 660 20 100 50 100 10.0 11.0 14.0 10-20 14000 50000 GaP Green 565 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 KW1-3001CG GaP Super Green 570 30 100 50 100 11.0 12.0 15.0 10-20 4000 8500 KW1-3001C6 GaAsP/GaP Yellow 585 30 100 50 100 11.0 12.0 15.0 10-20 3600 8000 Part No. Raw Material Emitted Color KW1-3001A3 GaAsP/GaP Hi-Eff. Red KW1-3001AS GaAlAs Super Red GaP Green KW1-3001AG GaP KW1-3001A6 KW1-3001A2 KW1-3001C2 Common Anode Common Cathode Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).