KWL-1515Uxx SERIES Light Bar Display DESCRIPTION: PACKAGE DIMENSIONS The KWL-1515Uxx series is 15.00mm x 15.00mm square type light bar display designed for a variety of applications where a large source of light is required, such as panel indicators, backlight legends and light arrays. 15.0(0.59) 13.50(0.531) 13.50(0.531) 15.0(0.59) PIN 1 + o 11.0(0.433) ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC φ0.50(0.02) 6.30(0.248) 2.54*2=5.08(0.2) NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. INTERNAL CIRCUIT DIAGRAM 2 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 1 3 = GREEN = RED o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. KWL-1515A32 KWL-1515ASG KWL-1515A26 KWL-1515C32 KWL-1515CSG Absolute Maximum Ratings Electro-optical Characteristic Length ∆λ Pd If Hi-Eff Red 635 45 100 50 100 1.7 1.9 2.6 10-20 4.0 12.0 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 3.5 10.0 GaAlAs Super Red Common 660 20 100 50 100 1.5 1.9 2.6 10-20 10.0 20.0 GaP Super Green Anode 570 30 100 50 100 1.7 2.2 2.6 10-20 4.5 15.0 GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 3.5 10.0 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 3.5 10.0 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 1.7 1.9 2.6 10-20 4.0 12.0 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 3.5 10.0 GaAlAs Super Red Common 660 20 100 50 100 1.5 1.9 2.6 10-20 10.0 20.0 Super Green Cathode 570 30 100 50 100 1.7 2.2 2.6 10-20 4.5 15.0 Raw Material Emitted Color GaAsP/GaP GaP KWL-1515C26 Wave C.C or C.A If If Vf (V) Iv (mcd) (Peak) (Rec) Per Chip λρ (nm) (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 3.5 10.0 GaP Green 565 30 100 50 100 1.7 2.2 2.6 10-20 3.5 10.0 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).