KW4-251 SERIES LED Numeric Display Four Digit (0.25") PACKAGE DIMENSIONS The KW4-251 series is 0.25 inch (6.20mm) height four digit display. All devices are available as either common anode or common cathode. O 3.50 0.80 6.2(0.25") 10.0 11.00 DESCRIPTION: + 6.00 PIN 1 6.00 6.00 5.10 36.00 φ0.50 o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) 8.40 Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC 2.54 x 11 = 27.94 DIG.1 DIG.2 D1 DIG.3 D4 D3 D5 D6 Unit V nm nm µA µ cd C D L D8 INTERNAL CIRCUIT DIAGRAM 5 3 17 18 16 8 DIG.2 10 DIG.3 13 DIG.4 D1 D2 D3 A B C D E F G A B C D E F G D4 D5 A B C D E F G D6 A B C D E F G D7 L D8 23 2 1 15 19 11 4 21 20 22 Symbol Vf λρ ∆λ Ir Iv B E DIG.1 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity D7 G F D2 24 NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. DIG.4 A 24 Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 7 6 5 3 DIG.1 9 17 18 16 8 DIG.2 DIG.3 14 10 12 13 DIG.4 D1 D2 D3 A B C D E F G A B C D E F G D4 D5 A B C D E F G D6 A B C D E F G D7 L D8 23 2 1 15 19 11 4 21 20 22 7 6 9 14 12 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Wave C.C or C.A Electro-optical Data(at 10mA) Absolute Maximum Ratings ∆λ Pd If 700 90 100 50 100 1.7 2.4 2.8 10-20 300 550 635 45 100 50 100 1.7 1.9 2.6 10-20 700 1800 Common 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 Anode 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 Super Green 570 30 100 50 100 1.7 2.2 2.6 10-20 850 1900 GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 600 1500 KW4-251C5 GaP Bright Red 700 90 100 50 100 1.7 2.4 2.8 10-20 300 550 KW4-251C3 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 1.7 1.9 2.6 10-20 700 1800 KW4-251CS GaAlAs Super Red Common 660 20 100 50 100 1.5 1.9 2.6 10-20 1500 5000 KW4-251C2 GaP Green Cathode 565 30 100 50 100 1.7 2.2 2.6 10-20 700 1600 KW4-251CG GaP Super Green 570 30 100 50 100 1.7 2.2 2.6 10-20 850 1900 KW4-251C6 GaAsP/GaP Yellow 585 30 100 50 100 1.7 1.9 2.6 10-20 600 1500 Part No. Raw Material Emitted Color KW4-251A5 GaP Bright Red KW4-251A3 GaAsP/GaP Hi-Eff. Red KW4-251AS GaAlAs Super Red KW4-251A2 GaP Green KW4-251AG GaP KW4-251A6 Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).