KWA-2001 SERIES Alphanumeric LED Display Single Digit (2.00") DESCRIPTION: PACKAGE DIMENSIONS The KWA-2001 series is 2.00 inch (50.80mm) height 16-segment single digit alphanumeric displays with the right DP. This series is suitable for use in instrument panels, digital readout displays. All devices are available as either common anode or common cathode. 29.20(1.150) o 48.0(1.89) 65.00(2.559) 50.80(2.00) 10 + PIN 1. φ4.5(0.177) 45.00(1.772) o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) A1 A2 Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC F 11.00(0.433) φ0.50(0.02) E 2.54*8=20.30 H G1 N M J K B G2 L C D1 D2 DP J 2 K L M 17 14 6 P DP 7 12 J 2 K L M 17 14 6 P DP 7 12 INTERNAL CIRCUIT DIAGRAM 11 NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. A1 A2 B C D1 D2 E 1 18 16 13 9 10 8 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd F G1 G2 H 4 5 15 3 11 Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA A1 A2 B C D1 D2 E 1 18 16 13 9 10 8 F G1 G2 H 4 5 15 3 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Wave C.C or C.A Electro-optical Data(at 10mA) Absolute Maximum Ratings ∆λ Pd If 635 45 100 50 100 6.8 9.6 10.4 10-20 2000 6000 660 20 100 50 100 6.0 7.6 10.4 10-20 12000 42000 565 30 100 50 100 6.8 9.6 10.4 10-20 1800 5400 Super Green 570 30 100 50 100 6.8 9.6 10.4 10-20 2000 5700 GaAsP/GaP Yellow 585 30 100 50 100 6.8 9.6 10.4 10-20 1800 5400 KWA-2001C3 GaAsP/GaP Hi-Eff Red 635 45 100 50 100 6.8 9.6 10.4 10-20 2000 6000 KWA-2001CS GaAlAs Super Red 660 20 100 50 100 6.0 7.6 10.4 10-20 12000 42000 GaP Green 565 30 100 50 100 6.8 9.6 10.4 10-20 1800 5400 KWA-2001CG GaP Super Green 570 30 100 50 100 6.8 9.6 10.4 10-20 2000 5700 KWA-2001C6 GaAsP/GaP Yellow 585 30 100 50 100 6.8 9.6 10.4 10-20 1800 5400 Part No. Raw Material Emitted Color KWA-2001A3 GaAsP/GaP Hi-Eff. Red KWA-2001AS GaAlAs Super Red GaP Green KWA-2001AG GaP KWA-2001A6 KWA-2001A2 KWA-2001C2 Common Anode Common Cathode Length λρ (nm) If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).