MA-COM MABACT0010

1:1 Transmission line
Transformer
Rev B
MABACT0010
4.5 - 3000 MHz
SM-22B
Features:
• Surface Mount
• 1:1 Impedence
• Available on tape & reel
123
Description
5
4
M/A Com’s MABACT0010 is a 1:1 RF Transmission Line transformer in a low cost surface mount
package.It is ideally suited for high volume CATV/
Broadband applications.
Dimensions in inches [mm]
Tolerance: .xx ± .02, .xxx ± .010
Ordering Information
Part Number
Package
MABACT0010
Tape & Reel
Electrical Specifications: 25°C, Impedance = 75 Ohms
Parameter
Frequency (MHz)
Units
Minimum
Typical
Maximum
Frequency Range
4.5 - 3000
Insertion Loss
4.5-1000
dB
-
0.8
1.0
Insertion Loss
1000-2000
dB
-
1.6
2.0
Insertion Loss
2000-3000
dB
-
2.5
3.5
Amplitude Unbalance
4.5-1000
dB
-
0.5
1.0
Phase Unbalance
4.5-1000
°
-
10
20
1
1:1 Transmission line Transformer, 4.5-3000MHz
Absolute Maximum Ratings
Parameter
MABACT0010
Pin Configuration
Maximum
Function
Pin #
250mW
Secondary
1
30mA
Not Connected
2
Operating temperature
-40°C - +85°C
Secondary Dot
3
Storage temperature
-40°C - +85°C
Primary Dot
4
Primary
5
RF input power
DC current
Schematic
Insertion Loss Port
Input Impedence
Amplitude Unbalance
Phase Unbalance
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is
considering for development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has
under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline
has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is
not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
2