PESDA6V1L ESD Protector Description The PESDA6V1L is a Transient Voltage Suppressor Arrays that designed to protect components which are connected to data and transmission lines against electrostatic discharge(ESD), electrical fast transients(EFT), and lightning. All pins are rated to withstand 20kv ESD pulses using the IEC61000-4-2 contact discharge method, which can meet the requirement of level 4. Feature ¾ 300 Watts peak pulse power (tp=8/20μs) ¾ Low clamping voltage ¾ Protects one bidirectional or two unidirectional lines ¾ Working voltages: 5V ¾ ESD Protection > 20 kilovolts ¾ Complies with 61000-4-2(ESD):Air-15kV, Contact-8kV 61000-4-4(EFT):40A-5/50ns 61000-4-5(Surge):16A, 8/20µs Applications ¾ Cellular Handsets and Accessories ¾ Portable Electronics ¾ Control & Monitoring Systems ¾ Servers, Notebooks, and Desktop PCs ¾ Set-Top Box ¾ Communication Systems Electrical characteristics per line@25℃( unless otherwise specified) Parameter Symbol Reverse Stand-off Voltage VRWM Reverse Breakdown Voltage VBR It = 1mA Reverse Leakage Current IR VRWM = 5V T=25℃ Clamping Voltage VC IPP = 1A Clamping Voltage VC Junction Capacitance Cj Rev.04 Conditions Min. Typ. Max. Units 5 V 6 V 20 μA tP = 8/20μS 9.0 V IPP=16A tP = 8/20μS 20.5 V VR=0V 1 f = 1MHz 120 pF www.prisemi.com Low Capacitance ESD Protector PESDA6V1L Typical Characteristics Rating Symbol Value Units Lead Soldering Temperature TL 260 (10 sec) ℃ Operating Temperature TJ -55 to +125 ℃ Storage Temperature TSTG -55 to +150 ℃ Absolute maximum rating@25℃ Rev.04 2 www.prisemi.com Low Capacitance ESD Protector PESDA6V1L Product dimension Rev.04 3 www.prisemi.com Low Capacitance ESD Protector PESDA6V1L IMPORTANT NOTICE and are registered trademarks of Prisemi Electronics Co., Ltd (Prisemi) ,Prisemi reserves the right to make changes without further notice to any products herein. Prisemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Prisemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in Prisemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Prisemi does not convey any license under its patent rights nor the rights of others. The products listed in this document are designed to be used with ordinary electronic equipment or devices, Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Website: http://www.prisemi.com For additional information, please contact your local Sales Representative. ©Copyright 2009, Prisemi Electronics is a registered trademark of Prisemi Electronics. All rights are reserved. Rev.04 4 www.prisemi.com