CORCOM Product Guide Inductive Filtering Modular RJ Jacks L Series UL Recognized CSA Certified RJ11 with Block Filter RJ11 RJ45 with Sleeve Filter RJ45 Specifications Contacts: L Series Inductive filtering in a direct retrofit to standard unfiltered RJ11, RJ45, or handset jacks. Offered with standard ferrite sleeve inductors or higher performance ferrite blocks, the L series is available with or without a shield. Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (500 mating cycles) Phosphor Bronze 50 microinches gold 100 microinches nickel 20 milliohms max. 30 milliohms max. Ferrites: Part Numbers Inductor Filter RJH-4L-B RJ11-2L-S RJ11-2L-B RJ11-4L-S RJ11-4L-B RJ11-6L-S RJ11-6L-B High resistivity, nickel zinc ceramic Single-aperture cylinders Multi-aperture rectangular prism Shield Material: Tin-plated copper alloy Housing Material: Glass-filled polyester (UL94V-0) Dielectric Withstanding Voltage: Line-to-line and line-to-ground RJ45-6L1-S RJ45-6L1-B RJ45-6L2-S RJ45-6L2-B RJ45-8L1-S RJ45-8L1-B RJ45-8L2-S RJ45-8L2-B 1000 VAC for 60 seconds Printed Circuit Board Retention: Before soldering: After soldering: 1 lb. minimum 20 lb. minimum Model dimensions and PC board layout on pages 170 to 174. Signal Line Products Inductor Filter and Shield RJ11-2L2-B RJ11-4L1-S RJ11-4L1-B RJ11-4L2-S RJ11-4L2-B RJ11-6L1-S RJ11-6L1-B RJ11-6L2-S RJ11-6L2-B RJ45-6L-S RJ45-6L-B RJ45-8L-S RJ45-8L-B Type: Sleeves: Block: Typical Impedance in Ohms 150 140 130 120 110 100 Impedance in Ohms 90 80 70 60 50 40 30 20 10 0 Shield 2 Shield 1 1 25 100 200 500 Frequency in MHz See page 167 for the CORCOM new low profile RJ Jacks. 175 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide L Series - Ganged Version L - Ganged Series 6RJ11 4RJ11 UL Recognized CSA Certified 2RJ11 with Block Filter L - Ganged Series Specifications Ganged version of our L series filtered jacks. Available in RJ11 models with block inductors in gangs of 2, 4, or 6. Retrofits existing unfiltered ganged jack footprints. Contacts: Typical Impedance in Ohms 150 140 130 120 110 Phosphor Bronze 50 microinches gold 100 microinches nickel 20 milliohms max. 30 milliohms max. Ferrites: 100 90 Impedance in Ohms Material: Plating: Barrier underplating: Resistance: Initial: After durability testing: (500 mating cycles) Type: Block: 80 70 60 High resistivity, nickel zinc ceramic Multi-aperture rectangular prism Housing Material: 50 40 Glass-filled polyester (UL94V-0) Dielectric Withstanding Voltage: Line-to-line and line-to-ground 30 20 1000 VAC for 60 seconds 10 0 1 25 100 200 Printed Circuit Board Retention: Before soldering: After soldering: 500 Frequency in MHz 1 lb. minimum 20 lb. minimum Model Dimensions and PC Board Layout .050 1.27 A .470 11.94 Part Numbers 2RJ11-6L-B 4RJ11-6L-B 6RJ11-6L-B B C .325 8.25 .100 2.54 .050 [1.27] + .008 .030 - .003 Dia. .250 .350 [8.89] [6.35] .128 + .003 Dia. D Ports .810 20.57 2 4 .590 14.99.040 1.02 6 .195 .410 10.41 A .99 25.15 1.93 49.02 2.87 72.9 B .87 22.1 1.81 45.97 2.75 69.85 C .795 20.19 1.735 44.07 2.675 67.95 D .87 22.1 1.81 25.97 2.75 69.85 .165 4.19 176 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions Standard Profile RJ Jack Dimensions For the L, LC, LCT and X Series of RJ Jack Filters RJ11 (No Shield) RJ11 (Style 2 Shield) .900 22.86 .800 20.32 .810 20.57 .620 15.75 .520 13.21 .590 14.99 .780 19.81 .040 1.02 .04 1.02 .195 4.95 .165 4.19 .195 4.95 .322 8.19 .165 4.19 .165 4.19 .395 10.03 .485 12.32 .322 8.18 6 6 5 4 3 2 .520 13.21 4 2 5 3 .540 13.72 1 1 Part Numbers RJ11-2L-S RJ11-4L-S RJ11-6L-S RJ11-2L-B RJ11-4L-B RJ11-6L-B Part Numbers RJ11-2LC2-S RJ11-4LC2-S RJ11-6LC2-S RJ11-2X RJ11-4X RJ11-6X RJ11 (Style 1 Shield) RJ11-2LC2-B RJ11-4LC2-B RJ11-6LC2-B RJ11-4L2-S RJ11-6L2-S RJ11-4L2-B RJ11-6L2-B RJ11-6LCT2-S RJ11-6LCT2-B RJ11 (PC Board Layout) .900 22.86 .860 21.84 .840 21.34 .780 19.81 .04 1.02 .195 4.95 .165 4.19 .165 4.19 .322 8.18 .485 12.32 6 4 2 5 3 .540 13.72 1 Part Numbers RJ11-2LC1-S RJ11-4LC1-S RJ11-6LC1-S RJ11-2LC1-B RJ11-4LC1-B RJ11-6LC1-B RJ11-4L1-S RJ11-6L1-S RJ11-4L1-B Shown from Component Side For all RJ11 L, LC, LCT and X Series Models RJ11-6L1-B RJ11-6LCT1-S RJ11-6LCT1-B 182 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters RJ45 (No Shield) RJ45 (Style 2 Shield) .700 17.78 .600 15.24 .900 22.86 .800 20.32 .810 20.57 .540 13.72 .780 19.81 .04 1.02 .04 1.02 .165 4.19 .195 4.95 .322 8.18 .195 4.95 .165 4.19 .165 4.19 .395 10.03 .322 8.18 .485 12.32 8 7 8 6 7 5 6 4 5 3 4 2 .620 15.75 3 1 2 1 Part Numbers RJ45-6L-S RJ45-8L-S RJ45-6L-B RJ45-8L-B RJ45-6X RJ45-8X Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-S RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-B RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B RJ45 (PC Board Layout) RJ45 (Style 1 Shield) .900 22.86 .860 21.84 .920 23.37 .322 8.18 .350 8.89 .250 6.35 .076±.003 Dia. 1.93±.08 (4 PLACES) .780 19.81 .04 1.02 .195 4.95 3 .450 11.43 .165 4.19 5 7 .165 4.19 .322 8.18 .210 5.33 4 3 .050 1.27 (7 SPACES) 4 6 .090 .050 2.29 1.27 .128±.003 Dia. 3.25±.08 (4 PLACES) .345 8.76 Shown from Component Side 8 7 6 2 8 .485 12.32 5 Signal Line Products .030 +.008/.003 Dia. .76 +.20/-.08 (8 PLACES) 1 .620 15.75 For all RJ45 L, LC, LCT and X Series Models. 2 1 Part Numbers RJ45-6LC1-S RJ45-6L1-S RJ45-8LCT1-S RJ45-8LC1-S RJ45-8L1-S RJ45-8LCT1-B RJ45-6LC1-B RJ45-6L1-B RJ45-8LC1-B RJ45-8L1-B Part Numbers RJ45-6LC2-S RJ45-6L2-S RJ45-8LCT2-B RJ45-8LC2-S RJ45-8L2-S RJ45-8LCT2-S RJ45-6LC2-B RJ45-6L2-B RJ45-8LC2-B RJ45-8L2-B 183 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Standard Profile RJ Jack Dimensions (cont'd) For the L, LC, LCT and X Series of RJ Jack Filters Low Profile RJ Jack Dimensions For the N and Z Series of RJ Jack Filters RJH (No Shield) RJ11 (Low Profile - No Shield) .540 13.72 .440 11.18 .810 20.57 .590 14.99 .620 15.75 .520 13.21 .710 18.03 .485 12.32 .04 1.02 .010 .25 .135 3.43 .165 4.19 .195 4.95 .322 8.18 .217 5.51 .395 10.03 .400 10.16 6 5 4 4 3 2 3 .520 13.21 1 2 1 .250 6.35 Part Numbers RJH-4-L-B .350 8.89 RJH (No Shield - PC Board Layout) .300 7.62 Edge of board .322 8.18 Part Numbers RJ11-6N-B RJ11-6Z RJ11 Low Profile (Style 3 Shield) .740 18.80 .910 Max. 23.11 .350 8.89 .250 6.35 .030 +.008/-.003 Dia. .76 +20/-.08 (4 holes) .515* 13.08 .010 .25 1 3 RJ11-6N-S 2 .120 3.05 .135 3.43 .165 4.19 4 .075 1.91 .050 1.27 (3 Spaces) .430 10.92 .217 5.51 .128±.003 Dia. 3.25±.08 (2 holes) 6 4 2 Shown from Component Side 5 3 .550 13.97 1 All tolerances ±0.010 [0.25] unless otherwise noted. Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 *To top of shield 184 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ11 Low Profile (Style 4 Shield) .620 15.75 RJ45 Low Profile (No Shield) .740 18.80 .515* 13.08 .010 .25 .515 13.08 .120 3.05 .010 .25 .430 10.92 6 4 2 RJ11-6N4-S .217 5.51 .550 13.97 3 2 1 .080 2.03 4 6 .120 3.05 3 5 3 .550 13.97 1 Part Numbers RJ11-6N3-B RJ11-6N3-S RJ11-6Z3 RJ45 Low Profile (Style 3 Shield) .030 + .008/- .003 Dia. .76 +.20/-.08 (6 PLACES) .740 18.80 .515* 13.08 .050 (5 SPACES) 1.27 .128±.003 Dia. 3.25±.08 (2 HOLES) 5 .120 3.05 .075 1.91 Signal Line Products 2 .400 10.16 4 .99 Max. 25.15 1 .430 10.92 6 5 RJ11-6Z4 .350 8.89 .250 6.35 .135 3.43 .165 4.19 .217 5.51 RJ11 Low Profile (PC Board Layout) .076±.003 1.93±.08 Dia. (2 PLACES) .120 3.05 .135 .165 3.43 4.19 .217 5.51 Part Numbers RJ11-6N4-B .740 18.80 .910 Max. 23.11 .135 .165 3.43 .4.19 .217 5.51 .430 10.92 8 7 6 Shown from Component Side 5 4 3 For all RJ11 N and Z Series Models .630 16.00 2 1 Part Numbers RJ45-8N3-B RJ45-8N3-S RJ45-8Z3 *To top of shield 185 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Model Dimensions (Continued) Low Profile RJ Jack Dimensions (cont'd) For the N and Z Series of RJ Jack Filters RJ45 Low Profile (Style 4 Shield) .740 18.80 .700 17.78 .515* 13.08 .010 .25 .120 3.05 .135 3.43 .217 5.51 .165 4.19 .430 10.92 8 7 6 5 4 3 .630 16.00 2 1 Part Numbers RJ45-8N4-B RJ45-8N4-S RJ45-8Z4 *To top of shield RJ45 Low Profile (PC Board Layout) .076±.003 Dia. 1.93±.08 (2 Places) .217 5.51 .350 8.89 .250 6.35 .030 +.008/-.003 Dia. .76 +.20/-.08 (8 Places) 1 3 .450 11.43 5 7 2 .050 (7 Spaces) 1.27 4 6 8 .095 2.41 .120 3.05 .050 1.27 .128±.003 Dia. 3.25±.08 (2 Places) Shown from Component Side For all RJ45 N and Z Series Models All tolerances ±0.010 [0.25] unless otherwise noted. 186 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com