BCV71 BCV71 NPN General Purpose Amplifier • This device is designed for general purpose applications at collector currents to 300mA. • Sourced from process 10. 3 2 1 SOT-23 Mark: K7 1. Base 2. Emitter 3. Collector Absolute Maximum Ratings * Ta=25°C unless otherwise noted Symbol VCEO Parameter Collector-Emitter Voltage Value 60 Units V VCBO VEBO Collector-Base Voltage 80 V Emitter-Base Voltage 5.0 V IC Collector current (DC) 500 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 ~ +150 °C * These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics Ta=25°C unless otherwise noted Symbol Parameter Test Condition Off Characteristics Collector-Base Breakdown Voltage V(BR)CBO Min. Typ. Max. Units IC = 10µA, IE = 0 80 V IC = 2mA, IB = 0 60 V Emitter-Base Breakdown Voltage IE = 10µA, IC = 0 5.0 Collector Cutoff Current VCB = 20V, IE = 0 VCB = 20V, IE = 0, Ta = 100°C V(BR)CEO Collector-Emitter Breakdown Voltage V(BR)EBO ICBO V 100 10 nA µA On Characteristics hFE DC Current Gain IC = 2.0mA, VCE = 5.0V VCE(sat) Collector-Emitter Saturation Voltage IC = 10mA, IB = 0.5mA VBE(on) Base-Emitter On Voltage IC = 2.0mA, VCE = 5.0V 110 220 0.55 0.25 V 0.7 V Thermal Characteristics Ta=25°C unless otherwise noted Symbol PD RθJA Total Device Dissipation Derate above 25°C Parameter Max. 350 2.8 Units mW mW/°C Thermal Resistance, Junction to Ambient 357 °C/W Device mounted on FR-4PCB 40mm × 40mm × 1.5mm ©2004 Fairchild Semiconductor Corporation Rev. A, April 2004 BCV71 Package Dimensions ±0.10 ±0.10 2.40 0.40 ±0.03 1.30 0.45~0.60 0.20 MIN SOT-23 0.03~0.10 0.38 REF 0.40 ±0.03 +0.05 0.12 –0.023 0.96~1.14 0.97REF 2.90 ±0.10 0.95 ±0.03 0.95 ±0.03 1.90 ±0.03 0.508REF Dimensions in Millimeters ©2004 Fairchild Semiconductor Corporation Rev. A, April 2004 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT Quiet Series™ ActiveArray™ FAST Bottomless™ FASTr™ CoolFET™ FPS™ CROSSVOLT™ FRFET™ DOME™ GlobalOptoisolator™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ FACT™ i-Lo™ Across the board. Around the world.™ The Power Franchise Programmable Active Droop™ ImpliedDisconnect™ PACMAN™ POP™ ISOPLANAR™ Power247™ LittleFET™ MICROCOUPLER™ PowerSaver™ PowerTrench MicroFET™ QFET MicroPak™ QS™ MICROWIRE™ QT Optoelectronics™ MSX™ Quiet Series™ MSXPro™ RapidConfigure™ OCX™ RapidConnect™ OCXPro™ SILENT SWITCHER OPTOLOGIC SMART START™ OPTOPLANAR™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I10