Preliminary Technical Data FEATURES Low Broadband Jitter, < 500 Femtoseconds RMS On-Chip 2.60 GHz – 2.95 GHz VCO Low Phase Noise, Integer-N Frequency Synthesizer Digital or Analog PLL Lock Detect Programmable Delays in R and N path Supports Internal or External VCO Two Reference Clock Inputs, A and B Frequencies to 250 MHz On-Chip Reference Clock Monitors Auto and Manual Switchover, Holdover Up to 14 Low Jitter Clock Drivers Six LVPECL Outputs Operate to Max VCO Frequency Four/Eight LVDS/CMOS outputs run 1 GHz/250 MHz Programmable Dividers with Phase Offset Programmable Delay on Four Channels Serial Control Port 64-lead LFCSP package 14-Channel Clock Generator with Integrated 2.8 GHz VCO AD9516-0 On-chip dividers may be set to any integer value, 1-32. In addition, the LVDS/CMOS channels use cascaded dividers for a maximum divide ratio of 1024. Each LVDS/CMOS channel also offers an adjustable delay from 1.5 ns to 10 ns, programmed as 64 steps. The AD9516-0 is available in a 64-lead LFCSP and may be operated from a single 3.3 V supply. If an external VCO is used, the VCP pin may be set to a max value of 5.5V. The power supply to the LVPECL outputs may be varied to support 2.5V or 3.3V LVPECL outputs. The AD9516-0 operates over the standard industrial range of-40°C to +85°C. A ÷R B VCO z APPLICATIONS Low Jitter Clock Generation and Clock Distribution Wired and Wireless Infrastructure Base Stations, Optical Networks, Cable Head-Ends Instrumentation and Imaging Test Equipment, ATE Clean Clocks for ADCs, DACs, DDSs, DDCs, DUCs, MxFEs Clock Cleanup and Distribution for Line Cards CP PFD ÷N 6 LVPECL OUTPUTS z z DIVIDER z DIVIDER z z DIVIDER z GENERAL DESCRIPTION The AD9516-0 generates up to fourteen output clocks from a single input reference frequency. Integrated on chip is a complete PLL with VCO, programmable dividers, adjustable delay blocks, and multiple output logic stages. Sub-picosecond jitter performance is maintained using on-chip 2.60 – 2.95 GHz VCO. The AD9516 also supports the use of an external VCO/VCXO/VCSO up to 2.4 GHz. The AD9516-0 features six LVPECL outputs (grouped in three pairs), which operate up to the maximum frequency of on-chip VCO. The remaining outputs are user-programmed as either LVDS (four max) or CMOS (eight max). The programmable outputs operate to 1 GHz in LVDS mode and to 250MHz in CMOS mode. 4/8 LVDS/CMOS OUTPUTS z DIVIDER z DELAY DELAY DIVIDER AD9516-0 z DELAY DELAY Figure 1. Basic Block Diagram Rev. prA Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2005 Analog Devices, Inc. All rights reserved. Preliminary Technical Data AD9516-0 OUTLINE DIMENSIONS a 64-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 9 x 9 mm Body, Very Thin Quad (CP-64-4) Dimensions shown in millimeters 9.00 BSC SQ 0.60 MAX 8.75 BSC SQ TOP VIEW 17 16 7.50 REF 0.80 MAX 0.65 TYP 0.05 MAX 0.02 NOM 0.50 BSC 0.20 REF COMPLIANT TO JEDEC STANDARDS MO-220-VMMD-4 Figure 2. Outline Dimensions ©2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. PR06419-0-10/06(PrA) Rev. prA | Page 2 of 2 122105-0 SEATING PLANE 33 32 PIN 1 INDICATOR 6.35 6.20 SQ 6.05 EXPOSED PAD (BOTTOM VIEW) 0.45 0.40 0.35 12° MAX 64 1 49 48 PIN 1 INDICATOR 1.00 0.85 0.80 0.30 0.25 0.18 0.60 MAX