Series LP300 Programmers and Shorting Plugs FEATURES: • Shorting plugs mate with any .300 [7.62] center DIP socket to provide custom programming. • Stacks on .100 [2.54] centers. • Converts any socket into a DIP switch. SPECIFICATIONS: • Standard plug body material is Black UL94-V/0 4/6 Nylon. • Pins are 3/4 hard Brass. • Pin plating is 10 μ [.25μm] min. Gold per MIL-G-45204 over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290. • Current rating=2 Amps. • Operating temperature= -67° to 257°F [-55°C to 125°C] ALL DIMENSIONS: INCHES [MILLIMETERS] Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. ORDERING INFORMATION All tolerances ± .005 [.13] unless otherwise specified Specify Part No. LP300 for LO-PRO®file plug with Gold plating LP300 (LO-PRO®file plug) Bristol, PA USA TEL: (215) 781-9956 FAX: (215) 781-9845 abc 16003 REV. D PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED http://www.arieselec.com • [email protected]