M3T-100LCC-80QSB Converter from 100-pin 0.65mm-pitch LCC to 80-pin 0.65mm-pitch QFP (for M16C/60 Series) External View and Dimensions Function This converter connects a 100-pin 0.65mm-pitch LCC (100D0) to the foot pattern for the 80-pin 0.65mm-pitch QFP (80P6S-A). Use this board to convert packages from the 100-pin LCC package for the M16C/60 Series MCU to the 80-pin QFP foot pattern. Application Solder the TQPACK080SB (included with the product) to the foot pattern for 80-pin 0.65mm-pitch QFP (80P6S-A) provided on the target. By attaching M3T-FLX-100LCC to the connector provided on this board you can connect an emulation pod for the M16C/60 Series and this board. Package Components • M3T-100LCC-80QSB • TQSOCKET080SBG (made by Tokyo Eletech Co., Ltd.) • TQPACK080SB (made by Tokyo Eletech Co., Ltd.) Foot Pattern Reference Dimensions • User's manual See Appendix E "List of TQPACK/NQPACK Foot Patterns Made *Required components to connect to the target system are included with this product package. Each component made by Tokyo Eletech Co., Ltd. is optionally available alone from Tokyo Eletech Co., Ltd. See Appendix G "Contact Addresses for Partner Products". by Tokyo Eletech Co., Ltd." [Ordering Information] See Appendix H "Ordering Information". *All brand names and product names are trademarks or registered trademarks of their respective companies.