VESDxx-02V Vishay Semiconductors Single ESD Protection Diode in SOD523 Features • • • • • • Small SOD-523 package Low leakage current e3 ESD protection to IEC 61000-4-2 15 kV (air) ESD protection to IEC 61000-4-2 8 kV (contact) Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 1 18554 Mechanical Data Case: SOD-523 Plastic case Molding Compound Flammability Rating: UL 94 V-0 Terminals: High temperature soldering guaranteed: 260 °C/10 sec. at terminals Weight: approx. 1.6 mg Packaging Codes/Options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/3 k per 7" reel (8 mm tape), 15 k/box Absolute Maximum Ratings Ratings at 25 °C ambient temperature unless otherwise specified Symbol Value Unit ESD air discharge per IEC 61000-4-2 Parameter Test condition VESD 15 kV ESD contact discharge per IEC 61000-4-2 VESD 8 kV Symbol Value Unit TJ - 40 to + 125 °C TSTG - 55 to + 150 °C Thermal Characteristics Ratings at 25 °C ambient temperature unless otherwise specified Parameter Operating temperature Storage temperature Document Number 85857 Rev. 1.3, 11-Dec-06 Test condition www.vishay.com 1 VESDxx-02V Vishay Semiconductors Electrical Characteristics Partnumber Marking Code Reverse Stand-off Voltage Max. Reverse Current Max. Clamping Voltage Max. Peak Pulse Current Min. Reverse Breakdown Voltage Capacitance @ IRmax @ VRWM @ IPPM (see Fig. 1) (see Fig. 1) @ IR = 1 mA @ VR = 0 V, f = 1 MHZ VRWM IR VC IPPM VBR CD V μA V A V pF 100 9 7 1.5 180 VESD01-02V A* ) 1 VESD03-02V B*) 3 20 12 9 4 110 VESD05-02V C* ) 5 0.1 20 6 6.5 55 VESD08-02V D*) 8 0.1 30 4 9 35 VESD12-02V ) 12 0.1 25 2 14 30 E* *) Number turned by 180° Typical Characteristics Tamb = 25 °C unless otherwise specified 35 120 80 60 20 µs to 50 % 40 VESD08-02V 30 100 V C - Clamping Voltage (V) IPP - Peak Pulse Current (%) 8 µs to 100 % 20 VESD12-02V 25 20 VESD05-02V 15 VESD03-02V 10 5 VESD01-02V 0 0 0 5 10 19015 15 20 25 t - Time (µs) 30 35 0 40 Figure 1. Pulse Waveform 8/20 μs acc. IEC 61000 - 4 - 5 1 2 3 4 5 6 100 80 VESD03-02V 60 VESD08-02V 40 VESD05-02V 20 100 VESD01-02V VESD05-02V 10 1 VESD12-02V 0.1 0.7 0 0 19011 2 4 6 8 10 12 14 VR - ReverseVoltage (V) Figure 2. Typ. Diode Capacitance vs. Reverse Voltage www.vishay.com 2 10 VESD08-02V VESD03-02V I F - Forward Current (mA) CD - Diode Capacitance (pF) VESD01-02V 120 9 VESD12-02V 1000 f = 1 MHz 140 8 Figure 3. Clamping Voltage vs. Peak Pulse Current 180 160 7 IPP - Peak Pulse Current (A) 19014 19012 0.75 0.8 0.85 0.9 0.95 VF - Forward Voltage (V) Figure 4. Forward Current vs. Forward Voltage Document Number 85857 Rev. 1.3, 11-Dec-06 VESDxx-02V Vishay Semiconductors 10 18 14 12 VESD08-02V 10 8 VESD05-02V 6 4 2 0 0.01 19013 VESD12-02V 9 VESD12-02V V F - Forward Voltage (V) V R - Reverse Voltage (V) 16 VESD03-02V VESD01-02V VESD03-02V 8 7 VESD01-02V 6 5 VESD05-02V 4 3 VESD08-02V 2 1 0 0.1 1 10 100 1000 0 IR - Reverse Current (µA) 2 Figure 5. Reverse Voltage vs. Reverse Current 4 6 8 10 12 14 16 18 20 IPP - Peak Pulse Cureent (A) 19061 Figure 6. Typical Forward Voltage vs. Peak Pulse Current 0.2 [0.008] 0.1 [0.004] 0.7 [0.028] 0.5 [0.020] Package Dimensions in mm (Inches): SOD523 0.9 [0.035] 1.7 [0.067] 1.5 [0.059] 0.7 [0.028] 0.4 [0.016] 0.35 [0.014] 0.25 [0.010] foot print recommendation: 1.45 [0.057] 1.3 [0.051] 1.1 [0.043] 0.35 [0.014] Document no.: S8-V-3880.02-001 Rev. f - Date: 25. January. 2005 16864 Document Number 85857 Rev. 1.3, 11-Dec-06 www.vishay.com 3 VESDxx-02V Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85857 Rev. 1.3, 11-Dec-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1